L 60466 FL DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TECHNISCHE DATEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage oder Verwendung Schäden verursacht. 1.
www.aeg.com • Die elektrische Installation, die Klempnerarbeiten und die Montage des Geräts dürfen nur von einer qualifizierten Fachkraft ausgeführt werden. Auf diese Weise werden Gebäudeschäden und Verletzungen vermieden. • Stellen Sie das Gerät nicht an einem Ort auf, an dem die Temperatur unter 0 °C absinken kann, und benutzen Sie das Gerät nicht, wenn die Temperatur unter 0 °C absinken könnte.
DEUTSCH Die Schutzklasse gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt Wasserdruck 5 IPX4 Min. 0,5 bar (0,05 MPa) Max. 8 bar (0,8 MPa) Kaltwasser Wasserversorgung 1) Maximale Beladung Koch-/Buntwäsche Schleuderdrehzahl Max. 6 kg 1400 U/min 1) Schließen Sie den Zulaufschlauch an einen Wasserhahn mit einem 3/4"-Außengewinde an. 3.
www.aeg.com 4. ZUBEHÖR 1 2 1 Schraubenschlüssel Zum Lösen der Transportschrauben. 2 Kunststoffkappen 4 3 Zum Verschließen der Öffnungen auf der Rückseite des Geräts nach dem Entfernen der Transportschrauben. 3 Aquasafe-Zulaufschlauch Zur Verhinderung von eventuellen Wasserlecks. 4 Kunststoff-Schlauchführung Zum Einhängen des Ablaufschlauchs an einer Waschbeckenkante. 5.
DEUTSCH • 5 Minuten nach dem Ende des Waschprogramms. Siehe „Am Programmende“. 7 5.2 Programmwahlschalter 2 Drehen Sie diesen Schalter, um ein Programm einzustellen. 5.3 Display 3 A B C Das Display zeigt an: A • Programmdauer Wenn das Programm beginnt, verringert sich die angezeigte Zeit in Minutenschritten. • Zeitvorwahl Wenn Sie die Zeitvorwahl-Taste drücken, zeigt das Display die verbleibende Zeit bis zum Programmstart an.
www.aeg.com C Symbol Kindersicherung Das Symbol leuchtet auf, wenn diese Funktion eingeschaltet ist. 5.4 Start-/Pause-Taste 4 5.9 Temperatur-Taste 9 Drücken Sie die Taste 4 , um ein Programm zu starten oder zu unterbrechen. Drücken Sie die Taste 9 zum Ändern der Standardtemperatur. 5.5 Zeitvorwahl-Taste 5 Drücken Sie die Taste 5 , um den Start eines Programms um 30 Minuten bis 20 Stunden zu verzögern. 5.6 Zeitspar-Taste 6 Drücken Sie die Taste 6 , um die Programmdauer zu verkürzen.
DEUTSCH 5.12 Funktion „immer extra spülen“ Mit dieser Funktion können Sie die Funktion „Extra Spülen“ stets beibehalten, auch wenn Sie ein neues Programm einstellen. • Drücken Sie zum Aktivieren der Funktion die Tasten 5 und 6 gleichzeitig 9 so lange, bis die Kontrolllampe der Taste 7 leuchtet. • Drücken Sie zum Deaktivieren der Funktion die Tasten 5 und 6 gleichzeitig so lange, bis die Kontrolllampe der Taste 7 erlischt. 6. PROGRAMME Programm Temperatur Beladung Max.
www.aeg.com Programm Temperatur Beladung Max. Beladung Programmbeschreibung Wolle – Seide Waschmaschinenfeste Wolle. Handwaschbare Wolle und Feinwäsche mit dem „Handwäsche“-Pflegesymbol. Max. 2 kg Hauptwaschgang DREHZAHLRESpülgänge DUZIERUNG Kurzer Schleuder- SPÜLSTOPP gang Schleudern3) Alle Gewebe Die maximale Beladung hängt vom Wäschetyp ab. Abpumpen des Wassers Schleudergang mit maximaler Drehzahl. Pumpen Alle Gewebe Abpumpen des Die maximale BelaWassers dung hängt vom Wäschetyp ab.
DEUTSCH Programm Temperatur Beladung Max. Beladung Energiesparen5) Weiße und farbechte Baumwolle Eco Baumwolle, normal verschmutzt. 60° - 40° Max. 6 kg Programmbeschreibung Funktionen Hauptwaschgang Spülgänge Langer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP EXTRA SPÜLEN ZEIT SPAREN1) 11 1) Wir empfehlen eine reduzierte Beladung, falls die Taste 6 zwei Mal gedrückt wird (die Funktion „Extra Kurz“ eingestellt ist).
www.aeg.com Programme Beladung (kg) Energieverbrauch (kWh) Wasserverbrauch (Liter) Ungefähre Programmdauer (in Minuten) Restfeuchte (%)1) Standardprogramm Baumwolle 60 °C 3 0.64 39 171 52 Standardprogramm Baumwolle 40 °C 3 0.51 39 158 52 1) Am Ende der Schleuderphase. Modell Aus-Zustand (W) Ein-Zustand (W) 0.75 0.75 L60466FL 7. VOR DER ERSTEN INBETRIEBNAHME 1. Zum Aktivieren des Ablaufsystems füllen Sie 2 Liter Wasser in das Hauptfach der Waschmittelschublade. 2.
