L 98499 FL L 98699 FL WASCHMASCHINE BENUTZERINFORMATION
INHALT 4 6 7 7 8 13 18 18 18 19 20 22 23 23 25 29 33 34 SICHERHEITSHINWEISE UMWELTTIPPS GERÄTEBESCHREIBUNG ZUBEHÖR BEDIENFELD WASCHPROGRAMME VOR DER ERSTEN INBETRIEBNAHME GEBRAUCH DES GERÄTS EINSCHALTEN DES GERÄTS UND EINSTELLEN EINES PROGRAMMS EINFÜLLEN DER WÄSCHE VERWENDEN VON WASCH- UND PFLEGEMITTELN STARTEN EINES PROGRAMMS AM PROGRAMMENDE PRAKTISCHE TIPPS UND HINWEISE REINIGUNG UND PFLEGE FEHLERSUCHE UND KUNDENDIENST TECHNISCHE DATEN MONTAGE KUNDENDIENST Halten Sie folgende Angaben bereit, wenn Sie
DEUTSCH 3 FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage oder Verwendung Schäden verursacht.
DEUTSCH REINIGUNG UND PFLEGE • Schalten Sie das Gerät ab und ziehen Sie den Netzstecker aus der Steckdose. • Benutzen Sie das Gerät nie ohne die Filter. Vergewissern Sie sich, dass die Filter ordnungsgemäß eingesetzt sind. Ein falsch eingesetzter Filter führt zu Wasserlecks. INNENBELEUCHTUNG Die Innenbeleuchtung des Geräts wird automatisch beim Öffnen der Tür eingeschaltet und beim Schließen der Tür ausgeschaltet. WARNUNG! Vermeiden Sie es, direkt in das Licht der Lampe zu schauen.
• Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät vom Stromnetz trennen möchten. Ziehen Sie dazu immer direkt am Netzstecker. 2. Schneiden Sie das Netzkabel ab und entsorgen Sie es. 3.
DEUTSCH 7 GERÄTEBESCHREIBUNG 1 2 3 9 10 11 4 5 6 12 7 13 8 1 Arbeitsplatte 2 Waschmittelschublade 8 Schraubfüße zum Ausrichten des Geräts 9 Wasserablaufschlauch 10 Wasserzulaufschlauch 3 Bedienfeld 4 Türgriff 11 Netzkabel 12 Transportschrauben 5 Innenbeleuchtung 6 Typenschild 13 Schraubfüße zum Ausrichten des Geräts 7 Ablaufpumpe ZUBEHÖR 1 5 2 4 3 1 Schraubenschlüssel Zum Lösen der Transportschrauben.
BEDIENFELD 1 2 3 Glätten Koch/Bunt Auffrischen Extra Leise Energiesparen Super Eco Pflegeleicht 20Min. - 3kg Feinwäsche Dampf Memory 1 Leichtbügeln Outdoor Spülen Schleudern/ Pumpen Gewichtssensor Memory 2 Wolle/Seide Daunen Auto Off Anti-Allergie Temp. 12 U/Min. Flecken/ Vorw.
DEUTSCH 9 DISPLAY 3 A J I A B H G C F D E Die Textzeile: • Hilft Ihnen bei der Benutzung des Geräts. • Informiert Sie über den Programmstatus und die Programmphase. • Zeigt Fehlermeldungen an. Siehe „Fehlersuche und Kundendienst“. Die Symbole erscheinen im Display, wenn die zugehörige Programmphase oder Funktion eingestellt ist. B Kindersicherung C Tür verriegelt Sie können die Tür nicht öffnen, solange dieses Symbol erscheint. Sie können die Tür erst öffnen, wenn das Symbol erlischt.
Programmende-Symbol Das Symbol erscheint, sobald die Ziffern die Endzeit des Programms anzeigen. • Die Zeitvorwahl – Wenn Sie die Zeitvorwahl einstellen, verschiebt sich die Endzeit des Programms in 30-Minuten-Schritten um bis zu 10 Stunden nach hinten, anschließend in Schritten von 1 Stunde um bis zu 20 Stunden. • Das Programmende Das Display zeigt eine Null an. Dieser Teil ist nur aktiv, wenn die Tür geöffnet ist - Siehe „Einfüllen der Wäsche“.
