FR Notice d'utilisation Lave-linge L61260TL - L61460TL
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................... 3 2. CONSIGNES DE SÉCURITÉ........................................................................................... 4 3. DESCRIPTION DE L'APPAREIL...................................................................................... 6 4. BANDEAU DE COMMANDE......................................................................................... 6 5.
FRANÇAIS 1. 3 INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • Les orifices d'aération situés à la base (si présents) ne doivent pas être obstrués par de la moquette, un tapis, ou tout type de revêtement de sol. L'appareil doit être raccordé à l'arrivée d'eau à l'aide des tuyaux neufs fournis, ou d'autres tuyaux neufs fournis par le service après-vente agréé. N'utilisez pas de tuyaux provenant d'anciens appareils.
FRANÇAIS • Utilisez toujours une prise de courant de sécurité correctement installée. • Vérifiez que les données électriques figurant sur la plaque signalétique correspondent à celles de votre réseau. Si ce n'est pas le cas, contactez un électricien. • N'utilisez pas d'adaptateurs multiprises ni de rallonges. • Veillez à ne pas endommager la fiche secteur ni le câble d'alimentation. Le remplacement du cordon d'alimentation de l'appareil doit être effectué par notre service après-vente agréé.
www.aeg.com 3. DESCRIPTION DE L'APPAREIL 3.1 Vue d'ensemble de l'appareil 1 2 3 7 Bandeau de commande Couvercle Poignée du couvercle Filtre de la pompe de vidange Levier de déplacement du lave-linge Pieds pour la mise de niveau de l'appareil 7 Plaque signalétique 1 2 3 4 5 6 4 5 6 4. BANDEAU DE COMMANDE 4.
FRANÇAIS 8 Touche Essorage (Essorage) 9 Touche de température (Temp.) 4.2 Affichage A B C Zone de temps : A Durée du programme Départ différé Codes d'alarme Message d'erreur Le programme est terminé. Voyant Couvercle verrouillé : B Vous ne pouvez pas ouvrir le couvercle de l'appareil lorsque ce voyant est allumé. Vous ne pouvez pas ouvrir le couvercle de l'appareil lorsque ce voyant clignote. Attendez quelques minutes avant d'ouvrir le couvercle.
www.aeg.com Programme Plage de températures Charge maximale Vitesse d'essorage maximale Description du programme (Type de charge et degré de salissure) Blanc/Couleurs 95 °C - Froid 6 kg 1200 tr/min (L 61260 TL) 1400 tr/min (L 61460 TL) Coton blanc et couleurs. Normalement sale ou légèrement sale. + Prélavage 95 °C - Froid 6 kg 1200 tr/min (L 61260 TL) 1400 tr/min (L 61460 TL) Coton blanc et couleurs. Normalement sale ou très sale.
FRANÇAIS 9 Programme Plage de températures Charge maximale Vitesse d'essorage maximale Description du programme (Type de charge et degré de salissure) Mix 20° 20 °C 2,5 kg 1200 tr/min (L 61260 TL) 1200 tr/min (L 61460 TL) Programme spécial pour le coton, les textiles synthétiques et mixtes légèrement sales. Sélectionnez ce programme pour diminuer la consommation d'énergie. Pour obtenir de bons résultats de lavage, assurezvous que le produit de lavage est adapté au lavage à basse température.2).
www.aeg.com Programme Lessive Rinçage Liquide Plus1) Essorage Gain de Temp s2) Départ Différé + Taches ■ ■ ■ ■ ■ ■ Synthétiques ■ ■ ■ ■ ■ ■ Repassage Facile ■ ■ ■ ■ ■ ■ Délicats ■ ■ ■ ■ ■ ■ Laine/Soie ■ ■ ■ Essorage ■ ■ ■ Vidange Rinçage ■ ■ Mix 20° ■ ■ Jeans ■ ■ 20 min.-3Kg ■ Coton Eco ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 3) ■ 1) Si l'option Rinçage plus permanent est activée, l'appareil ajoute des rinçages supplémentaires.
FRANÇAIS 11 6. VALEURS DE CONSOMMATION Les données de ce tableau sont approximatives. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, la température ambiante ou de l'eau. Au démarrage du programme, l'affichage indique la durée du programme pour la charge maximale. Durant la phase de lavage, la durée du programme est calculée automatiquement.
www.aeg.com Mode « Éteint » (W) 0,48 Mode « Veille » (W) 0,48 Les informations fournies dans le tableau ci-dessus sont conformes à la directive d'application 1015/2010 de la réglementation 2009/125/EC de la commission européenne. 7. OPTIONS 7.1 Temp. Le voyant correspondant s'allume. Sélectionnez cette option pour modifier la température par défaut. 7.4 Rinçage Plus Voyant = eau froide. Le voyant de la température réglée s'allume. 7.
FRANÇAIS 13 8. RÉGLAGES 8.1 Sécurité enfants Avec cette option, vous pouvez empêcher les enfants de jouer avec le bandeau de commande. • Pour activer/désactiver cette option, appuyez simultanément sur les touches Lessive Liquide et Gain de Temps jusqu'à ce que le voyant s'allume/s'éteigne. Vous pouvez activer cette option : • Après avoir appuyé sur Départ/ Pause : les options et le sélecteur de programme sont verrouillés. • Avant d'appuyer sur Départ/Pause : l'appareil ne peut pas démarrer. 8.
www.aeg.com 10.4 Compartiments Compartiment à lessive pour la phase de prélavage. Le repère MAX correspond au niveau maximal de lessive (en poudre ou liquide). Compartiment à lessive pour la phase de lavage. Le repère MAX correspond au niveau maximal de lessive (en poudre ou liquide). Compartiment réservé aux additifs liquides (assouplissant, amidon). Le repère M indique le niveau maximal pour les additifs liquides. Volet pour produit de lavage en poudre ou liquide. 10.
