DE Benutzerinformation Waschmaschine L61264ETL - L62069TL L62260TL
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN.................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................... 4 3. GERÄTEBESCHREIBUNG...............................................................................................6 4. BEDIENFELD................................................................................................................... 6 5.
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.
www.aeg.com • • • • • Das Gerät muss mit den mitgelieferten neuen Schläuchen an die Wasserversorgung angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden. Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, seinem autorisierten Kundenservice oder einer gleichermaßen qualifizierten Person ausgetauscht werden, um Gefahrenquellen zu vermeiden. Schalten Sie das Gerät immer aus und ziehen Sie den Netzstecker aus der Steckdose, bevor Reinigungsarbeiten durchgeführt werden.
DEUTSCH • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen. • Stecken Sie den Netzstecker erst nach Abschluss der Montage in die Steckdose. Stellen Sie sicher, dass der Netzstecker nach der Montage noch zugänglich ist. • Fassen Sie das Netzkabel oder den Netzstecker nicht mit nassen Händen an.
www.aeg.com 3. GERÄTEBESCHREIBUNG 3.1 Geräteübersicht 1 2 3 7 Bedienblende Deckel Deckelgriff Filter Ablaufpumpe Hebel zum Bewegen des Geräts Schraubfüße zum Ausrichten des Geräts 7 Typschild 1 2 3 4 5 6 4 5 6 4. BEDIENFELD 4.
DEUTSCH 7 4.2 Display A B C Zeitbereich: A Programmdauer Zeitvorwahl Alarmcodes Fehlermeldung Wenn das Programm beendet ist. Anzeige Tür verriegelt: B Sie können die Gerätetür nicht öffnen, solange diese Anzeige leuchtet. Wenn die Anzeige blinkt, kann die Gerätetür nicht geöffnet werden. Bitte warten Sie in diesem Fall einige Minuten, bevor Sie die Tür öffnen. Sie können die Tür erst öffnen, wenn diese Anzeige erlischt.
www.aeg.com Programm Temperaturbereich Maximale Beladung Programmbeschreibung Maximale Schleuder- (Beladung und Verschmutzungsgrad) drehzahl Koch/Bunt + Vorwäsche 95 °C - Kalt 6 kg Weiße und bunte Baumwollwäsche. Stark 1000 U/min und normal verschmutzt. (L62069TL) 1200 U/min (L62260TL - L61264ETL) Koch/Bunt + Flecken 95 °C - 40 °C 6 kg Weiße und farbbeständige Baumwollwä1000 U/min sche, stark verschmutzt. Stark verschmutzt. (L62069TL) 1200 U/min (L62260TL - L61264ETL) Pflegeleicht 60 °C - Kalt 2.
DEUTSCH Programm Temperaturbereich Maximale Beladung Programmbeschreibung Maximale Schleuder- (Beladung und Verschmutzungsgrad) drehzahl Mix 20° 20 °C 2.5 kg 1000 U/min (L62069TL) 1200 U/min (L62260TL - L61264ETL) 9 Spezialprogramm für leicht verschmutzte Baumwollwäsche, Synthetik- oder Mischgewebe. Dieses Programm hilft den Energieverbrauch zu senken. Verwenden Sie ein Waschmittel für niedrige Temperaturen, um ein gutes Waschergebnis zu erzielen3).
www.aeg.com Programm U./Min. Flüssig Dosierung Extra Spü- Zeit Spa- len1) ren2) Zeitvorwahl Koch/Bunt + Vorwäsche ■ ■ ■ ■ ■ ■ Koch/Bunt + Flecken ■ ■ ■ ■ ■ ■ Pflegeleicht ■ ■ ■ ■ ■ ■ Pflegeleicht + Vorwäsche ■ ■ ■ ■ ■ ■ Leichtbügeln ■ ■ ■ ■ ■ ■ Feinwäsche ■ ■ ■ ■ ■ ■ Wolle/Seide ■ ■ ■ Schleudern ■ ■ ■ Pumpen Spülen ■ ■ Mix 20° ■ ■ Jeans ■ ■ 20 Min.