DEUTSCH 11 Der Anzeigebalken füllt sich entsprechend der eingestellten Funktionen. Die Standard-Schleuderdrehzahl des Programms. I ___ Ohne Schleudern 1) Spülstopp 1) Nur verfügbar für das Programm Schleudern/Pumpen . Die Standard-Temperatur des Programms. J Kaltwäsche DAMPF -TASTE 4 Berühren Sie 4 zur Einstellung der Dampfmenge. Diese Option ist nur bei Programmen mit vorhandener Dampffunktion möglich. Die Dauer der Dampfphase ändert sich entsprechend Ihrer Einstellung.
FLECKEN, VORWÄSCHE UND EINWEICHEN -TASTE 10 Berühren Sie 10 , um eine dieser Funktionen einzustellen: Stellen Sie diese Funktion ein, um Knitterfalten zu vermeiden. Das Gerät pumpt das Wasser am Ende des Programms nicht ab. TEMPERATUR-TASTE 12 FLECKEN Verwenden Sie diese Funktion für Wäsche mit schwer zu entfernenden Flecken. Bei Wahl dieser Funktion geben Sie . den Fleckentferner in das Fach Die Programmdauer verlängert sich entsprechend.
DEUTSCH FUNKTION „IMMER EXTRA SPÜLEN“ Mit dieser Funktion können Sie die Funktion „Extra Spülen“ stets beibehalten, auch wenn Sie ein neues Programm einstellen. • Berühren Sie zum Aktivieren der Funktion die Tasten 8 und 7 13 gleichzeitig so lange, bis im Display erscheint. das Symbol • Berühren Sie zum Deaktivieren der Funktion die Tasten 8 und 7 gleichzeitig so lange, bis das Symbol im Display erlischt.
Programm Temperatur Wäschetyp Wäschegewicht Programmbe- Funktionen schreibung Leichtbügeln 60 °C - Kalt Synthetikfasern, normal verschmutzt. Verhindert die Knitterbildung. Max. Beladung 1,5 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP VORWÄSCHE2) EINWEICHEN EXTRA SPÜLEN ZEIT SPAREN3) Feinwäsche 40 °C - Kalt Spülgänge Kurzer Schleudergang Feinwäsche, z.B. aus Acryl, Viskose oder Polyester, normal verschmutzt. Max.
DEUTSCH 15 Programm Temperatur Wäschetyp Wäschegewicht Programmbe- Funktionen schreibung Anti-Allergie 60° Weiße Baumwolle4). Max. Beladung 9 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP FLECKEN VORWÄSCHE2) EINWEICHEN EXTRA SPÜLEN Schleudern / Pumpen5) 0° Alle Gewebe Die maximale Beladung hängt vom Wäschetyp ab. Abpumpen des Wassers Schleudergang mit max. Drehzahl DREHZAHLREDUZIERUNG OHNE SCHLEUDERN6) Spülen 0° Alle Gewebe Max.
Programm Temperatur Wäschetyp Wäschegewicht Programmbe- Funktionen schreibung Energiesparen 60° oder 40° Weiße und farbechte Baumwolle, normal verschmutzt9). Max. Beladung 9 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP FLECKEN VORWÄSCHE2) EINWEICHEN EXTRA SPÜLEN ZEIT SPAREN3) 1) Bei Temperaturen unter 40 °C nicht verfügbar. 2) Wenn Sie Flüssigwaschmittel benutzen, wählen Sie ein Programm ohne VORWÄSCHE.
DEUTSCH 17 Dampf kann für getrocknete, gewaschene oder einmal getragene Wäsche benutzt werden. Diese Programme können Falten und Gerüche reduzieren und machen Ihre Wäsche glatter. Verwenden Sie kein Waschmittel. Entfernen Sie Flecken bei Bedarf durch Waschen oder einen an der entsprechenden Stelle angewandten Fleckentferner. Dampfprogramme sind keine Hygieneprogramme. Berühren Sie die Taste 4 , um die Dauer der Dampfphase zu ändern.
