User manual

13.4 The inlet hose
20
O
20
O
45
O
45
O
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no leaks
from the couplings.
Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.
Water pressure
The appliance works correctly if the wa-
ter pressure is not less than 0.05 MPa
(0.5 bar).
If you can not connect the water inlet
hose to the cold water tap of the primary
hydraulic system, connect it to your do-
mestic cold water storage system.
Make sure not to have more than a dis-
tance of 5.02 m (16.5 ft) between the ap-
pliance inlet hose and the bottom of the
water storage tank.
ENGLISH 31
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
• Connect the water inlet hose to the
www.devicemanuals.eu
• Connect the water inlet hose to the
cold water tap with 3/4 thread.
www.devicemanuals.eu
cold water tap with 3/4 thread.
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
www.devicemanuals.eu
CAUTION!
www.devicemanuals.eu
CAUTION!
Make sure that there are no leaks
www.devicemanuals.eu
Make sure that there are no leaks
www.devicemanuals.eu
www.devicemanuals.eu
Do not use an extension hose if
www.devicemanuals.eu
Do not use an extension hose if
the inlet hose is too short. Con-
www.devicemanuals.eu
the inlet hose is too short. Con-
tact the service centre for the re-
www.devicemanuals.eu
tact the service centre for the re-
placement of the inlet hose.
www.devicemanuals.eu
placement of the inlet hose.