DEUTSCH 11 Am Programmstart zeigt das Display die Programmdauer für die maximale Beladung an. Während der Waschphase wird die Programmdauer automatisch berechnet und verringert sich möglicherweise beträchtlich, wenn die Wäsche weniger wiegt als die maximal zulässige Beladung. Zum Beispiel beträgt die maximale Beladung bei Baumwolle 60 °C 6 kg und die Programmdauer überschreitet 2 Stunden. Wiegt die tatsächliche Beladung 1 kg, verringert sich die Programmdauer auf unter 1 Stunde.
www.aeg.com Aus-Zustand (W) Ein-Zustand (W) 0,48 0,48 Die in der Tabelle oben enthaltenen Informationen erfüllen die Verordnung (EG) 1015/2010 der Kommission zur Durchführung der Richtlinie EG/2009/125. 7. OPTIONEN 7.1 Temp. Wählen Sie diese Option zum Ändern der Standardtemperatur. Anzeige = kaltes Wasser. Die Kontrolllampe der eingestellten Temperatur leuchtet auf. 7.2 U./Min. Mit dieser Option können Sie die Standard-Schleuderdrehzahl reduzieren. Die entsprechende Kontrolllampe leuchtet auf.
DEUTSCH 8. EINSTELLUNGEN 8.1 Kindersicherung Diese Option verhindert, dass Kinder mit dem Bedienfeld spielen. • Drücken Sie zum Ein-/Ausschalten dieser Option Flüssig Dosierung und Zeit Sparen gleichzeitig, bis die aufleuchtet/erlischt. Anzeige Sie können diese Option einschalten: • Nachdem Sie Start/Pause gedrückt haben: Die Optionen und der Programmwahlschalter sind gesperrt. • Bevor Sie Start/Pause drücken: Das Gerät kann nicht starten. 8.
www.aeg.com 10.4 Waschmittelfächer ACHTUNG! Verwenden Sie ausschließlich speziell für Waschmaschinen bestimmte Waschmittel. Halten Sie sich immer an die Anweisungen auf der Verpackung der Waschmittelprodukte. Waschmittelfach für die Vorwäsche. Füllen Sie nicht mehr Waschmittel (Pulver- oder Flüssigwaschmittel) ein als bis zu den Marken MAX. Waschmittelfach für die Hauptwäsche. Füllen Sie nicht mehr Waschmittel (Pulver- oder Flüssigwaschmittel) ein als bis zu den Marken MAX.
DEUTSCH 15 10.5 Flüssigwaschmittel oder Waschpulver CLICK A 2. 1. CLICK B 3. 4. • Position A für Waschpulver (Werkseinstellung). • Position B für Flüssigwaschmittel. Bei Verwendung von Flüssigwaschmitteln: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Obergrenze. 10.6 Einstellen eines Programms 1.
www.aeg.com 10.8 Verhalten des Gerätes Etwa 15 Minuten nach dem Start des Programms: • Das Gerät stellt automatisch die Programmdauer für die Menge der eingefüllten Wäsche in der Trommel ein, um perfekte Waschergebnisse in kurzer Zeit zu erzielen. • Das Display zeigt die neue Dauer an. 10.11 Unterbrechen eines Programms und Ändern einer Funktion Einige Optionen können nur geändert werden, bevor sie durchgeführt werden. 1. Drücken Sie die Taste Start/Pause. Die zugehörige Kontrolllampe blinkt. 2.
