User manual

Remove the power supply cable and the

drain hose from the hose holders.

Remove the three bolts. Use the key supplied

with the appliance. Pull out the plastic

spacers.

Put the plastic caps in the holes. You can find

these caps in the user manual bag.

We recommend that you keep the packaging and the transit bolts for any

movements of the appliance.

14.2 Positioning and levelling

• Install the appliance on a flat hard floor.

• Make sure that air circulation around the

appliance is not impeded by carpets, rugs

etc.

• Level the appliance by raising or lowering

the feet.