User manual

Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
Using a spanner,
unscrew and
remove the 2 rear
bottom screws.
Slide out the 2
plastic pins. Lay
the machine on
its back, taking
care not to
squash the hoses.
This can be avoided by placing one of the
corner packing pieces between the machine
and the floor.
Remove the polystyrene block from the
bottom of the machine and release the two
plastic bags.
Carefully slide out the left-hand bag
removing it
towards the right
and then down-
wards.
Slide out the
right-hand bag
removing it
towards the left
and then upwards.
Set the machine
upright and
remove the
remaining rear
screw. Slide out
the relevant pin.
Plug the open holes
with the plugs
which you will find in the plastic bag containing the instruction booklet.
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.
49
P1129
P1124
2
3
1
P1126
P1127
P0001
P1128
P0002
132995620.qxd 2/12/03 3:35 PM Pagina 49 (Nero/Process Black pellicola)