L 98685 FL L 98485 FL DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 9. 10. 11. 12. 13. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TECHNISCHE DATEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage oder Verwendung Schäden verursacht.
www.aeg.com Ein falsch eingesetzter Filter führt zu Wasserlecks. forderliche Abstand zwischen Gerät und Teppich vorhanden ist. 1.5 Innenbeleuchtung Wasseranschluss Die Innenbeleuchtung des Geräts wird automatisch beim Öffnen der Tür eingeschaltet und beim Schließen der Tür ausgeschaltet. • Schließen Sie das Gerät nicht mit gebrauchten Schläuchen an. Verwenden Sie nur neue Schläuche. • Achten Sie darauf, die Wasserschläuche nicht zu beschädigen.
DEUTSCH 2. Schneiden Sie das Netzkabel ab und entsorgen Sie es. 3. Entsorgen Sie die Türverriegelung, damit Kinder oder Haustiere nicht in 5 dem Gerät eingeschlossen werden können. Es besteht Erstickungsgefahr (dies gilt nur für Frontlader). 2. TECHNISCHE DATEN Abmessungen Breite / Höhe / Tiefe 600 / 850 / 600 mm Gesamttiefe 640 mm Elektrischer Anschluss: Spannung Gesamtleistung Sicherung Frequenz 230 V 2200 W 10 A 50 Hz Wasserdruck Min. 0,5 bar (0,05 MPa) Max.
www.aeg.com 7 Ablaufpumpe 11 Netzkabel 8 Schraubfüße zum Ausrichten des Geräts 9 Wasserablaufschlauch 12 Transportschrauben 13 Schraubfüße zum Ausrichten des Geräts 10 Wasserzulaufschlauch 3.1 Zubehörteile 1 1 Schraubenschlüssel 2 4 Zum Lösen der Transportschrauben. 2 Kunststoffkappen Zum Verschließen der Öffnungen auf der Rückseite des Geräts nach dem Entfernen der Transportschrauben. 3 Aqua-Safe-Zulaufschlauch Zur Verhinderung von eventuellen Wasserlecks.
DEUTSCH 4.1 TOUCHSCREEN Tragen Sie zur Betätigung der Tasten keine Handschuhe. Achten Sie darauf, dass Touchscreen und Tasten stets sauber und trocken sind. 4.2 AUTO Off-Taste 1 Drücken Sie diese Taste, um das Gerät ein- oder auszuschalten. Wird das Gerät eingeschaltet, ist eine Tonfolge zu hören. Die Funktion AUTO OFF schaltet das Gerät in den folgenden Fällen automatisch aus, um den Energieverbrauch zu verringern: • Wenn Sie nicht innerhalb von 5 Minuten die Taste 6 drücken.
www.aeg.com C Tür verriegelt Sie können die Tür nicht öffnen, solange dieses Symbol erscheint. Sie können die Tür erst öffnen, wenn das Symbol erlischt. Wenn das Symbol nicht erlischt, obwohl das Programm beendet ist: • Es befindet sich Wasser in der Trommel. • Die Spülstopp -Funktion ist eingeschaltet. • Die Uhrzeit Wenn Sie das Gerät einschalten, zeigt das Display einige Sekunden lang die Uhrzeit an. Informationen zur Änderung der Uhrzeit finden Sie unter „Einstellen der Uhrzeit“.
