User manual

6. CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand-
ards. Different causes can change the data: the quantity and type of
laundry and ambient temperature. Water pressure, the supply voltage
and the temperature of inlet water may also affect the washing pro-
gramme duration.
Technical specifications may be changed without prior notice to improve
the quality of product.
At the start of the programme, the display shows the programme dura-
tion for the maximum load capacity.
During the washing phase the programme duration is automatically cal-
culated and can be greatly reduced if the laundry load is lower than the
maximum load capacity (e.g. Cotton 60°C, maximum load capacity 8 kg,
the programme duration exceeds 2 hours; actual load 1 kg, the pro-
gramme duration will be less than 1 hour).
When the appliance is calculating the real programme duration a dot
flashes in the display.
Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption (li-
tre)
Approximate pro-
gramme duration
(minutes)
Cottons 60°C 8 1.35 67 175
Baumwolle Eco
Cotton Energy Saving Pro-
gramme 60°C
1)
8 1.07 63 241
Cottons 40°C 8 0.85 67 170
Synthetics 40°C 3.5 0.40 48 115
Delicates 40°C 3.5 0.50 55 80
Wool/Handwash 30°C 1.5 0.25 45 60
1)
«Cotton Energy Saving programme » at 60°C with a load of 8kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.
7. OPTIONS
7.1 Temp.
Set this option to change the default
temperature.
Indicator = cold water.
The display shows the set temperature.
7.2 U./Min.
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
ENGLISH 15