VOR DER ERSTEN INBETRIEBNAHME 1. Zum Aktivieren des Ablaufsystems füllen Sie 2 Liter Wasser in das Hauptfach der Waschmittelschublade. 2. Geben Sie eine kleine Waschmittelmenge in das Hauptfach der Waschmittelschublade. Stellen Sie ein Koch/Buntwäsche-Programm mit der höchsten Temperatur ein und starten Sie das Programm mit leerer Trommel. So werden alle eventuellen Verunreinigungen aus Trommel und Bottich entfernt.
DEUTSCH 1. Drücken Sie die Taste 1 , um das Gerät einzuschalten. 2. Drehen Sie den Programmwahlschalter 2 auf das gewünschte Programm, oder berühren Sie zum Einstellen eines gespeicherten Programms eine der Tasten 5 . Die Programmkontrolllampe leuchtet auf. 3. Die Kontrolllampe der Taste 6 blinkt rot. 4. Im Display werden die Standardwerte für Temperatur und Schleuder- 19 drehzahl angezeigt. Berühren Sie, falls notwendig, die Tasten 12 und 11 , um die Wassertemperatur und Schleuderdrehzahl zu ändern. 5.
Achten Sie darauf, dass keine Wäsche aus der Trommel hängt, die zwischen Dichtung und Tür eingeklemmt werden könnte. Dies könnte zu Wasserlecks oder Beschädigungen der Wäsche führen. VERWENDEN VON WASCH- UND PFLEGEMITTELN Waschmittelfach für die Vorwaschphase und das Einweichprogramm. Füllen Sie das Waschmittel für den Vorwaschgang und das Einweichen vor dem Start des Programms ein. Waschmittelfach für die Waschphase.
DEUTSCH 21 Überprüfen Sie die Position der Klappe 1. Ziehen Sie die Waschmittelschublade bis zum Anschlag heraus. 2. Drücken Sie den Hebel nach unten und ziehen Sie die Schublade heraus. 3. Drehen Sie die Klappe nach oben, wenn Sie Waschpulver verwenden. 4. Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Klappe in der Position „Unten“: – Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz.
EINSTELLEN DER ZEITVORWAHL 1. Berühren Sie zur Einstellung der gewünschten Zeitvorwahl wiederholt die Taste 7 . Das Display zeigt das voraussichtliche Ende des Programms an. 2. Nach dem Berühren der Taste 6 beginnt das Gerät die vorgewählte Zeit herunterzuzählen. Nach Ablauf der Zeitvorwahl startet das Programm automatisch. Sie können die Einstellung der Zeitvorwahl vor dem Einschalten des Geräts mit der Taste 6 jederzeit abbrechen oder ändern.
DEUTSCH Wenn die Temperatur und der Wasserstand zu hoch sind, leuchtet das Türverriegelungssymbol weiterhin. Die Tür lässt sich nicht öffnen. Wenn Sie dennoch die Tür öffnen möchten, gehen Sie folgendermaßen vor: 1. Schalten Sie das Gerät aus. 2. Warten Sie einige Minuten. 3. Vergewissern Sie sich, dass kein Wasser in der Trommel steht. 23 Wenn Sie das Gerät ausschalten, müssen Sie das Programm anschließend neu einstellen. AM PROGRAMMENDE 1. Das Gerät stoppt automatisch. 2.
• Manche farbigen Textilien können beim ersten Waschen färben. Wir empfehlen, sie deshalb die ersten Male separat zu waschen. • Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Schließen Sie Gürtel. • Leeren Sie die Taschen und falten Sie die Wäscheteile auseinander. • Wenden Sie mehrlagige Textilien, Wolle und bedruckte Wäschestücke vor dem Waschen. • Entfernen Sie hartnäckige Flecken. • Waschen Sie stark verschmutzte Bereiche mit einem speziellen Waschmittel.
DEUTSCH 25 Wasserhärtetabelle Härtegrad Art Wasserhärte °dH °TH mmol/l Clarke 1 weich 0-7 0-15 0-1.5 0-9 2 mittel 8-14 16-25 1.6-2.5 10-16 3 hart 15-21 26-37 2.6-3.7 17-25 4 sehr hart > 21 > 37 >3.7 >25 REINIGUNG UND PFLEGE WARNUNG! Trennen Sie das Gerät von der Stromversorgung, bevor Sie es reinigen. ENTKALKEN Normales Leitungswasser enthält Kalk. Falls erforderlich, benutzen Sie einen Enthärter, um Kalkablagerungen zu entfernen.