DEUTSCH 9 • Der Anzeigebalken füllt sich entsprechend der eingestellten Funktion. • Wenn Sie eine nicht verfügbare Funktion wählen, erkennen Sie an der Textzeile, dass die Auswahl nicht möglich ist. Zeit sparen Das Symbol erscheint, wenn Sie eine der folgenden Funktionen einstellen: F Zeitverkürzt Extra Kurz Extra Spülen G Der Anzeigebalken füllt sich entsprechend der Anzahl der Spülgänge. Flecken Vorwäsche H Einweichen Der Anzeigebalken füllt sich entsprechend der eingestellten Funktionen.
www.aeg.com 2. Die Programmkontrolllampe leuchtet und das Display zeigt alle Informationen. Speichern Sie einfach ein neues Programm, um ein zuvor gespeichertes zu löschen. 4.7 START/PAUSE -TASTE 6 Berühren Sie die Taste 6 , um ein Programm zu starten oder zu unterbrechen. 4.8 ZEITVORWAHL -TASTE 7 Berühren Sie die Taste 7 , um den Start eines Programms um 30 Minuten bis 20 Stunden zu verzögern. 4.9 ZEITSPAREN -TASTE 8 Berühren Sie die Taste 8 , um die Programmdauer zu verkürzen.
DEUTSCH 4.14 Funktion „Akustische Signale“ Sie hören akustische Signale, wenn: • Sie das Gerät einschalten. • Sie das Gerät ausschalten. • Sie die Tasten berühren. • Das Programm beendet ist. • Eine Störung des Geräts vorliegt. Zum Deaktivieren/Aktivieren der akustischen Signale berühren Sie die Tasten 10 und 9 6 Sekunden lang gleichzeitig. Bei deaktivierten akustischen Signalen ertönen sie nur noch dann, wenn Sie eine Taste berühren und wenn eine Störung vorliegt. 4.
www.aeg.com Programm Temperatur Wäscheart Wäschegewicht Programmbeschreibung Funktionen Extra Leise 95 °C - Kalt Weiße und bunte Baumwolle, normal verschmutzt. Max. Beladung 8 kg Waschgang Spülgänge Langer Schleudergang Stopp mit Wasser in der Trommel SPÜLSTOPP FLECKEN1) VORWÄSCHE2) EINWEICHEN EXTRA SPÜLEN ZEIT SPAREN3) Pflegeleicht 60 °C - Kalt Spülgänge Kurzer Schleudergang Synthetik- oder Mischgewebe, normal verschmutzt. Max.
DEUTSCH Programm Temperatur Wäscheart Wäschegewicht Programmbeschreibung Funktionen Feinwäsche 40 °C - Kalt Spülgänge Kurzer Schleudergang Feinwäsche, z.B. aus Acryl, Viskose oder Polyester, normal verschmutzt. Max.
www.aeg.com Programm Temperatur Wäscheart Wäschegewicht Programmbeschreibung Funktionen Spülen 0° Alle Gewebe Mit ZusatzMax. Beladung 8 mitteln spükg len Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP EXTRA SPÜLEN7) Jeans 60 °C - Kalt Jeanshosen, hemden oder jacken sowie Trikots aus modernem Gewebe. Max. Beladung 8 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP VORWÄSCHE 2) EINWEICHEN EXTRA SPÜLEN ZEIT SPAREN3) 20 min.
DEUTSCH Programm Temperatur Wäscheart Wäschegewicht Programmbeschreibung Funktionen Energiesparen Baumwolle Eco9) 60° oder 40° Weiße und farbechte Baumwolle, normal verschmutzt10). Max. Beladung 8 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP FLECKEN VORWÄSCHE2) EINWEICHEN EXTRA SPÜLEN ZEIT SPAREN3) 15 1) Bei Temperaturen unter 40 °C nicht verfügbar. 2) Wenn Sie Flüssigwaschmittel benutzen, wählen Sie ein Programm ohne VORWÄSCHE.
www.aeg.com Dampf Auffrischen2) Dieses Programm beseitigt Gerüche. Dampf beseitigt keine Tiergerüche. Dampf Glätten2) Dieses Programm hilft bei der Beseitigung von Falten in der Wäsche. Baumwolle und Synthetik. Für folgende Kleidungsstücke dürfen Sie das Dampfprogramm nicht benutzen: • Wäsche, die laut Kleidungsetikett nicht trocknergeeignet ist. • Wäsche mit Besätzen aus Kunststoff, Metall, Holz o. Ä.