FRANÇAIS 15 CLICK 3. 4. • Position A pour la lessive en poudre (réglage d'usine). • Position B pour la lessive liquide. B Si vous utilisez une lessive liquide : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne dépassez pas le niveau maximal. 10.6 Réglage d'un programme 1. Tournez le sélecteur pour régler le programme : • Le voyant Départ/Pause clignote. • L'affichage indique la durée du programme. 2.
www.aeg.com 10.10 Annulation du départ différé Pour annuler le départ différé : 1. Appuyez sur Départ/Pause pour mettre l'appareil en pause. Le voyant correspondant clignote. 2. Appuyez à plusieurs reprises sur Départ Différé jusqu'à ce que ' s'affiche. 3. Appuyez de nouveau sur la touche Départ/Pause pour lancer immédiatement le programme. 10.11 Interruption d'un programme et modification d'une fonction Vous ne pouvez modifier que quelques options avant qu'elles ne soient actives. 1.
FRANÇAIS Cinq minutes après la fin du programme, la fonction d'économie d'énergie éteint automatiquement l'appareil. 2. 3. 4. 5. Lorsque vous rallumez l'appareil, le dernier programme sélectionné s'affiche. Tournez le sélecteur pour choisir un nouveau cycle. Sortez le linge de l'appareil. Vérifiez que le tambour est vide. Laissez le couvercle entrouvert pour éviter la formation de moisissures et l'apparition de mauvaises odeurs. Fermez le robinet d'eau. 10.
www.aeg.com • Ne lavez pas d'articles sans ourlet ou déchirés dans l'appareil. Utilisez un sac de lavage pour les articles très petits et/ou délicats (par exemple les soutiens-gorge à armatures, les ceintures, les bas, etc.). • Une très petite charge peut provoquer des problèmes d'équilibre pendant la phase d'essorage. Si cela se produit, répartissez manuellement les articles dans la cuve et lancez à nouveau la phase d'essorage. 11.
FRANÇAIS spéciaux pour lave-linge. Procédez séparément d'un lavage de linge. ATTENTION! N'utilisez pas d'alcool, de solvants ni de produits chimiques. Respectez toujours les instructions figurant sur l'emballage du produit. 12.2 Détartrage 12.3 Lavage d'entretien Si, dans votre région, la dureté de l'eau est élevée ou modérée, il est recommandé d'utiliser un adoucisseur d'eau pour lave-linge.
www.aeg.com 1. 2. 3. 4. 5.
FRANÇAIS 21 12.6 Nettoyage du tuyau d'arrivée d'eau et du filtre de la vanne 1. 2. 1 2 3 3. 4. 90˚ 12.7 Vidange d'urgence En raison d'une anomalie de fonctionnement, l'appareil ne peut pas vidanger l'eau. Si cela se produit, procédez aux étapes (1) à (5) du chapitre « Nettoyage du filtre de vidange ». Si nécessaire, nettoyez la pompe. 12.
www.aeg.com 13. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 13.1 Introduction L'appareil ne démarre pas ou s'arrête en cours de programme. Dans un premier temps, essayez de trouver une solution au problème (reportez-vous au tableau). Si vous n'y parvenez pas, contactez le service aprèsvente agréé. Pour certaines anomalies, un signal sonore se fait entendre et un code d'alarme s'affiche : • • - L'appareil ne se vidange pas.
FRANÇAIS Problème 23 Solution possible Assurez-vous que le tuyau d'arrivée d'eau n'est pas tordu ni plié. Vérifiez que le raccordement du tuyau d'arrivée d'eau est correct. L'appareil ne se remplit pas d'eau et se vidange immédiatement. Vérifiez que la position du tuyau de vidange est correcte. Le tuyau est peut-être trop bas. L'appareil ne vidange pas l'eau. Assurez-vous que le siphon de l'évier n'est pas obstrué. Assurez-vous que le tuyau de vidange n'est pas tordu ni plié.
www.aeg.com Problème Solution possible L'appareil fait un bruit in- Vérifiez que l'appareil est de niveau. Reportez-vous au chapitre habituel. « Installation ». Vérifiez que l'emballage et/ou les boulons de transport ont été retirés. Reportez-vous au chapitre « Installation ». Ajoutez plus de linge dans le tambour. La charge est peut-être trop légère. Le cycle est plus court que la durée affichée. L'appareil calcule une nouvelle durée selon la charge de linge.
FRANÇAIS 25 Eau froide Arrivée d'eau 1) Charge maximale Coton 6 kg Vitesse d'essorage Maximale 1200 tr/min (L 61260 TL) 1400 tr/min (L 61460 TL) 1) Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 pouce). 15. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Veuillez recycler tous les matériaux portant le symbole . Aidez à protéger l'environnement pour les générations futures en jetant les matériaux d'emballage de façon adaptée.
www.aeg.
FRANÇAIS 27
108880003-A-162016 www.aeg.