LAVAMAT 64850L EN User manual
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 6 8 8 10 11 16 17 20 21 26 30 30 34 Safety information Safety instructions Product description Special accessories for installation Control panel Personalization Daily use Helpful hints and tips Washing programmes Consumption values Care and cleaning What to do if… Technical data Installation Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
Safety instructions 5 • The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. SAFETY INSTRUCTIONS Installation • • • • • • • • • • Remove all the packaging and the transit bolts. Keep the transit bolts. When you move the appliance again you must block the drum. Do not install or use a damaged appliance.
Product description • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household environment.
Product description 7 2 1 3 4 6 1 2 3 4 5 6 5 Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for prewash phase or stain remover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added during the STAIN-Action phase in the main wash. Compartment for powder or liquid detergent used for main wash. Compartment for liquid additives (fabric softener, starch).
Child safety device Make sure that children or pets do not climb into the drum. To prevent children or pets becoming trapped inside the drum the machine incorporates a special feature. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anticlockwise until the groove is vertical.
Control panel 1 1 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 Programme selector dial TEMPERATURE button SPIN button STAIN button SENSITIVE button TIME SAVING button Display START/PAUSE button DELAY START button Indicator pilot lights Table of symbol = Handwash = Rinse Hold = Cold = Child Lock Display (7) 7.1 Duration of selected programme: Duration of selected programme : After selecting a programme, the duration is displayed in ).
Personalization In the event of operating problems, some alarm codes can be displayed, for example (see chapter «What to do if...»). End of programme When the programme has finished a blinking zero is displayed, the DOOR pilot light (10.2), the WASHING pilot light (10.1) and the pilot light of button 8 go out and the door can be opened.
Daily use 11 • Before pressing button 8: it will be impossible to start the machine. • after pressing button 8: it will be impossible to change any other programme or option. To enable or disable this option press simultaneously for about 6 seconds buttons 4 and 5 until the symbol 7.3 appears or disappears on or from the display. DAILY USE Load the laundry 1. 2. Open the door by carefully pulling the door handle outwards.
Daily use 2. If required, pour fabric softener into the compartment marked (the amount used must not exceed the MAX mark in the drawer). Close the drawer gently. Select the required programme by means of programme selector dial (1) You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»). Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g.
Daily use 13 Press the button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up. RINSE HOLD : by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows a blinking , the pilot light 10.
Daily use To interrupt a programme which is running, press the button 8: the corresponding red pilot light starts blinking. To restart the programme from the point at which it was interrupted, press the button 8 again. If you have chosen a delayed start with button 9, the machine will begin the countdown. If an incorrect option is selected, the yellow pilot light of the button 8 blinks for 3 times the message Err is displayed for about 2 seconds.
Changing a running programme is possible only by resetting it. Turn the programme selecand then to the new programme position. Start the new programme by tor dial to pressing the 8 button again. The washing water in the tub will not emptied out. Interrupting a programme Press the button 8 to interrupt a programme which is running, the corresponding light starts blinking. Press the button again to restart the programme. Cancelling a programme Turn the selector dial to new programme.
Helpful hints and tips HELPFUL HINTS AND TIPS Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Before loading the laundry Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash. New coloured items may run in the first wash; they should therefore be washed separately the first time.
Washing programmes 17 The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling. All commonly available washing machine detergents may be used in this appliance: • powder detergents for all types of fabric • powder detergents for delicate fabrics (60°C max) and woollens • liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only.
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options COTTONS WITH PREWASH 95° - Cold Prewash - Main wash - Rinses - Long spin at the maximum speed Max. load 7 kg - Reduced load 3,5 kg White or coloured cottons with prewash phase (heavily soiled items). SPIN REDUCTION RINSE HOLD STAIN1) SENSITIVE TIME SAVING 2) EXTRA RINSE 40 - 60 MIX 40° Main wash - Rinses - Long spin at the maximum sped Max.
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options EASY IRON PLUS 60° - Cold Main wash - Rinses - Short spin at 1200 rpm Max. load 1 kg Synthetic fabrics to be gentle washed and spun. Selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses.
Consumption values Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options SPIN Drain and long spin at the maximum speed Max. load 7 kg Separate spin for hand washed cotton garments and after programmes with the option selected, that ends with water left in the tub. Before selecting this pro. You gramme the selector dial must be turned to can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun.
Care and cleaning Programme Energy consumption (KWh) Water consumption (litres) Cotton Eco 60° 1) 1.19 49 Cottons 40° 0.77 60 Synthetics 40° 0.6 54 Delicates 40° 0.6 63 Wool/ Handwash 30° 0.25 55 21 Programme duration (Minutes) display on the control panel. 1) «Cottons Eco» at 60°C with a load of 7 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards. Off Mode (W) Left On Mode (W) 0.10 0.
Care and cleaning External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Do not use methylated spirits, solvents or similar products to clean the cabinet. Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1. Remove the detergent dispenser drawer by pulling it firmly. 2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4.
Care and cleaning 23 Door seal Check from time to time the door seal and objects that could be trapped in the fold. Drain pump The pump should be inspected regularly and particularly if: • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: 1. Disconnect the appliance. 2. If necessary wait until the water has cooled down. 3. Open the pump door. 4. 5.
Care and cleaning 6. When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump. 7. Remove any objects from the pump impeller by rotating it. 8. Put the cap back on the emergency emptying hose and place the latter back in its seat. 9. Screw the pump fully in. 10. Close the pump door. WARNING! When the appliance is in use and depending on the programme selected there can be hot water in the pump.
Care and cleaning 25 Cleaning the water inlet filters If the appliance doesn't fill, it takes a long time to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked . To clean the water inlet filters: 1. Turn off the water tap. 2. Unscrew the hose from the tap. 3. Clean the filter in the hose with a stiff brush. 4. Screw the hose back onto the tap.
What to do if… Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: 1. pull out the plug from the power socket; 2. close the water tap; 3. if necessary, wait until the water has cooled down; 4. open the pump door; 5. place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Empty the bowl.
What to do if… Problem 27 Possible cause/Solution The washing machine does not start: The door has not been closed. • Close firmly the door. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. • Replace the fuse. The selector dial is not correctly positioned and the button 8 has not been depressed.
What to do if… Problem Possible cause/Solution There is water on the floor: Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. • Check the water inlet hose connection. The drain or the inlet hose is damaged. • Replace it with a new one.
What to do if… Problem 29 Possible cause/Solution The machine vibrates or is noisy: The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support feet have not been adjusted • Check the correct levelling of the appliance. The laundry is not evenly distributed in the drum. • Redistribute the laundry. Maybe there is very little laundry in the drum. • Load more laundry.
Technical data TECHNICAL DATA Dimensions Width / Height / Depth 60 / 85 / 63 mm Electrical connection Voltage Overall power Fuse Frequency 220 V 2200 W 10 A 50 Hz Water supply pressure Minimum Maximum 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Level of protection against ingress of solid particles and moisture IPX4 Water supply 1) Cold water Maximum Load Cotton 7 kg Spin Speed Maximum 1400 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread.
Installation 2. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance. 3. Unscrew the three bolts with the key supplied with the appliance. 4. Slide out the relevant plastic spacers.
Installation 5. Open the porthole and remove the polystyrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating.
Installation 33 Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Water inlet The inlet hose is supplied with the appliance and can be found inside the machine drum. This appliance must be connected to a cold water supply.
Environment concerns This could be done by tying it to the tap with a piece of string or attaching it to the wall. 2. In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. 3. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose.
This means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: • Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!). • The machine works more economically if it is fully loaded.
132950431-A-092013 www.aeg.
