LAVAMAT 69470VFL USER MANUAL DE Benutzerinformation Waschmaschine
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................4 3. GERÄTEBESCHREIBUNG........................................................................................... 6 4. BEDIENFELD................................................................................................................7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com 1.2 Allgemeine Sicherheit • • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Überschreiten Sie nicht die maximale Beladungsmenge von 7 kg (siehe Kapitel „Programmübersicht“). Der Betriebswasserdruck am Wassereinlass der Wasserversorgung muss zwischen 0,5 bar (0,05 MPa) und 8 bar (0,8 MPa) liegen. Die Lüftungsöffnung im Gerätesockel darf nicht von einem Teppich, einer Matte oder einem Bodenbelag blockiert werden.
DEUTSCH • • • • • • • • • • verriegeln und dadurch interne Schäden zu vermeiden. Seien Sie beim Umsetzen des Gerätes vorsichtig, da es sehr schwer ist. Tragen Sie stets Sicherheitshandschuhe und festes Schuhwerk. Montieren Sie ein beschädigtes Gerät nicht und benutzen Sie es nicht. Halten Sie sich an die mitgelieferte Montageanleitung. Stellen Sie das Gerät nicht an einem Ort auf, an dem die Temperatur unter 0 °C absinken kann oder an dem es Witterungseinflüssen frei ausgesetzt ist.
www.aeg.com • Beachten Sie die Sicherheitsanweisungen auf der Waschmittelverpackung. • Laden Sie keine entflammbaren Produkte oder Gegenstände, die mit entflammbaren Produkten benetzt sind, in das Gerät und stellen Sie solche nicht in die Nähe oder auf das Gerät. • Achten Sie darauf, dass alle Metallobjekte aus der Wäsche entfernt wurden. • Waschen Sie keine Textilien, die stark mit Öl, Fett oder anderen fetthaltigen Substanzen verschmutzt sind.
DEUTSCH 3.2 Satz Fixierplatten (4055171146) 7 Lesen Sie die mit dem Zubehör gelieferte Gebrauchsanleitung sorgfältig durch. Erhältlich bei Ihrem autorisierten Händler. Wenn Sie das Gerät auf einem Sockel aufstellen, befestigen Sie es mithilfe der Fixierplatten. 4. BEDIENFELD 4.
www.aeg.com 4.2 Display A. Zeitbereich: • • Fertig In A B D C : Programmdauer : Zeit „Fertig in“ • : Alarmcodes • : Fehlermeldung • : Das Programm ist beendet. B. Anzeige Kindersicherung: • Die Anzeige leuchtet auf, wenn diese Funktion eingeschaltet ist. C. Anzeige Extra Spülen: • Die Anzeige leuchtet auf, wenn diese Funktion eingeschaltet ist. D. Touchpad Fertig In. 5.
DEUTSCH 9 Programm Temperaturbereich Maximale Beladung Maximale Schleuderdrehzahl Programmbeschreibung (Beladung und Verschmutzungsgrad) Mix 20° 20 °C 2 kg 1200 U/min Spezialprogramm für leicht verschmutzte Baumwollwäsche, Synthetik- oder Mischgewebe. Dieses Programm hilft den Energieverbrauch zu senken. Verwenden Sie ein Waschmittel für niedrige Temperaturen, um ein gutes Waschergebnis zu erzielen.
■ ■ ■ ■ ■ Fertig In ■ Extra Kurz 1) ■ Pumpen/Schleudern Leichtbügeln ■ Spülen/Schleudern Mix 20° Spülstop p Kurz1) Programm Ohne Vorwäsche www.aeg.com Schleudern 10 ■ ■ ■ ■ ■ ■ Extra Spülen ■ 1) Wenn Sie diese Option wählen, empfehlen wir Ihnen, die Wäschemenge zu verringern. Eine volle Beladung ist zwar möglich, aber das Waschergebnis ist dann möglicherweise nicht zufriedenstellend. Empfohlene Füllmenge: Baumwolle: 3,5 kg, pflegeleichte und Feinwäsche: 1,5 kg. 5.
