DE Benutzerinformation Waschmaschine LAVAMAT 69470VFL
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN.................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................... 4 3. GERÄTEBESCHREIBUNG...............................................................................................6 4. BEDIENFELD................................................................................................................... 6 5.
DEUTSCH 1. 3 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.
www.aeg.com • • • • • • Die Lüftungsöffnungen im Gerätesockel (falls vorhanden) dürfen nicht von einem Teppichboden blockiert werden. Das Gerät muss mit den mitgelieferten neuen Schläuchen an die Wasserversorgung angeschlossen werden. Alte Schläuche dürfen nicht wieder verwendet werden. Wenn das Netzkabel beschädigt ist, muss es vom Hersteller, seinem autorisierten Kundenservice oder einer gleichermaßen qualifizierten Person ausgetauscht werden, um Gefahrenquellen zu vermeiden.
DEUTSCH • Stellen Sie sicher, dass die elektrischen Daten auf dem Typenschild den Daten Ihrer Stromversorgung entsprechen. Wenden Sie sich andernfalls an eine Elektrofachkraft. • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen.
www.aeg.com 3. GERÄTEBESCHREIBUNG 3.1 Geräteübersicht 1 2 3 Arbeitsplatte Waschmittelschublade Bedienfeld Türgriff Typenschild Filter der Ablaufpumpe Schraubfüße zum Ausrichten des Geräts 1 2 3 4 5 6 7 4 5 6 7 4. BEDIENFELD 4.
DEUTSCH 7 4.2 Display A) Zeitbereich: • • Fertig In A B D C : Programmdauer : Zeit „Fertig in“ • : Alarmcodes • : Fehlermeldung • : Das Programm ist beendet. B) Anzeige Kindersicherung: • Die Anzeige leuchtet auf, wenn diese Funktion eingeschaltet ist. C) Anzeige Extra Spülen: • Die Anzeige leuchtet auf, wenn diese Funktion eingeschaltet ist. D) Touchpad Fertig In. 5.
www.aeg.com Programm Temperaturbereich Maximale Beladung Maximale Schleuderdrehzahl Programmbeschreibung (Beladung und Verschmutzungsgrad) Mix 20° 20 °C 2 kg 1200 U/min Spezialprogramm für leicht verschmutzte Baumwollwäsche, Synthetik- oder Mischgewebe. Dieses Programm hilft den Energieverbrauch zu senken.
DEUTSCH 6. VERBRAUCHSWERTE Bei den in dieser Tabelle angegebenen Werten handelt es sich um Richtwerte. Folgende Faktoren können diese Werte verändern: Die Wäscheart und -menge, die Wasser- und Raumtemperatur. Am Programmstart zeigt das Display die Programmdauer für die maximale Beladung an. Während der Waschphase wird die Programmdauer automatisch berechnet und verringert sich möglicherweise beträchtlich, wenn die Wäsche weniger wiegt als die maximal zulässige Beladung.
www.aeg.com Aus-Zustand (W) Ein-Zustand (W) Die in der Tabelle oben enthaltenen Informationen erfüllen die Verordnung (EG) 1015/2010 der Kommission zur Durchführung der Richtlinie EG/2009/125. 7. OPTIONEN 7.1 Temperatur 7.3 Vorwäsche Mit dieser Option können Sie die Standard-Temperatur ändern. Mit dieser Option können Sie dem Waschprogramm einen Vorwaschgang hinzufügen. Kontrolllampe Kalt = kaltes Wasser Die Kontrolllampe der eingestellten Temperatur leuchtet auf.
DEUTSCH Die Schleuderphase wird an das eingestellte Waschprogramm angepasst. Bei eingestellter Option Kein Schleudern (Ohne) wird lediglich das Wasser aus dem Gerät abgepumpt. 7.8 Fertig In Das Display zeigt die Anzahl der Stunden an, und die Kontrolllampe über der Taste Fertig In leuchtet. 7.9 Extra Spülen Mit dieser Option können Sie dem Waschprogramm Spülgänge hinzufügen. Mit dieser Option kann die Anzahl der Stunden eingestellt werden, nach denen das Wachprogramm beendet sein soll.
www.aeg.com 10. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 10.1 Einfüllen der Wäsche 1. Öffnen Sie die Gerätetür 2. Geben Sie jedes Wäschestück einzeln in die Trommel. 3. Schütteln Sie jedes Wäschestück leicht aus, bevor Sie es in das Gerät legen. Achten Sie darauf, nicht zu viel Wäsche einzufüllen. 4. Schließen Sie die Tür. 10.2 Gebrauch von Waschund Pflegemitteln 1. Messen Sie Waschmittel und Weichspüler ab. 2. Schließen Sie die Waschmittelschublade vorsichtig 10.
DEUTSCH 10.4 Flüssigwaschmittel oder Waschpulver Wenn Sie eine Vorwäsche-Option einstellen, geben Sie das Waschmittel für die Vorwäsche direkt in die Trommel. 1. 13 2. A 3. 4. B • Position A für Waschpulver (Werkseinstellung). • Position B für Flüssigwaschmittel. Bei Verwendung von Flüssigwaschmitteln: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Obergrenze.
www.aeg.com Auswahl stehende Optionen hinzu. Die Kontrolllampe der gewählten Option leuchtet auf, sobald die Option eingeschaltet wird. Wenn Sie einen Fehler machen, erscheint im Display die Meldung . 10.7 Starten eines Programms ohne die Option Fertig In Berühren Sie die Taste Start/Pause. • Die Kontrolllampe der Taste Start/Pause hört auf zu blinken und leuchtet konstant. • Das Programm startet, die Tür wird verriegelt und die Kontrolllampe leuchtet.
