LAVAMAT 5260FL LAVAMAT 5468FL LAVAMAT 5460FL DE WASCHMASCHINE BENUTZERINFORMATION
FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
Inhalt INHALT 4 5 7 8 9 10 13 15 19 24 28 28 29 35 35 Sicherheitsinformationen Sicherheitshinweise Gerätebeschreibung Bedienfeld Erste Inbetriebnahme Täglicher Gebrauch Praktische Tipps und Hinweise Waschprogramme Reinigung und Pflege Was tun, wenn … Technische Daten Verbrauchswerte Montage Elektrischer Anschluss Umwelttipps In dieser Benutzerinformation werden folgende Symbole verwendet: Wichtige Hinweise zur Sicherheit von Personen und Informationen zur Vermeidung von Geräteschäden Allgemeine Hinweise
Sicherheitsinformationen SICHERHEITSINFORMATIONEN Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. Sicherheit von Kindern und schutzbedürftigen Personen WARNUNG! Es besteht Erstickungsgefahr. Risiko von Verletzungen oder permanenten Behinderungen.
Sicherheitshinweise 5 • Die Lüftungsöffnungen im Gerätesockel (falls vorhanden) dürfen nicht von einem Teppichboden blockiert werden. • Das Gerät muss mit den mitgelieferten neuen Schläuchen an den Wasseranschluss angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden. SICHERHEITSHINWEISE Montage • Entfernen Sie die Verpackungsmaterialien und die Transportschrauben. • Bewahren Sie die Transportschrauben auf. Wenn Sie das Gerät umsetzen, müssen Sie die Trommel blockieren.
Sicherheitshinweise • Ziehen Sie nicht am Netzkabel, um das Gerät von der Spannungsversorgung zu trennen. Ziehen Sie dazu immer direkt am Netzstecker. • Fassen Sie das Netzkabel oder den Netzstecker nicht mit nassen Händen an. • Das Gerät entspricht den EC-Richtlinien. Wasseranschluss • Achten Sie darauf, die Wasserschläuche nicht zu beschädigen. • Das Gerät muss mit den mitgelieferten neuen Schläuchen an den Wasseranschluss angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden.
Gerätebeschreibung 7 • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in dem Gerät einschließen. Service • Wenden Sie sich zur Reparatur des Geräts an den Kundendienst. Wir empfehlen nur Originalersatzteile zu verwenden. GERÄTEBESCHREIBUNG Ihr neues Gerät erfüllt alle Anforderungen moderner Wäschepflege, mit großen Einsparungen von Wasser, Waschmittel und Energie.
Bedienfeld Waschmittelschublade Fach für Waschmittel oder Fleckentferner. Das Vorwaschmittel wird zu Beginn des Waschprogramms eingespült. Der Fleckentferner wird während der FLECKENBehandlungsphase im Hauptwaschgang zugefügt. Fach für Waschpulver oder Flüssigwaschmittel für den Hauptwaschgang. Fach für flüssige Pflegemittel (Weichspüler, Stärke). Befolgen Sie die Mengenempfehlungen des Waschmittelherstellers und überschreiten Sie nicht die Markierung "MAX" in der Waschmittelschublade.
Erste Inbetriebnahme 1 1 2 3 4 5 6 2 3 4 5 9 6 Programmwahlschalter Taste SCHLEUDERN (U/MIN.) Taste FLECKEN Taste KURZ Taste START/PAUSE Kontrolllampen Kontrolllampen Nach Drücken von Taste 5 leuchtet die Kontroll6.1 lampe WASCHEN (6.1) auf. Das Gerät ist in Betrieb und die Tür kann nicht geöffnet werden. 6.2 Nach dem Programmende leuchtet die Kontrolllampe ENDE (6.2) auf und nach einigen Minuten 6.3 kann die Tür geöffnet werden.