DEUTSCH 11 Zu Beginn des Programms zeigt das Display die Programmdauer für die maximale Beladung an. Während der Waschphase wird die Programmdauer automatisch berechnet und verringert sich möglicherweise beträchtlich, wenn die Wäsche weniger wiegt als die maximal zulässige Beladung. (Zum Beispiel beträgt die maximale Beladung bei Baumwolle 60 °C 7 kg und die Programmdauer für dieses Programm beträgt mehr als 2 Stunden. Wiegt die tatsächliche Beladung 1 kg, beträgt die Programmdauer weniger als 1 Stunde).
www.aeg.com 7. OPTIONEN 7.1 Temperatur Mit dieser Option können Sie die Standard-Temperatur ändern. Kontrolllampe Kalt = kaltes Wasser Die Kontrolllampe der eingestellten Temperatur leuchtet auf. 7.2 Schleudern Mit dieser Option können Sie die Standard-Schleuderdrehzahl ändern. Die Kontrolllampe der eingestellten Schleuderdrehzahl leuchtet auf. Zusätzliche Schleuderoptionen: Ohne • Wählen Sie diese Option zum Ausschalten aller Schleudergänge. Nur das Abpumpprogramm ist möglich.
DEUTSCH Diese kann von mindestens 3 bis maximal 20 Stunden eingestellt werden. Das Display zeigt die Anzahl der Stunden an, und die Kontrolllampe über der Taste Fertig In leuchtet. 7.9 Extra Spülen 13 Diese Option empfiehlt sich für Menschen, die unter Waschmittelallergien leiden, und in Gebieten mit weichem Wasser. Die entsprechende Kontrolllampe leuchtet auf.1) Mit dieser Option können Sie dem Waschprogramm Spülgänge hinzufügen. 8. EINSTELLUNGEN 8.
www.aeg.com 10. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 10.1 Einfüllen der Wäsche 1. Öffnen Sie die Gerätetür 2. Schütteln Sie jedes Wäschestück leicht aus, bevor Sie es in das Gerät legen. 3. Geben Sie jedes Wäschestück einzeln in die Trommel. Achten Sie darauf, nicht zu viel Wäsche einzufüllen. 4. Drücken Sie die Tür fest zu. 10.2 Gebrauch von Waschund Pflegemitteln 1. Messen Sie Waschmittel und Weichspüler ab. 2.
DEUTSCH 15 10.4 Flüssigwaschmittel oder Waschpulver 1. 2. A 3. 4. B • Position A für Waschpulver (Werkseinstellung). • Position B für Flüssigwaschmittel. Bei Verwendung von Flüssigwaschmitteln: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Obergrenze. • Stellen Sie nicht die Option Vorwäsche ein. • Stellen Sie keine Zeitvorwahl (oder die Option Fertig in) ein. 10.
www.aeg.com Option leuchtet auf, sobald die Option eingeschaltet wird. Wenn Sie einen Fehler machen, erscheint im Display die Meldung . 10.7 Starten eines Programms ohne die Option Fertig In Berühren Sie die Taste Start/Pause. • Die Kontrolllampe der Taste Start/Pause hört auf zu blinken und leuchtet konstant. • Das Programm startet, die Tür wird verriegelt und die Kontrolllampe leuchtet. • Die Ablaufpumpe kann sich zu Beginn des Waschgangs eine kurze Zeit einschalten.
DEUTSCH Vor dem Start des neuen Programms pumpt das Gerät möglicherweise Wasser ab. Prüfen Sie in diesem Fall, ob sich noch Waschmittel im Fach befindet. Füllen Sie anderenfalls Waschmittel ein. 10.11 Öffnen der Tür Während ein Programm (oder Fertig In) aktiv ist, ist die Tür verriegelt. Die Kontrolllampe leuchtet. VORSICHT! Wenn die Temperatur und der Wasserstand in der Trommel zu hoch sind, lässt sich die Tür nicht öffnen.
www.aeg.com • Sie das Gerät 5 Minuten lang nicht nutzen, bevor Sie Start/Pause berühren. Drücken Sie die Taste Ein/Aus, um das Gerät wieder einzuschalten. • 5 Minuten nach dem Ende des Waschprogramms. Drücken Sie die Taste Ein/Aus, um das Gerät wieder einzuschalten. Im Display wird das Ende des zuletzt eingestellten Programms angezeigt. Berühren Sie die Taste Programme, wenn Sie einen neuen Waschgang einstellen möchten. 11. TIPPS UND HINWEISE 11.1 Beladung 11.
