User manual
96
Installation
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by
carpets, rugs etc.
• Before placing it on small tiles, apply a rubber coating.
• Never try to correct any unevenness in the floor by putting pieces of
wood, cardboard or similar materials under the machine.
• If it is impossible to avoid positioning the machine next to a gas
cooker or coal-burning stove, an insulating panel (85x57 cm) covered
with aluminium foil on the side facing the cooker or stove, must be
inserted between the two appliances;
• The machine must not be installed in rooms where the temperature
can drop below 0.
• The water inlet hose and the drain hose must not be kinked.
• Please ensure that when the appliance is installed, it is easily accessi-
ble for the engineer in the event of a breakdown.
Levelling
Carefully level by screwing the adjustable
feet in or out. Never place cardboard,
wood or similar materials under the
machine to compensate for any uneven-
ness in the floor.
Water inlet
Connect the water
inlet hose to a sep-
arate tap with a
3/4" thread.
The other end of
the inlet hose
which connects to
the machine can be
turned in any direc-
tion. Simply loosen the fitting, rotate the hose and retighten the fitting,
making sure there are no water leaks.
132995660•GB.qxd 06/02/03 09:45 Pagina 96 (Nero/Process Black pellicola)