User manual

7.8 Finish In
With this option you can set the number
of hours in which you would like your
washing programme to be completed.
You can set from minimum 3 hours to
maximum 20 hours.
The display shows the number of hours
and the indicator above the button
Finish In is on.
7.9 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
1)
8. SETTINGS
8.1 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
To activate/deactivate this option
touch the buttons Spin and Option at
the same time until the indicator
comes on/goes off.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
To activate/deactivate this option,
touch the buttons Temp. and Spin at
the same time until the indicator
comes on/goes off.
Activate this option after you touch the
button Start/Pause : the buttons are
locked (except for the button On/Off ) .
This option stays active even
when you switch off the
appliance.
8.3 Acoustic signals
The acoustic signals operate when:
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic
signals, touch the buttons Programmes
and Temp. at the same time for 4
seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
9. BEFORE FIRST USE
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in
the compartment for washing phase.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
1)
See in "Settings" how to activate this option.
www.aeg.com12