User manual

After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
Authorised Service Centre.
If the display shows other alarm codes.
Deactivate and activate the appliance. If
the problem continues, contact the
Service.
15. TECHNICAL DATA
Dimension Width/ Height/ Depth/
Total depth
596 mm/ 818 mm/ 544 mm/ 560 mm
Electrical connection Voltage
Overall power
Fuse
Frequency
230-240 V
2050 W
13 A
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture
IPX4
Water supply pressure
1)
Minimum
Maximum
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Water supply
2)
Cold water
Maximum Load Cotton 7 kg
Energy Efficiency Class A++
Spin Speed Maximum spin speed 1351 rpm
1)
The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your
domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2)
Connect the water inlet hose to a water tap with a 3/4'' thread.
16. PRODUCT INFORMATION SHEET IN REFERENCE
TO E.U. REGULATION 1369/2017
Product Information Sheet
Trade Mark AEG
Model L61470BI, PNC914528149
Rated capacity in kg 7
Energy efficiency class A++
ENGLISH 33