TROMMEL Überprüfen Sie regelmäßig, dass sich kein Kalk und keine Rostpartikel in der Trommel absetzen. Verwenden Sie zur Entfernung von Rost aus der Trommel nur Spezialprodukte. Vorgehensweise: • Reinigen Sie die Trommel mit einem Spezialreiniger für Edelstahl. • Starten Sie ein kurzes Programm für Koch-/Buntwäsche mit der maximalen Temperatur und einer kleinen Menge Waschmittel. WASCHMITTELSCHUBLADE So reinigen Sie die Waschmittelschublade: 1 1. Drücken Sie auf den Hebel. 2.
DEUTSCH 27 WARNUNG! 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Entfernen Sie den Filter nicht, während das Gerät in Betrieb ist. Reinigen Sie die Ablaufpumpe nicht, wenn das Wasser im Gerät heiß ist. Das Wasser muss abgekühlt sein, bevor Sie die Ablaufpumpe reinigen. So reinigen Sie die Ablaufpumpe: 1. Öffnen Sie die Ablaufpumpenklappe. 2. Ziehen Sie die Klappe zum Entfernen heraus. 3. Stellen Sie einen Behälter unter die Ablaufpumpe, um das auslaufende Wasser aufzufangen.
2 1 ZULAUFSCHLAUCHFILTER UND VENTILFILTER Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein. 7. Entfernen Sie Flusen und Gegenstände aus der Pumpe. 8. Vergewissern Sie sich, dass sich das Flügelrad der Pumpe drehen kann. Wenn dies nicht möglich ist, wenden Sie sich an den Kundendienst. 9.
DEUTSCH 4. 5. 6. 35° 45° NOTENTLEERUNG Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (6) unter „So reinigen Sie die Ablaufpumpe“ durch. Reinigen Sie bei Bedarf die Pumpe. Bringen Sie den Ablaufkanal wieder in seine ursprüngliche Position und schließen Sie die Ablaufpumpenklappe. Wenn Sie das Wasser über das Notentleerungsverfahren abpumpen, müssen Sie das Abpumpsystem wieder aktivieren: 1.
WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. Problem Mögliche Ursache Mögliche Abhilfe Im Display erscheint die Aufforderung, den Wasserhahn zu überprüfen: Das Gerät füllt sich nicht mit Wasser. Der Wasserhahn ist geschlossen. Drehen Sie den Wasserhahn auf. Der Wasserzulaufschlauch ist beschädigt. Vergewissern Sie sich, dass der Wasserzulaufschlauch nicht beschädigt ist. Die Filter im Wasserzulaufschlauch sind zugesetzt. Reinigen Sie die Filter.
DEUTSCH 31 Problem Mögliche Ursache Das Display meldet einen Wasseralarm. Die Aquasafe-Einrichtung • Schalten Sie das Gerät aus. wurde ausgelöst. • Schließen Sie den Wasserhahn. • Wenden Sie sich hierzu an den Kundendienst. Mögliche Abhilfe PROBLEME OHNE FEHLERMELDUNGEN Problem Mögliche Ursache Das Gerät pumpt das Wasser nicht ab. Ein Waschprogramm oh- Stellen Sie das Abpumpprone Abpumpphase ist ein- gramm ein. gestellt. Das Gerät schleudert nicht.
Problem Mögliche Ursache Mögliche Abhilfe Die Tür des Geräts lässt sich nicht öffnen. Ein Waschprogramm läuft. Warten Sie das Ende des Waschprogramms ab. Es befindet sich Wasser in der Trommel. Stellen Sie das Abpump- oder Schleuderprogramm ein. Das Gerät ist nicht ausgerichtet. Richten Sie das Gerät waagrecht aus. Siehe hierzu „Montage“. Sie haben die Verpackungsmaterialien und/ oder die Transportschrauben nicht entfernt.
