Manual

3. Press button On/Off to activate the
appliance.
A short tune sounds.
9.5 Setting a programme
1. Turn the programme knob and set
the programme:
• The indicator of Inicio/Pausa
flashes.
• The display shows the
programme duration.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
If you set something
incorrect, the display shows
the message Err.
9.6 Starting a programme
without the delay start
Press button Inicio/Pausa to start the
programme.
The relevant indicator stops to flash and
stays on.
The programme starts, the door is
locked. The display show the indicator
.
The drain pump can operate
for a short time when the
appliance fills water.
9.7 Behaviour of the appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
9.8 Starting a programme with
the delay start
1. Press button Inicio Diferido again
and again until the display shows the
delay you want to set.
2. Press button Inicio/Pausa.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Inicio/Pausa to start the
appliance, you can cancel or
change the set of the delay
start.
9.9 Cancelling the delay start
To cancel the delay start:
1. Press button Inicio/Pausa to set the
appliance to pause.
The related indicator flashes.
2. Press button Inicio Diferido
repeatedly until the display shows
.
3. Press button Inicio/Pausa again to
start the programme immediately.
9.10 Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1. Press button Inicio/Pausa.
The related indicator flashes.
2. Change the function set.
3. Press the button Inicio/Pausa again.
The programme continues.
9.11 Cancelling a programme
1. Turn the programme knob to to
cancel the programme.
2. Turn again the programme knob to a
new washing programme. At this
time you can also set the available
functions.
www.aeg.com
12