DEUTSCH Vor dem Start des neuen Programms pumpt das Gerät möglicherweise Wasser ab. Prüfen Sie in diesem Fall, ob sich noch Waschmittel im Fach befindet. Füllen Sie anderenfalls Waschmittel ein. 10.11 Öffnen der Tür Während ein Programm (oder Fertig In) aktiv ist, ist die Tür verriegelt. Die Kontrolllampe leuchtet. ACHTUNG! Wenn die Temperatur und der Wasserstand in der Trommel zu hoch sind, lässt sich die Tür nicht öffnen.
www.aeg.com • Sie das Gerät 5 Minuten lang nicht nutzen, bevor Sie Start/Pause berühren. Drücken Sie die Taste Ein/Aus, um das Gerät wieder einzuschalten. • 5 Minuten nach dem Ende des Waschprogramms. Drücken Sie die Taste Ein/Aus, um das Gerät wieder einzuschalten. Im Display wird das Ende des zuletzt eingestellten Programms angezeigt. Berühren Sie die Taste Programme, wenn Sie einen neuen Waschgang einstellen möchten. 11. TIPPS UND HINWEISE 11.1 Beladung 11.
DEUTSCH Dosierkugel (vom Hersteller des Waschmittels). 11.4 Umwelttipps • Stellen Sie zum Waschen normal verschmutzter Wäsche ein Programm ohne Vorwäsche ein. • Waschen Sie immer mit der angegebenen maximal zulässigen Beladung. • Benutzen Sie ggf. einen Fleckentferner, wenn Sie ein Programm mit niedriger Temperatur auswählen. • Erkundigen Sie sich nach der Wasserhärte Ihres Hausanschlusses, um die richtige Waschmittelmenge verwenden zu können. Siehe „Wasserhärte“. 17 11.
www.aeg.com Überprüfen Sie die Türdichtung regelmäßig und entfernen Sie ggf. darin verfangene Gegenstände. 12.5 Reinigen der Waschmittelschublade 1. 2. 3. 4. 12.6 Reinigen des Ablauffilters WARNUNG! Reinigen Sie den Ablauffilter nicht, wenn das Wasser im Gerät heiß ist. 1. 2.
DEUTSCH 3. 4. 1 5. 2 6. 2 1 7. 8. 2 9.
www.aeg.com 12.7 Reinigen des Zulaufschlauchs und Ventilfilters 1. 2. 1 2 3 3. 4. 45° 20° 12.8 Notentleerung 12.9 Frostschutzmaßnahmen Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. Falls das Gerät in einem Bereich installiert ist, in dem die Temperatur unter 0 °C sinken kann, entfernen Sie das im Zulaufschlauch und in der Ablaufpumpe verbliebene Wasser. In diesem Fall führen Sie die Schritte (1) bis (9) unter „Reinigen des Ablauffilters“ durch.
DEUTSCH 21 WARNUNG! Stellen Sie sicher, dass die Temperatur über 0 °C liegt, bevor Sie das Gerät wieder einschalten. Der Hersteller ist nicht für Schäden verantwortlich, die auf zu niedrige Temperaturen zurückzuführen sind. 13. FEHLERSUCHE WARNUNG! Siehe Kapitel Sicherheitshinweise. 13.1 Einleitung Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zunächst selbst eine Lösung für das Problem zu finden (siehe Tabelle).
www.aeg.com 13.2 Mögliche Störungen Problem Mögliche Abhilfe Das Programm startet nicht. Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist. Vergewissern Sie sich, dass die Tür geschlossen ist. Vergewissern Sie sich, dass im Sicherungskasten keine Sicherung ausgelöst hat. Überzeugen Sie sich, dass Start/Pause gedrückt wurde. Wenn die Zeitvorwahl eingestellt ist, brechen Sie die Zeitvorwahl ab oder warten Sie, bis sie abgelaufen ist.
DEUTSCH Problem 23 Mögliche Abhilfe Haben Sie ein Programm mit Spülstopp gewählt, stellen Sie das Abpumpprogramm ein. Das Gerät schleudert nicht oder das Waschprogramm dauert länger als gewöhnlich. Stellen Sie das Schleuderprogramm ein. Vergewissern Sie sich, dass der Ablauffilter nicht verstopft ist. Reinigen Sie ggf. den Filter. Siehe „Reinigung und Pflege“. Verteilen Sie die Wäschestücke mit der Hand neu und starten Sie die Schleuderphase erneut.
www.aeg.com Problem Mögliche Abhilfe Verringern Sie die Beladung. Sie können keine Option einstellen. Achten Sie darauf, dass Sie nur die gewünschte(n) Taste(n) drücken. Schalten Sie das Gerät nach der Überprüfung wieder ein. Das Programm wird an der Stelle fortgesetzt, an der es unterbrochen wurde. Tritt das Problem erneut auf, wenden Sie sich an den autorisierten Kundendienst. Wenn im Display andere Alarmcodes angezeigt werden. Schalten Sie das Gerät aus und wieder ein.
DEUTSCH 25
www.aeg.
DEUTSCH 27
192963061-A-292015 www.aeg.