Täglicher Gebrauch TÄGLICHER GEBRAUCH Einlegen der Wäsche 1. 2. Öffnen Sie die Tür, indem Sie den Türgriff behutsam nach außen ziehen. Legen Sie die Wäsche Stück für Stück lose in die Trommel. Drücken Sie die Tür fest zu. Das Schloss muss hörbar einrasten. WARNUNG! Achten Sie darauf, dass die Wäsche nicht zwischen Tür und Gummidichtung eingeklemmt wird. Messen Sie Waschmittel und Pflegemittel ab Ihr neues Gerät wurde speziell für die Einsparung von Wasser, Energie und Waschmittel konstruiert. 1.
Täglicher Gebrauch 11 Wählen Sie das gewünschte Programm mit dem Programmwahlschalter (1). Sie können das richtige Programm für jede Art von Wäsche anhand der Beschreibungen in den Waschprogrammtabellen auswählen (siehe "Waschprogramme"). Drehen Sie den Programm-Wahlschalter auf das gewünschte Programm. Mit dem Programm-Wahlschalter legen Sie je nach Wäschetyp das geeignete Waschprogramm (z. B. Wasserstand, Trommelbewegung, Anzahl der Spülgänge) und die Temperatur beim Waschen fest.
Täglicher Gebrauch VORSICHT! Wenn Sie ein Programm mit Flecken-Funktion ausführen möchten, schütten Sie das Wasch. mittel oder den Fleckentferner in das Fach Wählen Sie die Option KURZ (Taste 4) Durch Drücken dieser Taste leuchtet die entsprechende Kontrolllampe auf und die Waschdauer reduziert sich. Diese Option eignet sich bei leicht verschmutzter Wäsche, die nur kurze Zeit verwendet bzw. getragen wurde.
Bleibt die Tür verriegelt, bedeutet dies, dass die Maschine bereits aufheizt, und dass der Wasserstand bereits über den Türrand reicht. In diesem Fall lässt sich die Tür nicht öffnen. Wenn Sie die Tür unbedingt öffnen müssen und merken, dass sie verriegelt ist, schalten Sie drehen. Nach einigen Minuten das Gerät aus, indem Sie den Programmwahlschalter auf kann die Tür geöffnet werden.
Praktische Tipps und Hinweise Reinigen Sie besonders verschmutzte Stellen mit einem speziellen Waschmittel oder Waschmittelpaste vor. Behandeln Sie Gardinen besonders sorgsam. Entfernen Sie Haken oder stecken Sie diese Wäschestücke in eine Tasche oder ein Wäschenetz. Entfernen von Flecken Hartnäckige Flecken lassen sich möglicherweise nicht allein mit Wasser und Waschmittel entfernen. Sie sollten daher vor dem Waschen vorbehandelt werden. Blut: Behandeln Sie frische Flecken mit kaltem Wasser.
Waschprogramme 15 • Waschpulver für Schonwäsche (höchstens 60 °C) und Wolle • Flüssigwaschmittel, vorzugsweise für Programme mit niedrigen Temperaturen (max. 60 °C) für alle Gewebearten oder nur speziell für Wolle. Waschmittel und Pflegemittel müssen vor dem Start des Waschprogramms in die entsprechenden Fächer der Waschmittelschublade eingefüllt werden. Bei der Verwendung von Waschmittelkonzentraten oder Flüssigwaschmitteln muss ein Programm ohne Vorwäsche ausgewählt werden.
Waschprogramme Programm Höchst- und Mindesttemperatur Programmbeschreibung Max. Schleuderdrehzahl Max. Wäschemenge Wäscheart Optionen KOCHWÄSCHE/BUNTWÄSCHE MIT VORWÄSCHE 60°-40° Vorwäsche - Hauptwäsche - Spülgänge - langer Schleudergang Maximale Schleuderdrehzahl 1200 U/min für Modell L5260FL (1400 U/min für Modell L5468FL-L5460FL) Max. Beladung 6 kg - Ver. Beladung 3 kg Für weiße und bunte Baumwolle mit Vorwaschgang (stark verschmutzte Wäschestücke). U/MIN.