DEUTSCH Dosierkugel (vom Hersteller des Waschmittels). 11.4 Umwelttipps • Stellen Sie zum Waschen normal verschmutzter Wäsche ein Programm ohne Vorwäsche ein. • Waschen Sie immer mit der angegebenen maximal zulässigen Beladung. • Benutzen Sie ggf. einen Fleckentferner, wenn Sie ein Programm mit niedriger Temperatur auswählen. • Erkundigen Sie sich nach der Wasserhärte Ihres Hausanschlusses, um die richtige Waschmittelmenge verwenden zu können. Siehe „Wasserhärte“. 19 11.
www.aeg.com Überprüfen Sie die Türdichtung regelmäßig und entfernen Sie ggf. darin verfangene Gegenstände. 12.5 Reinigen der Waschmittelschublade 1. 2. 3. 4. 12.6 Reinigen des Ablaufsiebs Reinigen Sie das Ablaufsieb nicht, wenn das Wasser im Gerät heiß ist. Kontrollieren Sie regelmäßig das Ablaufpumpensieb und sorgen Sie dafür, dass es sauber ist. Wiederholen Sie die Schritte 2 und 3, bis kein Wasser mehr herausfließt.
DEUTSCH 1. 2. 1 2 3. 4. 2 1 2 5. 6. 7. 8. 1 2 Halten Sie einen Lappen bereit, um verschüttetes Wasser aufzuwischen.
www.aeg.com Prüfen Sie, ob sich das Flügelrad der Pumpe drehen lässt. Ist dies nicht möglich, wenden Sie sich an den autorisierten Kundendienst. Achten Sie auch darauf, dass Sie das Sieb richtig fest anziehen, um Wasserlecks zu vermeiden. 12.7 Reinigen des Siebs des Zulaufschlauchs und Ventils 1. 2. 1 2 3 3. 4. 45° 20° 12.8 Notentleerung Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen.
DEUTSCH 2. Schließen Sie den Wasserhahn. 3. Stecken Sie die beiden Enden des Zulaufschlauchs in einen Behälter und lassen Sie das Wasser aus dem Schlauch fließen. 4. Leeren Sie die Ablaufpumpe. Siehe Notentleerungsverfahren. 5. Befestigen Sie den Zulaufschlauch wieder, wenn die Ablaufpumpe entleert ist. 23 WARNUNG! Stellen Sie sicher, dass die Temperatur über 0 °C liegt, bevor Sie das Gerät wieder einschalten.
www.aeg.com 13.2 Mögliche Störungen Störung Mögliche Abhilfe Das Programm startet nicht. • Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist. • Achten Sie darauf, dass die Gerätetür geschlossen ist. • Vergewissern Sie sich, dass im Sicherungskasten keine Sicherung ausgelöst hat. • Überzeugen Sie sich, dass Start/Pause gedrückt wurde. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie die Zeitvorwahl ab oder warten Sie, bis sie abgelaufen ist.
DEUTSCH 25 Störung Mögliche Abhilfe Das Gerät schleudert nicht oder das Waschprogramm dauert länger als gewöhnlich. • Stellen Sie die Option Schleudern ein. • Haben Sie ein Programm mit Spülstopp gewählt, stellen Sie das Abpumpprogramm ein. • Vergewissern Sie sich, dass das Ablaufsieb nicht verstopft ist. Reinigen Sie ggf. das Sieb. Siehe „Reinigung und Pflege“. • Verteilen Sie die Wäschestücke mit der Hand neu und starten Sie die Schleuderphase erneut.
www.aeg.com Schalten Sie das Gerät nach der Überprüfung wieder ein. Das Programm wird an der Stelle fortgesetzt, an der es unterbrochen wurde. Tritt das Problem erneut auf, wenden Sie sich an den autorisierten Kundendienst. Wenn im Display andere Alarmcodes angezeigt werden. Schalten Sie das Gerät aus und wieder ein. Tritt das Problem weiterhin auf, wenden Sie sich an den autorisierten Kundendienst. 14.
DEUTSCH 27
192963063-A-342017 www.aeg.