User manual

After having levelled the appliance,
tighten the lock nuts.
The appliance must be level and sta-
ble.
Never place cardboard, wood or
similar materials under the ma-
chine to compensate for any un-
evenness in the floor.
If it is impossible to avoid positioning
the machine next to a gas cooker or
coalburning stove, an insulating panel
covered with aluminium foil on the side
facing the cooker or stove, must be in-
serted between the two appliances.
Before placing it on small tiles, apply a
rubber coating.
The water inlet hose and the drain hose
must not be kinked.
CAUTION!
The machine must not be instal-
led in rooms where the tempera-
ture can drop below 0°C.
Raising the appliance
Suspended wooden floors are particular-
ly susceptible to vibration
. To help prevent vibration we recom-
mend you place a waterproof wood pan-
el, at least 15 mm thick under the appli-
ance, secured to at least 2 floor beams
with screws, the wood panel must ex-
tend beyond the front feet.
If possible install the appliance in one of
the corners of the room, where the floor
is more stable
13.3 The inlet hose
20
O
20
O
20
O
45
O
45
O
45
O
Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
((1*/,6+ 29