User manual

After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
Authorised Service Centre.
If the display shows other alarm codes.
Deactivate and activate the appliance. If
the problem continues, contact the
Service.
16. INSTALLATION
16.1 Unpacking
WARNING!
Remove all the packaging and the transit bolts before installing the
appliance.
Use the gloves. Remove the external film. If
necessary, use a cutter.
Remove the cardboard top. Remove the
polystyrene packaging materials.
Remove the internal film.
ENGLISH 27