DEUTSCH Programme Beladung (kg) Energieverbrauch (kWh) Wasser- UngefähRestverbrauch re Profeuchte (Liter) gramm(%)1) dauer (in L 98485 Minuten) FL Koch-/ Buntwäsche 60 °C 8 1.50 66 168 44 43 Koch-/ Buntwäsche 40 °C 8 0.90 66 164 44 43 Pflegeleicht 40 °C 4 0.60 48 110 35 35 Feinwäsche 40 °C 4 0.70 58 91 35 35 Wolle/ Handwäsche 30 °C 2 0.35 57 58 30 30 17 Restfeuchte (%)1) L 98685 FL Standardprogramme Bauwolle Standardprogramm Baumwolle 60 °C 8 0.
www.aeg.com 6.1 Einstellen der Sprache Beim ersten Einschalten des Geräts zeigt das Gerät die Standardsprache an und fordert Sie auf, diese Sprache zu bestätigen oder zu ändern. • Drehen Sie den Programmwahlschalter, um die gewünschte Sprache einzustellen. • Sobald das Display die gewünschte Sprache anzeigt, berühren Sie die Taste 6 , um die Auswahl zu bestätigen. Ändern der Sprache nach der ersten Inbetriebnahme • Die Stundenziffern blinken.
DEUTSCH on und im Bereich ( D ) die eingestellte Zeitvorwahl. 7.2 Einfüllen der Wäsche 1. 2. Öffnen Sie die Tür des Geräts. Das Display (E) zeigt die maximale Beladung für das Programm (MAX) und das Gewicht der Wäsche (KG) an. In der Textzeile des Displays werden Sie aufgefordert, die Wäsche einzufüllen. 3. Geben Sie jedes Wäschestück einzeln in die Trommel. Schütteln Sie jedes Wäschestück leicht aus, bevor Sie es in die Trommel geben. 4. Im Display wird das Gewicht in Schritten von 0,5 kg erhöht.
www.aeg.com Waschmittelfach für die Vorwaschphase und das Einweichprogramm. Füllen Sie das Waschmittel für den Vorwaschgang und das Einweichen vor dem Start des Programms ein. Waschmittelfach für die Waschphase. Wenn Sie Flüssigwaschmittel verwenden, muss dieses direkt vor dem Start des Programms eingefüllt werden. Fach für flüssige Pflegemittel (Weichspüler, Stärke). Füllen Sie das Pflegemittel in das Fach ein, bevor Sie das Programm starten. Das ist die maximale Menge für flüssige Pflegemittel.
DEUTSCH 4. 21 Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Klappe in der Position „Unten“: – Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. – Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Markierungslinie auf der Klappe. – Stellen Sie nicht den Vorwaschgang ein. – Stellen Sie nicht die Zeitvorwahl ein. 5. 6. Messen Sie Waschmittel und Weichspüler ab. Schließen Sie die Waschmittelschublade vorsichtig.
www.aeg.com 2. Drücken Sie die Taste 1 erneut, um das Gerät einzuschalten. Anschließend können Sie ein neues Waschprogramm einstellen. Das Gerät pumpt das Wasser nicht ab. 7.8 Ändern einer Funktion Einige Funktionen können nur geändert werden, bevor sie durchgeführt werden. 2. Falls Signaltöne aktiviert sind, ertönt ein Signalton. 3. Im Display erscheint und eine Meldung teilt Ihnen mit, dass das Programm abgeschlossen ist. 4. Die Kontrolllampe der Taste 6 erlischt. 5.
