L6FB67400 USER MANUAL EN User Manual Washing Machine
www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 3 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................5 4. PRODUCT DESCRIPTION.........................................................................................10 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.aeg.com • • • • • • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
ENGLISH access to the mains plug after the installation. • Do not touch the mains cable or the mains plug with wet hands. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. • This appliance complies with the E.E.C. Directives. 2.3 Water connection • Do not cause damage to the water hoses. • Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.
www.aeg.com Make sure not to damage the hoses. 7. Remove the polystyrene protection from the bottom. 1 3. Remove the cardboard top and the polystyrene packaging materials. 2 8. Fully clean and dry the bottom of the appliance. 4. Open the door and remove the polystyrene piece from the door seal and all the items from the drum. CAUTION! Do not use alcohol, solvents or chemical products. 9. Make sure to identify the different sizes and the positions of the sound barriers. Refer to the illustration: 5.
ENGLISH 12. Refer to the illustration. Make sure that the barriers are securely attached. x4 A B 16. Pull out the plastic spacers. 17. Put the plastic caps, that you find in the user manual bag, in the holes. Attach the sound barriers at a room temperature. 13. Pull up the appliance in vertical position. We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 3.2 Positioning and levelling 14.
www.aeg.com 45 20 O O x4 The appliance must be level and stable. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. 3.3 The inlet hose 1. Connect the water inlet hose to the back of the appliance. 2. Position it toward left or right depending on the position of the water tap. Make sure that the inlet hose is not in vertical position. 3. If necessary, loose the ring nut to set it in the correct position. 4.
ENGLISH A 9 Make sure that the drain hose end is not immersed in the water. There may be a return of dirty water into the appliance. 3. To a stand pipe with vent-hole Insert the drain hose directly into a drain pipe. Refer to the illustration. If this occur, close the water tap and contact the authorized service centre to replace the hose. 3.5 Water drainage The drain hose should stay at a height of not less than 60 cm and not more than 100 cm.
www.aeg.com Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink. 6. Position the hose directly to a built-in drain pipe in the room wall and tighten it with a clip. You can extend the drain hose to maximum 400 cm. Contact the authorized service centre for the other drain hose and the extension. 4. PRODUCT DESCRIPTION 4.
ENGLISH 1 2 3 4 5 6 7 Worktop Detergent dispenser Control panel Door handle Rating plate Drain pump filter Feet for levelling the appliance 8 9 10 11 12 11 Drain hose Inlet hose connection Mains cable Transit bolts Hose support 5. CONTROL PANEL 5.1 Control panel description 3 2 1 Programme Eco Baumwolle Pflegeleicht Feinwäsche Wolle/Seide Anti-Allergie 20 Min. - 3 kg Outdoor Daunen Leichtbügeln Pumpen/Schleudern Temp.
www.aeg.com 5.2 Display MIX Maximum load indicator. The load estimation. indicator flashes during the laundry Door locked indicator. Delay start indicator. The digital indicator can show: ). • Programme duration (e. g. • Delay time (e. g. or ). • Cycle end ( ). • Warning code ( ). Washing phase indicator. It flashes during prewash and wash phase. Rinsing phase indicator. It flashes during rinse phase. The Extra Rinse option. The extra rinse is set .
ENGLISH 13 Rinse hold indicator. Extra silent indicator. Time saving indicator. 6. KNOB AND BUTTONS 6.1 Ein /Aus 6.4 U./Min. Pressing this button for a few seconds allows to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off. When you set a programme, the appliance automatically sets the maximum spin speed allowed.
www.aeg.com In some programmes the rinses are performed with more water. If you touch the Start/Pause button, the appliance performs the only draining phase. The appliance empties the water out automatically after 18 hours approximately. 6.5 Flecken/Vorw. Press this button repeatedly to activate one of the two options. The relevant indicator goes on in the display.
ENGLISH This option increases slightly the programme duration. 6.10 Zeitvorwahl With this option you can delay the start of a programme in a more convenient time. Touch the button repeatedly to set the required delay. The time increases by steps of 30 minutes up to 90' and from 2 hours up to 20 h. 15 After touching the Start/Pause button, the display shows the indicator and the selected delay time and the appliance begins the countdown. 6.
www.aeg.com Programme Programme description Cotton and synthetic items lightly soiled or once worn. 20 Min. - 3 kg Outdoor Synthetic sport items. This programme is designed to gently wash modern sports clothes such as gym, cycling or jogging clothes and similar outdoor items. The recommended laundry load is 2 kg. To reach better results, do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Waterproof, waterproof-breathable fabrics.
ENGLISH Programme 17 Default tempera- Maximum spin speed Maximum load ture Spin speed range Temperature range Pflegeleicht 40 °C 60 °C - Cold 1200 rpm 1200 rpm - 400 rpm 4 kg Feinwäsche 40 °C 40 °C - Cold 1200 rpm 1200 rpm - 400 rpm 4 kg Wolle/Seide 40 °C 40 °C - Cold 1200 rpm 1200 rpm - 400 rpm 1,5 kg 60 °C 1400 rpm 1400 rpm - 400 rpm 10 kg 20 Min.
