User manual

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs etc.

• Before placing it on small tiles, apply a

rubber coating.

• Never try to correct any unevenness in the

floor by putting pieces of wood, card-

board or similar materials under the machine.

• If it is impossible to avoid positioning the machine next to a gas

cooker or coal-burning stove, an insulating panel (85x57 cm) covered

with aluminium foil on the side facing the cooker or stove, must be

inserted between the two appliances;

• The machine must not be installed in rooms where the temperature

can drop below 0°C.

• The water inlet hose and the drain hose must not be kinked.

• Please ensure that when the appliance is installed, it is easily accessi-

ble for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the adjustable feet in or out. Never place

cardboard, wood or similar materials under the machine to compen-

sate for any unevenness in the floor.

Installation on a suspended floor

Suspended wooden floors are particularly

susceptible to vibration. To help prevent

vibration we recommend you place a

waterproof wood panel, at least 15 mm

thick under the appliance, secured to at

least 2 floor beams with screws. If possible

install the appliance in one of the corners

of the room, where the floor is more sta-

ble.

Installation

P0002

132995620.qxd 2/12/03 3:35 PM Pagina 50 (Nero/Process Black pellicola)