DEUTSCH 33 Problem Mögliche Ursache Mögliche Abhilfe Die Trommel ist leer und im Display wird angezeigt, dass sich Wäsche darin befindet. Das Leergewicht muss eingestellt werden. Drücken Sie die Taste 1 , um das Gerät aus- und wieder einzuschalten. Die Trommel ist voll, im Display wird jedoch 0,0 kg angezeigt. Sie haben die Wäsche eingefüllt, bevor das Gerät eingeschaltet wurde. Drücken Sie die Taste 1 , um das Gerät auszuschalten. Leeren Sie die Trommel und befolgen Sie die notwendigen Schritte.
Maximale Beladung Koch-/Buntwäsche Schleuderdrehzahl Max. 9 kg 1400 U/min (L98499FL) 1600 U/min (L98699FL) 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. MONTAGE AUSPACKEN 1. Verwenden Sie Handschuhe. Entfernen Sie die äußere Folie. Benutzen Sie, falls erforderlich, ein Teppichmesser. 2. 3. 4. Nehmen Sie die Karton-Abdeckung ab. Entfernen Sie die Styropor-Verpackungsteile. Entfernen Sie die innere Folie.
DEUTSCH 35 5. Öffnen Sie die Tür. Entfernen Sie das Styroporteil aus der Türdichtung und alle Teile aus der Trommel. 6. Legen Sie das vordere Styroporteil hinter dem Gerät auf den Boden. Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. Achten Sie darauf, nicht die Schläuche zu beschädigen. 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. 8. Reinigen Sie die Unterseite des Geräts und trocknen Sie sie ab. Verwenden Sie keinen Alkohol, keine Lösungsmittel und keine Chemikalien.
9. A Sortieren Sie die verschiedenen Teile des Schallschutzes nach Größe und Position. Orientieren Sie sich an der Abbildung. A (FRONT) = Vorderseite des Geräts B (BACK) = Rückseite des Geräts B x4 A 10. – Entfernen Sie den Klebestreifen von den Schallschutzteilen. – Bringen Sie die vier Schallschutzteile auf der Geräteunterseite an. Orientieren Sie sich an der Abbildung. – Vergewissern Sie sich, dass die Schallschutzteile fest angebracht sind.
DEUTSCH 37 13. Lockern Sie die drei Schrauben mit dem mitgelieferten Schlüssel. Ziehen Sie die Kunststoff-Abstandshalter heraus. 14. Ersetzen Sie die Kunststoff-Abstandshalter durch die Kunststoffkappen. Diese Kappen finden Sie im Beutel mit der Gebrauchsanweisung. WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren.
AUFSTELLEN UND AUSRICHTEN • Stellen Sie das Gerät auf einen ebenen, festen Boden. • Stellen Sie sicher, dass die Luftzirkulation unter dem Gerät nicht durch Teppiche beeinträchtigt wird. • Vergewissern Sie sich, dass die Maschine weder die Wand noch andere Geräte berührt. • Schrauben Sie die Füße zum Ausrichten des Geräts weiter heraus oder hinein. Durch eine korrekte waagrechte Ausrichtung des Geräts werden Vibrationen, Geräusche und ein „Wandern“ des Geräts während des Betriebs vermieden.
DEUTSCH 39 • Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"-Außengewinde an. VORSICHT! Achten Sie darauf, dass die Anschlüsse dicht sind. Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist. Wenden Sie sich an den Kundendienst, um einen anderen Zulaufschlauch zu erhalten. Aquastopp-Einrichtung A WASSERABLAUF Es gibt mehrere Möglichkeiten, den Ablaufschlauch anzuschließen: Mit der Kunststoff-Schlauchführung.
• Über eine Waschbeckenkante. • Stellen Sie sicher, dass die Kunststoff-Führung beim Abpumpen nicht abrutschen kann. Befestigen Sie deswegen die Führung am Wasserhahn oder an der Wand. • An ein Standrohr mit Entlüftungsöffnung. Orientieren Sie sich an der Abbildung. Direkte Einleitung in ein Ablaufrohr auf einer Höhe nicht unter 60 cm und nicht über 100 cm. Das Ende des Ablaufschlauchs muss immer belüftet sein, d.h.
DEUTSCH 41
DEUTSCH 43
www.aeg.