DEUTSCH 13 Achten Sie darauf, dass keine Wäschestücke zwischen der Dichtung und der Tür stecken. Dies könnte zu Wasserlecks oder Beschädigungen der Wäsche führen. 8.2 Einfüllen von Wasch- und Pflegemitteln Waschmittelfach für die Vorwäsche, das Einweichprogramm und die Flecken-Funktion. Füllen Sie das Waschmittel für den Vorwaschgang, das Einweichen und den Fleckentferner vor dem Start des Programms ein. Waschmittelfach für den Hauptwaschgang.
www.aeg.com Überprüfen Sie die Position der Klappe 1. Ziehen Sie die Waschmittelschublade bis zum Anschlag heraus. 2. Drücken Sie den Hebel nach unten und ziehen Sie die Schublade heraus. 3. Drehen Sie die Klappe nach oben, wenn Sie Waschpulver verwenden. 4. Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Klappe in der unteren Position: – Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz.
DEUTSCH gramm. Sie können jetzt auch die verfügbaren Funktionen einstellen. 8.3 Einstellen und starten eines programms 1. Die Kontrolllampe der Taste 4 blinkt rot. 3. Die Kontrolllampen der Standardtemperatur und der Standarddrehzahl leuchten. Drücken Sie die entsprechenden Tasten, um die Temperatur und/oder Schleuderdrehzahl zu ändern. 4. Stellen Sie die verfügbaren Funktionen und Zeitvorwahl ein.
www.aeg.com Wenn die Temperatur und der Wasserstand in der Trommel zu hoch sind, leuchtet das Türverriegelungssymbol weiterhin und die Tür lässt sich nicht öffnen. Gehen Sie zum Öffnen der Tür wie folgt vor: 1. Schalten Sie das Gerät aus. 2. Warten Sie einige Minuten. 3. Vergewissern Sie sich, dass kein Wasser in der Trommel steht. Wenn Sie das Gerät ausschalten, müssen Sie das Programm anschließend neu einstellen. 9. AM PROGRAMMENDE • Das Gerät stoppt automatisch. • Es ertönen akustische Signale.
DEUTSCH • Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Schließen Sie Gürtel. • Leeren Sie die Taschen und falten Sie die Wäscheteile auseinander. • Wenden Sie mehrlagige Textilien, Wolle und bedruckte Wäschestücke vor dem Waschen. • Entfernen Sie hartnäckige Flecken. • Waschen Sie stark verschmutzte Bereiche mit einem speziellen Waschmittel. • Seien Sie vorsichtig mit Gardinen.
www.aeg.com Härtegrad Art 4 sehr hart Wasserhärte °dH °TH mmol/l Clarke > 21 > 37 >3.7 >25 11. REINIGUNG UND PFLEGE WARNUNG! Trennen Sie das Gerät von der Stromversorgung, bevor Sie es reinigen. 11.1 Entkalken Normales Leitungswasser enthält Kalk. Falls erforderlich, benutzen Sie einen Enthärter, um Kalkablagerungen zu entfernen. Verwenden Sie ein Produkt, das speziell für Waschmaschinen hergestellt wird. Halten Sie sich an die Herstelleranweisungen auf der Verpackung.
DEUTSCH • Starten Sie ein kurzes Programm für Koch-/Buntwäsche mit der maximalen 19 Temperatur und einer kleinen Menge Waschmittel. 11.6 Waschmittelschublade So reinigen Sie die Waschmittelschublade: 1 1. 2. Drücken Sie auf den Hebel. Ziehen Sie die Waschmittelschublade heraus. 3. Entfernen Sie den oberen Teil des Pflegemittelfachs. Reinigen Sie alle Teile mit Wasser. 2 4. 5. 6. 11.7 Ablaufpumpe Kontrollieren Sie regelmäßig die Ablaufpumpe und sorgen Sie dafür, dass sie sauber ist.
www.aeg.com So reinigen Sie die Ablaufpumpe: 1. Öffnen Sie die Ablaufpumpenklappe. 2. Stellen Sie einen geeigneten Behälter unter die Öffnung der Ablaufpumpe, um das Restwasser aufzufangen. Drücken Sie auf die beiden Hebel und ziehen Sie den Ablaufschlauch nach vorne, um das Wasser abzulassen. Wenn der Behälter voll ist, schieben Sie den Ablaufschlauch wieder zurück und leeren Sie den Behälter. Wiederholen Sie die Schritte 3 und 4, bis kein Wasser mehr aus der Ablaufpumpe fließt. 3. 4. 1 5.
