User manual

Off Mode (W) Left On Mode (W)
0.48 0.48
The information given in the chart above is compliant with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC .
7. OPTIONS
7.1 Temp.
With this option you can change the
default temperature.
Indicator = cold water
The indicator of the set temperature
comes on.
7.2 Spin
With this option you can change the
default spin speed.
The indicator of the set speed comes on.
Additional spin options:
• Set this option to deactivate all spin
phases. Only the drain phase is
available.
• The related indicator comes on.
• Set this option for very delicate
fabrics.
• The rinses phase uses more water for
some washing programmes.
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The drum turns regularly to prevent
the laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
To drain the water refer to
‘At the end of the
programme’.
7.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
7.4 Quick
With this option you can decrease the
programme duration.
Use this option for items with daily soil.
The related indicator comes on.
7.5 Super Quick
With this option you can decrease the
programme duration.
Use this option for items with light soil or
items to refresh.
The related indicator comes on.
7.6 Rinse Only
With this option you can perform only a
last rinse of a selected washing
programme.
If you set also the Extra Rinse function
(
) the appliance adds two or more
rinses.
The related indicator comes on.
7.7 Drain & Spin
With this option you can perform the
spin and drain cycle.
The spin phase is suitable to the washing
programme you set.
If you set also the No Spin
option (
) , the appliance
only drains.
ENGLISH 11