User manual

Programme
Temperature
range
Maximum load
Maximum spin
speed
Programme description
(Type of load and soil level)
Spin
7 kg
1200 rpm
To spin the laundry and to drain the water in the
drum. All fabrics.
Drain
7 kg To drain the water in the drum. All fabrics.
Rinse
7 kg
1200 rpm
To rinse and spin the laundry. All fabrics.
Mix 20°
20°C
3 kg
1200 rpm
Special programme for cotton, synthetic and mixed
fabrics with light soil. Set this programme to de-
crease the energy consumption. Make sure that the
detergent is for low temperature in order to have
good washing results
3)
.
Jeans
60°C - Cold
7 kg
1200 rpm
Items in denim and jersey. Also for dark coloured
items.
20 min.-3Kg
40°C - 30°C
3 kg
1200 rpm
Cottons and synthetics items with light soil level
or worn only once.
Cottons Eco
4)
60°C - 40°C
7 kg
1200 rpm
White cotton and colour-fast cotton. Normal soil.
The energy consumption decreases and the time of
the washing programme is extended.
1)
To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft
wash and spin phase. The appliance adds some rinses.
2)
During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum
doesn't rotate or doesn't rotate properly. Consider this as a normal functioning of the appliance.
3)
The appliance performs the short heating phase if the water temperature is below 20°C. The appli-
ance can show the temperature setting as “cold”.
4)
Standard programmes for the Energy Label consumption values. According to regulation
1061/2010, these programmes are respectively the «Standard 60°C cotton programme» and the «Stand-
ard 40°C cotton programme». They are the most efficient programmes in terms of combined energy and
water consumption for washing normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature declared
for the selected programme.
www.aeg.com8