DEUTSCH 8. 1 2 9. 21 Reinigen Sie den Filter unter Leitungswasser und setzen Sie ihn wieder in die dafür vorgesehenen Führungen in der Pumpe ein. Vergewissern Sie sich, dass der Filter richtig festgedreht ist, damit kein Wasser austreten kann. 10. Schließen Sie die Pumpenklappe. 11.8 Zulaufschlauchfilter und Ventilfilter Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein.
www.aeg.com 6. 20° 45° 7. 11.9 Notentleerung 1. Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (6) unter „So reinigen Sie die Ablaufpumpe“ durch. Reinigen Sie bei Bedarf die Pumpe. Bringen Sie den Ablaufkanal wieder in seine ursprüngliche Position und schließen Sie die Ablaufpumpenklappe. Wenn Sie das Wasser über das Notentleerungsverfahren abpumpen, müssen Sie das Abpumpsystem wieder aktivieren: 1.
DEUTSCH 23 Problem Mögliche Ursache Mögliche Abhilfe Es läuft kein Wasser in das Gerät. Der Wasserhahn ist geschlossen. Drehen Sie den Wasserhahn auf. Der Wasserzulaufschlauch ist beschädigt. Vergewissern Sie sich, dass der Wasserzulaufschlauch nicht beschädigt ist. Die Filter im Wasserzulaufschlauch sind zugesetzt. Reinigen Sie die Filter. Siehe unter „Reinigung und Pflege“. Der Wasserhahn ist blockiert oder durch Kalkablagerungen verstopft. Reinigen Sie den Wasserhahn.
www.aeg.com Problem Mögliche Ursache Mögliche Abhilfe Das Programm startet nicht. Der Netzstecker steckt nicht richtig in der Steckdose. Stecken Sie den Netzstecker in die Steckdose. Die Sicherung im Haussicherungskasten ist durchgebrannt. Setzen Sie eine neue Sicherung ein. Sie haben nicht die Taste 4 gedrückt. Drücken Sie die Taste 4 . Die Zeitvorwahl ist eingestellt. Um das Programm sofort zu starten, brechen Sie die Zeitvorwahl ab. Die Kindersicherung ist eingeschaltet.
DEUTSCH Problem Mögliche Ursache Mögliche Abhilfe Sie haben hartnäckige Flecken nicht vor dem Waschgang entfernt. Verwenden Sie zur Entfernung hartnäckiger Flecken Spezialprodukte. Es wurde eine falsche Temperatur eingestellt. Achten Sie darauf, die richtige Temperatur einzustellen. 25 Es befindet sich zu viel Verringern Sie die Beladung. Wäsche in der Trommel. Schalten Sie das Gerät nach der Überprüfung wieder ein. Das Programm wird an der Stelle fortgesetzt, an der es unterbrochen wurde.
www.aeg.com 4. Entfernen Sie die innere Folie. 5. Öffnen Sie die Tür und entnehmen Sie alle Gegenstände, die sich in der Trommel befinden. 6. Legen Sie eines der Styroporverpackungsteile hinter dem Gerät auf den Boden. Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. Achten Sie darauf, nicht die Schläuche zu beschädigen. 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 8.
DEUTSCH 9. 27 Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen. 10. Lösen Sie die drei Schrauben. Ver- wenden Sie dazu den mitgelieferten Schraubenschlüssel. 11. Ziehen Sie die Kunststoff-Abstandshalter heraus. 12. Setzen Sie die Kunststoffkappen in die Öffnungen. Diese Kappen finden Sie im Beutel mit der Gebrauchsanleitung. – Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren.
www.aeg.com 13.3 Aufstellen und Ausrichten • Stellen Sie das Gerät auf einen ebenen, festen Boden. • Stellen Sie sicher, dass die Luftzirkulation unter dem Gerät nicht durch Teppiche beeinträchtigt wird. • Vergewissern Sie sich, dass die Maschine weder die Wand noch andere Geräte berührt. • Schrauben Sie die Füße zum Ausrichten des Geräts weiter heraus oder hinein.
DEUTSCH 29 • Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"-Außengewinde an. VORSICHT! Achten Sie darauf, dass die Anschlüsse dicht sind. Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist. Wenden Sie sich an den Kundendienst, um einen anderen Zulaufschlauch zu erhalten. Aquastopp-Einrichtung A 13.5 Wasserablauf Es gibt mehrere Möglichkeiten, den Ablaufschlauch anzuschließen: Mit der Kunststoff-Schlauchführung.
www.aeg.com • Über eine Waschbeckenkante. • Stellen Sie sicher, dass die KunststoffFührung beim Abpumpen nicht abrutschen kann. Befestigen Sie deswegen die Führung am Wasserhahn oder an der Wand. • An ein Standrohr mit Entlüftungsöffnung. Orientieren Sie sich an der Abbildung. Direkte Einleitung in ein Ablaufrohr auf einer Höhe nicht unter 60 cm und nicht über 100 cm. Das Ende des Ablaufschlauchs muss immer belüftet sein, d.h.
DEUTSCH 14. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
132925540-A-162012 www.aeg.