DEUTSCH 23 9. PRAKTISCHE TIPPS UND HINWEISE 9.1 Beladung • Teilen Sie die Wäsche auf, in: Kochwäsche, Buntwäsche, Synthetik, Feinwäsche und Wolle. • Halten Sie sich an die Anweisungen auf den Kleidungsetiketten. • Waschen Sie weiße und bunte Wäsche nicht zusammen. • Manche farbigen Textilien können beim ersten Waschen färben. Wir empfehlen, sie deshalb die ersten Male separat zu waschen. • Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Schließen Sie Gürtel.
www.aeg.com Wasserhärtetabelle Härtegrad Art Wasserhärte °dH °TH mmol/l Clarke 1 weich 0-7 0-15 0-1.5 0-9 2 mittel 8-14 16-25 1.6-2.5 10-16 3 hart 15-21 26-37 2.6-3.7 17-25 4 sehr hart > 21 > 37 >3.7 >25 10. REINIGUNG UND PFLEGE WARNUNG! Trennen Sie das Gerät von der Stromversorgung, bevor Sie es reinigen. 10.1 Entkalken Normales Leitungswasser enthält Kalk. Falls erforderlich, benutzen Sie einen Enthärter, um Kalkablagerungen zu entfernen.
DEUTSCH 25 10.4 Türdichtung Überprüfen Sie regelmäßig die Türdichtung und nehmen Sie alle Einzelteile aus dem Inneren heraus. 10.5 Trommel Überprüfen Sie regelmäßig, dass sich kein Kalk und keine Rostpartikel in der Trommel absetzen. Verwenden Sie zur Entfernung von Rost aus der Trommel nur Spezialprodukte. Vorgehensweise: • Reinigen Sie die Trommel mit einem Spezialreiniger für Edelstahl.
www.aeg.com WARNUNG! 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Entfernen Sie den Filter nicht, während das Gerät in Betrieb ist. Reinigen Sie die Ablaufpumpe nicht, wenn das Wasser im Gerät heiß ist. Das Wasser muss abgekühlt sein, bevor Sie die Ablaufpumpe reinigen. 10.7 Ablaufpumpe Kontrollieren Sie regelmäßig die Ablaufpumpe und sorgen Sie dafür, dass sie sauber ist. Reinigen Sie die Pumpe in folgenden Fällen: • Das Gerät pumpt das Wasser nicht ab. • Die Trommel dreht sich nicht.
DEUTSCH 2 1 10.8 Zulaufschlauchfilter und Ventilfilter Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein. 27 7. Entfernen Sie Flusen und Gegenstände aus der Pumpe. 8. Vergewissern Sie sich, dass sich das Flügelrad der Pumpe drehen kann. Wenn dies nicht möglich ist, wenden Sie sich an den Kundendienst. 9.
www.aeg.com 4. 5. 6. 20° 45° 7. 10.9 Notentleerung 1. Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (6) unter „So reinigen Sie die Ablaufpumpe“ durch. Reinigen Sie bei Bedarf die Pumpe. Bringen Sie den Ablaufkanal wieder in seine ursprüngliche Position und schließen Sie die Ablaufpumpenklappe. Wenn Sie das Wasser über das Notentleerungsverfahren abpumpen, müssen Sie das Abpumpsystem wieder aktivieren: 1.
DEUTSCH 29 11. FEHLERSUCHE Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zunächst eine Lösung für das Problem zu finden, bevor Sie sich an den Kundendienst wenden (siehe Tabelle). Bei einigen Problemen ertönt ein Signalton und das Display zeigt eine Fehlermeldung an. Problem Mögliche Ursache Im Display erDer Wasserhahn ist gescheint die Aufschlossen. forderung, den Wasserhahn zu überprüfen: Das Gerät füllt sich nicht mit Wasser.
www.aeg.com Problem Mögliche Ursache Mögliche Abhilfe Im Display erscheint die Aufforderung, die Tür zu überprüfen: Die Gerätetür steht offen oder ist nicht richtig geschlossen. Schließen Sie die Tür richtig. Das Display meldet einen Wasseralarm. Die Aquasafe-Einrichtung wurde ausgelöst. • Schalten Sie das Gerät aus. • Schließen Sie den Wasserhahn. • Wenden Sie sich hierzu an den Kundendienst.