Waschprogramme Programm Höchst- und Mindesttemperatur Programmbeschreibung Max. Schleuderdrehzahl Max. Wäschemenge Wäscheart Optionen WOLLE PLUS (HANDWÄSCHE) 30 °C - Kalt Hauptwaschgang - Spülgänge - Kurzer Schleudergang Maximale Schleuderdrehzahl 1200 U/min für Modell L5260FL (1000 U/min für Modell L5468FL-L5460FL) Max. Beladung 2 kg Ein Waschprogramm sowohl für maschinenwaschbare Wolle als auch für handwaschbare Wäschestücke aus Wolle und Feinwäsche.
Waschprogramme Programm Höchst- und Mindesttemperatur Programmbeschreibung Max. Schleuderdrehzahl Max. Wäschemenge Wäscheart Optionen SCHLEUDERN Abpumpen und langer Schleudergang Maximale Schleuderdrehzahl 1200 U/min für Modell L5260FL (1400 U/min für Modell L5468FL-L5460FL) Max. Beladung 6 kg Separater Schleudergang für handgewaschene Kleidungsstücke und nach Programmen mit der Option Spülstopp. Vor der Wahl dieses Programms muss der gedreht werden.
Reinigung und Pflege 19 Diese Programme sind gemäß Verordnung 1061/2010 die Standardprogramme „Baumwolle 60 °C“ bzw. „Baumwolle 40 °C“. Hinsichtlich des kombinierten Energie- und Wasserverbrauchs für das Waschen normal verschmutzter Baumwollwäsche sind dies die effizientesten Programme. Die Wassertemperatur in der Waschphase kann von der für das ausgewählte Programm angegebenen Temperatur abweichen. REINIGUNG UND PFLEGE Vor Reinigungs- und Wartungsarbeiten immer das Gerät vom Stromnetz trennen.
Reinigung und Pflege 2. 3. 4. 5. 6. Entfernen Sie den Einsatz für Zusatzmittel aus dem mittleren Fach. Alle Teile mit Wasser reinigen. Den Einsatz für Zusatzmittel bis zum Anschlag aufstecken, so dass er fest sitzt. Reinigen Sie den gesamten Einspülbereich der Waschmaschine, insbesondere die Düsen oben in der Waschmittelkammer mit einer Bürste. Setzen Sie die Waschmittelschublade in die Führungsschienen ein und schieben Sie sie ins Gerät.
Reinigung und Pflege 21 • Das Gerät nicht abpumpt und/oder schleudert. • Das Gerät beim Abpumpen ungewöhnliche Geräusche macht, weil Sicherheitsnadeln, Münzen o. ä. die Pumpe blockieren. • Eine Störung beim Wasserablauf besteht (siehe Abschnitt „Was tun, wenn...“). WARNUNG! Schalten Sie vor dem Öffnen der Pumpenklappe immer das Gerät ab und ziehen Sie den Netzstecker aus der Steckdose. Gehen Sie hierzu folgendermaßen vor: 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2.
Reinigung und Pflege 8. Entfernen Sie alle Fremdkörper und Flusen aus der Filteraufnahme und dem Pumpenflügelrad. 9. Prüfen Sie, ob sich das Pumpenflügelrad drehen lässt (es dreht sich ruckartig). Lässt es sich nicht drehen, wenden Sie sich bitte an Ihren Kundendienst. 10. Verschließen Sie den Notentleerungsschlauch und schieben Sie den Schlauch wieder in das Gerät. 11. Setzen Sie den Filter wieder in die Pumpe ein. Setzten Sie ihn richtig in die speziellen Führungen ein.
