User manual

Installing anti-tilting device

If the height of the counter is 820 mm or lower, you cannot install the anti-

tilting device.

Remove the screws of the top cover on the

rear of the appliance and install the anti-

tilting device as shown in the drawing.

~10mm

Adjust the anti-tilting device so that the

distance from the counter is 10mm. Loosen

the nut counterclockwise with a 3mm wrench.

Adjust the height and turn the nut clockwise

to fix it.

3.6 Preparation and assembly of the door

The appliance is originally pre set for the

assembly of a door opening from right to left.