DEUTSCH Problem 31 Mögliche Ursache Mögliche Abhilfe Der Wasserablaufschlauch ist beschädigt. Vergewissern Sie sich, dass der Wasserzulaufschlauch nicht beschädigt ist. Ein Waschprogramm läuft. Warten Sie das Ende des Waschprogramms ab. Es befindet sich Wasser in der Trommel. Stellen Sie das Abpump- oder Schleuderprogramm ein. Das Gerät ist nicht ausgerichtet. Richten Sie das Gerät waagrecht aus. Siehe hierzu „Montage“.
www.aeg.com Problem Mögliche Ursache Mögliche Abhilfe Nach einem Dampfprogramm sind die Kleidungsstücke nicht glatt genug. Es wurde ein falsches Dampfprogramm gewählt (z. B. Synthetikgewebe anstatt Baumwolle). Achten Sie auf die Zusammensetzung des Gewebes. Das Gerät ist überladen. Verringern Sie die Wäschemenge. Die Trommel ist Das Leergewicht muss leer und im Diseingestellt werden. play wird angezeigt, dass sich Wäsche darin befindet.
DEUTSCH 2. 3. 33 Nehmen Sie die Karton-Abdeckung ab. Entfernen Sie die Styropor-Verpackungsteile. 4. Entfernen Sie die innere Folie. 5. Öffnen Sie die Tür. Entfernen Sie das Styroporteil aus der Türdichtung und alle Teile aus der Trommel. 6. Legen Sie eines der Styroporverpackungsteile hinter dem Gerät auf den Boden. Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. Achten Sie darauf, die Schläuche nicht zu beschädigen.
www.aeg.com 7. 8. Entfernen Sie den Styroporschutz von der Geräteunterseite. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 1 2 9. Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen. 10. Lösen Sie die drei Schrauben. Ver- wenden Sie dazu den mitgelieferten Schraubenschlüssel. 11. Ziehen Sie die Kunststoff-Abstandshalter heraus. 12. Setzen Sie die Kunststoffkappen in die Öffnungen. Diese Kappen finden Sie im Beutel mit der Gebrauchsanleitung.
DEUTSCH WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. 35 Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren. 12.3 Aufstellen und Ausrichten x4 • Stellen Sie das Gerät auf einen ebenen, festen Boden. • Stellen Sie sicher, dass die Luftzirkulation unter dem Gerät nicht durch Teppiche beeinträchtigt wird. • Vergewissern Sie sich, dass die Maschine weder die Wand noch andere Geräte berührt.
www.aeg.com 12.4 Wasserzulaufschlauch • Schließen Sie den Schlauch am Gerät an. Drehen Sie den Wasserzulaufschlauch nur nach links oder rechts. Lösen Sie die Ringmutter, um ihn in die gewünschte Position zu bewegen. 20 O 45 O • Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"-Außengewinde an. VORSICHT! Achten Sie darauf, dass die Anschlüsse dicht sind. Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist.
DEUTSCH 37 12.5 Wasserablauf Es gibt mehrere Möglichkeiten, den Ablaufschlauch anzuschließen: Mit der Kunststoff-Schlauchführung. • Über eine Waschbeckenkante. • Stellen Sie sicher, dass die KunststoffFührung beim Abpumpen nicht abrutschen kann. Befestigen Sie deswegen die Führung am Wasserhahn oder an der Wand. • An ein Standrohr mit Entlüftungsöffnung. Orientieren Sie sich an der Abbildung. Direkte Einleitung in ein Ablaufrohr auf einer Höhe nicht unter 60 cm und nicht über 100 cm.
www.aeg.com • Direkte Einleitung in ein Abflussrohr in der Zimmerwand. Mit einer Schlauchschelle befestigen. Sie können den Ablaufschlauch auf maximal 400 cm verlängern. Fragen Sie beim Kundendienst nach einem anderen Ablaufschlauch und der Schlauchverlängerung. 13. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte.
DEUTSCH 39
132941844-A-192012 www.aeg.