User Manual

16
Washing cycle complete/Removing the washing
When the programme has finished, END will illuminate in the
programme progress display. As soon as the DOOR indicator goes out
and the END indicator illuminates, the door can be opened.
1. Open the door and remove the washing.
2. Turn the programme selector to OFF.
3. Turn off the tap.
4. After washing, pull out the detergent drawer a little to allow it to dry.
Keep the door very slightly open so that the washing machine can air.
If RINSE HOLD has been selected:
Following a rinse hold DOOR and END will illuminate in the programme
progress display.
First the water must be drained:
– Either turn the programme selector to OFF, then to DRAIN and press
the START/PAUSE button (the water will be drained without
spinning),
– or turn the programme selector to OFF and then to SPIN. Depending
on the type of washing, if required, reduce the spin speed and press
the START/PAUSE button (the water will be drained and the washing
spun).