Reinigung und Pflege 1. 2. 3. 4. 5. 6. 7. 8. Schließen Sie den Wasserhahn. Schrauben Sie den Schlauch vom Hahn ab. Reinigen Sie den Filter im Schlauch mit einer harten Bürste. Schrauben Sie den Schlauch wieder an den Hahn an. Vergewissern Sie sich, dass der Anschluss in Ordnung ist. Schrauben Sie den Schlauch vom Gerät ab. Halten Sie ein Tuch bereit, da möglicherweise etwas Wasser herausfließt. Reinigen Sie den Filter im Ventil mit einer harten Bürste oder einem Lappen.
Was tun, wenn … 5. 6. 7. 8. Stellen Sie einen Behälter auf den Fußboden und halten Sie das Ende des Notentleerungsschlauchs in den Behälter. Entfernen Sie den Verschlussstopfen vom Schlauch. Das Wasser fließt in den Behälter. Wenn der Behälter voll ist, stecken Sie den Stopfen wieder in den Schlauch. Entleeren Sie den Behälter.
Was tun, wenn … 25 • 1 mal blinken = „Die Waschmaschine füllt kein Wasser auf“, folgen Sie den Vorschlägen im Feld „Mögliche Ursache/Abhilfe“ und starten Sie das Programm erneut. • 2 mal blinken = „Die Waschmaschine pumpt nicht ab und/oder schleudert nicht“, folgen Sie den Vorschlägen im Feld „Mögliche Ursache/Abhilfe“ und starten Sie das Programm erneut. Beheben Sie die Ursache und drücken Sie dann die Taste 5, um das Programm neu zu starten.
Was tun, wenn … Problem Wasser läuft ein und dann sofort wieder ab: Mögliche Ursache/Abhilfe Das Ende des Ablaufschlauchs liegt zu tief. • Siehe entsprechenden Absatz im Abschnitt „Wasserablauf“. Der Ablaufschlauch ist gequetscht oder geknickt. (Die gelbe Kontrolllampe von Taste 5 blinkt.) • Überprüfen Sie den Anschluss des Ablaufschlauchs. Der Ablauffilter ist verstopft. (Die gelbe Kontrolllampe von Taste 5 blinkt.) • Reinigen Sie den Ablauffilter.
Was tun, wenn … Problem 27 Mögliche Ursache/Abhilfe Die Waschergebnisse sind unbefriedigend: Sie haben zu wenig Waschmittel oder ein ungeeignetes Waschmittel benutzt. • Erhöhen Sie die Waschmittelmenge oder benutzen Sie ein anderes Waschmittel. Hartnäckige Flecken wurden nicht vorbehandelt. • Verwenden Sie zur Behandlung hartnäckiger Flecken handelsübliche Produkte. Falsche Temperatur ausgewählt. • Überprüfen Sie, ob Sie die korrekte Temperatur gewählt haben. Das Gerät ist überladen.
Technische Daten Wenn Sie das Problem nicht genau bestimmen oder lösen können, wenden Sie sich an unseren Kundendienst. Beim Anruf sollten Sie Angaben zum Modell, die Produktnummer, die Seriennummer und das Kaufdatum Ihrer Maschine zur Hand haben: Der Kundendienst benötigt diese Informationen.
Montage Programme Beladung (kg) Energieverbrauch (kWh) Wasserverbrauch (Liter) Ungefähre Programmdauer (in Minuten) Restfeuchte (%)1) Feinwäsche 40 °C 3 0.55 60 65 35 Wolle/Handwäsche 30 °C 2 0.25 53 55 30 Standardprogramme Koch-/Buntwäsche Standardprogramm Koch-/ Buntwäsche 60 °C 6 1.01 42 161 532) / 523) Standardprogramm Koch-/ Buntwäsche 60 °C 3 0.77 35 145 532) / 523) Standardprogramm Koch-/ Buntwäsche 40 °C 3 0.66 35 140 532) / 523) 1) Am Ende der Schleuderphase.