DEUTSCH Öffnen Sie die Tür folgendermaßen: 1. Halten Sie die Ein/Aus-Taste einige Sekunden lang gedrückt, um das Gerät auszuschalten. 2. Warten Sie einige Minuten, bevor Sie die Tür vorsichtig öffnen. 3. Schließen Sie die Gerätetür. 4. Schalten Sie das Gerät ein und stellen Sie das Programm erneut ein. 10.14 Öffnen der Tür, wenn die Zeitvorwahl eingeschaltet ist Während die Zeitvorwahl eingeschaltet ist, ist die Tür verriegelt. So öffnen Sie die Gerätetür: 1. Drücken Sie die Taste Start/Pause.
www.aeg.com • Wenn Sie nicht innerhalb von 5 Minuten die Taste Start/Pause drücken. Drücken Sie die Taste Ein/Aus, um das Gerät wieder einzuschalten. • 5 Minuten nach Ende eines Waschprogramms. Drücken Sie die Taste Ein/Aus, um das Gerät wieder einzuschalten. Im Display wird das Ende des zuletzt eingestellten Programms angezeigt. Drehen Sie den Programmwahlschalter, um ein neues Programm einzustellen. 11. TIPPS UND HINWEISE WARNUNG! Siehe Kapitel Sicherheitshinweise. verursachen.
DEUTSCH • Ist Ihr Gerät nicht mit einer Klappe in der Waschmittelschublade ausgerüstet, geben Sie das Flüssigwaschmittel in eine Dosierkugel (vom Hersteller des Waschmittels). 11.4 Umwelttipps • Stellen Sie zum Waschen normal verschmutzter Wäsche ein Programm ohne Vorwäsche ein. • Waschen Sie immer mit der angegebenen maximalen Beladung. • Benutzen Sie ggf. einen Fleckentferner, wenn Sie ein Programm mit niedriger Temperatur auswählen.
www.aeg.com 12.4 Reinigen der Waschmittelschublade 1. 2. 3. 12.5 Reinigen des Ablauffilters WARNUNG! Reinigen Sie den Ablauffilter nicht, wenn das Wasser im Gerät heiß ist. 1. 2.
DEUTSCH 3. 4. 5. 12.6 Reinigen des Zulaufschlauchs und Ventilfilters 1. 2.
www.aeg.com 3. 4. 90˚ 12.7 Notentleerung Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (5) unter „Reinigen des Ablauffilters“ durch. Reinigen Sie bei Bedarf die Pumpe. und lassen Sie das Wasser aus dem Schlauch fließen. 4. Leeren Sie die Ablaufpumpe. Siehe Notentleerungsverfahren. 5. Befestigen Sie den Zulaufschlauch wieder, wenn die Ablaufpumpe entleert ist.
DEUTSCH • - Die Stromzufuhr ist nicht konstant. Warten Sie, bis die Netzspannung wieder konstant ist. • - Das Aqua-Control-System ist eingeschaltet. Schalten Sie das Gerät aus und drehen Sie den Wasserhahn zu. Wenden Sie sich an den autorisierten Kundendienst. 23 WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. 13.2 Mögliche Fehler Problem Mögliche Abhilfe Das Programm startet nicht. Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist.
www.aeg.com Problem Mögliche Abhilfe Vergewissern Sie sich, dass der Ablauffilter nicht verstopft ist. Reinigen Sie ggf. den Filter. Siehe „Reinigung und Pflege“. Vergewissern Sie sich, dass der Wasserablaufschlauch ordnungsgemäß angebracht ist. Haben Sie ein Programm ohne Abpumpphase gewählt, stellen Sie das Abpumpprogramm ein. Haben Sie ein Programm mit Spülstopp gewählt, stellen Sie das Abpumpprogramm ein. Das Gerät schleudert nicht oder das Waschprogramm dauert länger als gewöhnlich.
DEUTSCH 25 Problem Mögliche Abhilfe Die Waschergebnisse sind nicht zufriedenstellend. Erhöhen Sie die Waschmittelmenge oder benutzen Sie ein anderes Waschmittel. Entfernen Sie vor dem Waschgang hartnäckige Flecken mit einem Spezialprodukt. Achten Sie darauf, die richtige Temperatur einzustellen. Verringern Sie die Beladung. Sie können keine Option einstellen. Achten Sie darauf, dass Sie nur die gewünschte(n) Taste(n) berühren. Schalten Sie das Gerät nach der Überprüfung wieder ein.
www.aeg.com 15. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
DEUTSCH 27
108863201-A-202014 www.aeg.