Feinwäsche Wolle/Seide Anti-Allergie 20 Min. - 3 kg Outdoor Daunen Leichtbügeln ■ ■ ■ ■ ■ ■ ■ ■ ■ Pumpen/Schleudern Pflegeleicht U./Min. Baumwolle www.aeg.
ENGLISH 19 8. SETTINGS 8.1 Child Lock With this option you can prevent children from playing with the control panel. • To activate/deactivate this option, touch the U./Min. and the Flecken/ Vorw. buttons simultaneously until the indicator comes on/goes off on the display. You can activate this option: • After you touch the Start/Pause button: all the buttons and the programme dial are deactivated (except Ein /Aus button ). • Before you touch the Start/Pause button: the appliance cannot start.
www.aeg.com 2. Shake the items before you put them in the appliance. 3. Put the laundry in the drum, one item at a time. Make sure not to put too much laundry in the drum. 4. Close the door firmly. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing results.
ENGLISH 4. To use liquid detergent, turn the flap down. With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit shown on the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. 21 The indicator of the Start/Pause button flashes.
www.aeg.com Changing the delay start after the countdown has started In this case, for 30 seconds, it is possible to pause the appliance and remove the exceeding garments. To change the delay start: Once removed the exceeding garments, touch the Start/Pause button to start the programme again. The ProSense phase can be repeated up to three times (see point 1). 1. Touch the Start/Pause button to pause the appliance. The related indicator flashes. 2.
ENGLISH 2. Change the options. The given information in the display changes accordingly. 3. Touch the button Start/Pause again. The washing programme continues. 10.11 Cancelling a running programme 1. Press the button Ein /Aus to cancel the programme and to deactivate the appliance. 2. Press the button Ein /Aus again to activate the appliance. Now, you can set a new washing programme.
www.aeg.com 1. If necessary, touch the U./Min. button to decrease the spin speed proposed by the appliance. 2. Touch the Start/Pause button: • If you have set , the appliance drains the water and spins. • If you have set , the appliance only drains the water. The option indicator or goes out, while the indicator flashes and then goes off. 3. When the programme is completed and the door locked indicator goes off, you can open the door. 4.
ENGLISH 11.2 Stubborn stains • Use the recommended detergents for the type and colour of the fabric, the programme temperature and the level of soil. For some stains, water and detergent is not sufficient. We recommend that you pre-treat these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. 11.
www.aeg.com The regular detergents already contain water softening agents, but we recommend to run a cycle with empty drum and a descaling product occasionally. Always follow the instructions that you find on the packaging of the product. 12.3 Maintenance wash With the low temperature programmes it is possible that some detergent stays in the drum. Perform a maintenance wash regularly. To do this: • Remove all laundry from the drum.
ENGLISH 27 WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down Proceed as follows to clean the pump: 4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum. 1. Open the pump cover. 2 1 12.7 Cleaning the drain pump 2. Place a suitable bowl below the drain pump access to collect the water that flows out. 3.
www.aeg.com 5. When the bowl is full of water, close the drainage duct back and empty the container. 6. Repeat the steps 4 and 5 until the water stops to flowing out. 2 1 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 7. Close the drainage duct and turn the filter anti-clockwise to remove it. 2 1 2 1 12. Close the pump access. 8. If it is necessary, remove fluff and objects from the filter recess. 9.
ENGLISH 29 12.8 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter. 45° 20° 1 12.9 Emergency drain 2 3 2. Remove the inlet hose from the appliance by loosening the ring nut. If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain filter' paragraph.
www.aeg.com 13. TROUBLESHOOTING WARNING! Refer to Safety chapters. 13.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. In case of major problems, the acoustic signals operate, the display shows an alarm code and the Start/Pause button may flash continuously: • - The appliance does not fill with water properly.
ENGLISH Problem The appliance does not fill with water properly. 31 Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged. • Make sure that the inlet hose has no kinks, damages or bends. • Make sure that the connection of the water inlet hose is correct.
www.aeg.com Problem Possible solution The appliance makes an unusual noise and vibrates. • Make sure the levelling of the appliance is correct. Refer to "Installation instruction". • Make sure that the packaging and/or the transit bolts are removed. Refer to "Installation instruction". • Add more laundry in the drum. The load may be too small.
ENGLISH Programmes Load (kg) 33 Energy Water Approxi- Remainconsump- consump- mate pro- ing moistion (kWh) tion (litre) gramme ture (%)1) duration (minutes) Baumwolle 60°C 10 1,80 85 230 52 Baumwolle 40°C 10 1,20 85 220 52 Pflegeleicht 40°C 4 0,80 60 150 35 Feinwäsche 40°C 4 0,55 65 95 35 Wolle/Seide 30°C 1,5 0,40 60 75 30 Standard 60°C cotton 10 0,94 57 263 52 Standard 60°C cotton 5 0,52 46 245 52 Standard 40°C cotton 5 0,52 46 243 52 Standard cotton pro
www.aeg.com Energy Efficiency Class Spin Speed A+++ -30% Maximum 1400 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 16. ACCESSORIES 16.1 Available in www.aeg.com/shop or from authorised dealer Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 16.2 Fixing plate kit If you install the appliance on a plinth, secure the appliance in the fixing plates.
ENGLISH your local recycling facility or contact your municipal office.
192943510-A-222017 www.aeg.