Montage 1. Legen Sie die Maschine nach Entfernen der Verpackung vorsichtig auf die Rückseite, um die Polystyrolplatte unter der Maschine zu entfernen. 2. Entnehmen Sie das Stromkabel und den Ablaufschlauch aus den Schlauchhalterungen auf der Geräterückseite. 3. Lösen Sie die drei Schrauben mit dem Schlüssel, der mit dem Gerät mitgeliefert wurde.
Montage 4. Ziehen Sie die entsprechenden Kunststoff-Distanzstücke heraus. 5. Öffnen Sie die Tür und entnehmen Sie den Zulaufschlauch aus der Trommel sowie den Polystyrolblock, der an der Türdichtung befestigt ist. 6. Verschließen Sie das kleinere obere Loch und die beiden größeren Löcher mit den entsprechenden Kunststoffkappen, die sich im Beutel mit der Benutzerinformation befinden. Schließen Sie den Wasserzulaufschlauch wie in Abschnitt "Wasserzulauf" beschrieben an. 7.
Montage Aufstellen und Ausrichten Stellen Sie das Gerät auf einem ebenen, harten Boden auf. Stellen Sie sicher, dass die Luftzirkulation um die Maschine herum nicht durch Teppiche, Läufer usw. beeinträchtigt wird. Wenn Sie das Gerät auf kleinformatigen Fliesen aufstellen, legen Sie eine Gummimatte unter. Stellen Sie niemals Pappe, Holz oder ähnliches Material unter das Gerät, um Unebenheiten des Bodens auszugleichen.
Montage 1. 2. Öffnen Sie die Tür und ziehen Sie den Zulaufschlauch heraus. Schließen Sie den Schlauch mit dem Winkelverbindungsstück an die Maschine an. Richten Sie den Zulaufschlauch nicht nach unten. Führen Sie den Schlauch in einem Winkel nach links oder rechts, je nach der Position des Wasserhahns. 3. Schließen Sie den Schlauch korrekt durch Lösen der Ringmutter an. Ziehen Sie die Ringmutter nach dem Positionieren des Zulaufschlauchs wieder fest, um Wasseraustritt zu vermeiden. 4.
Montage Wasserstopp-Vorrichtung Der Wasserzulaufschlauch ist mit einer Wasserstopp-Vorrichtung als Schutz gegen Wasserschäden ausgestattet, die durch das natürliche Altern des Schlauchs auftreten können. Dieser Fehler wird durch ein rotes Feld im Sichtfenster "A" angezeigt. Sollte sich diese Störung einstellen, drehen Sie den Wasserhahn zu und lassen Sie vom Kundendienst den Schlauch ersetzen. A Wasserablauf Das Ende des Ablaufschlauchs kann auf drei Weisen angeschlossen werden: 1.
Elektrischer Anschluss 35 Der Ablaufschlauch darf auf max. 4 Meter verlängert werden. Einen Verlängerungsschlauch und ein Verbindungsstück erhalten Sie bei unserem Kundendienst. ELEKTRISCHER ANSCHLUSS Die Daten der elektrischen Anschlusswerte finden sich auf dem Typenschild innen an der Gerätetür. Vergewissern Sie sich, dass die Stromversorgung in Ihrem Haus für die erforderliche Maximallast geeignet ist. Berücksichtigen Sie dabei auch die anderen Elektrogeräte, die Sie verwenden.
erhalten Sie von Ihrer Gemeinde, Ihrer Müllabfuhr oder dem Geschäft, in dem Sie das Produkt gekauft haben. Verpackungsmaterial Materialien mit dem Symbol sind wiederverwertbar. >PE<=Polyethylen >PS<=Polystyrol >PP<=Polypropylen Solche Materialien können der Wiederverwertung zugeführt werden, indem sie ordnungsgemäß in den entsprechenden Sammelbehältern entsorgt werden.
www.aeg.