L6FBG941 USER MANUAL IT Istruzioni per l’uso Lavabiancheria
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA.................................................................................3 2. ISTRUZIONI DI SICUREZZA........................................................................................ 4 3. INSTALLAZIONE..........................................................................................................6 4. DESCRIZIONE DEL PRODOTTO............................................................................. 10 5. PANNELLO DEI COMANDI......
ITALIANO 1. 3 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com • • • • • • • • • • Non superare il volume di carico massimo di 9 kg (consultare il capitolo “Tabella dei programmi”). La pressione di funzionamento dell'acqua nel punto di ingresso dal collegamento esterno deve essere compresa fra 0.5 bar (0.05 MPa) e 8 bar (0.8 MPa). Le aperture di ventilazione alla base non devono essere coperte da un tappeto, da una moquette o da eventuali rivestimenti per pavimenti.
ITALIANO • Attenersi alle istruzioni fornite insieme all'apparecchiatura. • Non installare o utilizzare l'apparecchiatura in ambienti in cui la temperatura è al di sotto di 0°C o all'aperto. • L'area di pavimento dove sarà installata l'apparecchiatura deve essere piana, stabile, resistente al calore e pulita. • Accertarsi che l'aria circoli liberamente tra l'apparecchiatura e il pavimento. • Non installare l'apparecchiatura direttamente sullo scarico a pavimento.
www.aeg.com 2.5 Assistenza Tecnica • Per riparare l'apparecchiatura contattare il Centro di Assistenza Autorizzato. • Utilizzare esclusivamente ricambi originali. 2.6 Smaltimento AVVERTENZA! Rischio di lesioni o soffocamento. • Staccare la spina dall'alimentazione elettrica e idrica. • Tagliare il cavo elettrico dell'apparecchiatura e smaltirlo. • Togliere il blocco porta per evitare che bambini o animali restino intrappolati nel cestello.
ITALIANO 5. Sistemare il lato posteriore dell’apparecchiatura sul polistirolo, facendo attenzione. 6. Appoggiare l'elemento frontale in polistirolo sul pavimento, sotto all'apparecchiatura. 7 A B Assicurarsi di non danneggiare i tubi. 7. Togliere la protezione di polistirolo dal fondo. 1 • A (ANTERIORE) = Parte anteriore dell'apparecchiatura • B (POSTERIORE) = Parte posteriore dell'apparecchiatura 10. Togliere la striscia adesiva dalle barriere insonorizzanti. 11.
www.aeg.com 14. Staccare il cavo di alimentazione e il tubo di scarico dagli appositi supporti. Si può vedere dell'acqua fuoriuscire dal tubo di scarico. Questa condizione è imputabile alle prove con acqua eseguite sulle apparecchiature in fabbrica. 15. Togliere i tre dadi con la chiave fornita insieme al dispositivo. 16. Estrarre i distanziatori in plastica. 17. Mettere nei fori i cappucci in plastica contenuti nel sacchetto del manuale. 3.2 Posizionamento e livellamento 1.
ITALIANO 3.3 Tubo di carico 3.4 Scarico dell'acqua 1. Collegare il tubo di ingresso dell'acqua sulla parte posteriore dell'apparecchiatura. 2. Posizionarlo a sinistra o destra, a seconda della posizione del rubinetto. Il tubo di scarico dovrebbe trovarsi a un'altezza non inferiore a 60 cm e non superiore a 100 cm. 9 È possibile prolungare il tubo di scarico fino a un massimo di 400 cm. Contattare il Centro Assistenza autorizzato per l'altro tubo di scarico e la prolunga.
www.aeg.com conduttura di scarico. Fare riferimento all'immagine. L'estremità del tubo di scarico deve essere sempre ventilata, perciò il diametro interno del condotto di scarico (min. 38 mm = min. 1,5”) deve essere più grande del diametro esterno del tubo di scarico. 4. Se l'estremità del tubo di scarico è questa (vedere il disegno), è possibile inserirla direttamente nel tubo fisso. 5.
ITALIANO Leggere attentamente le istruzioni fornite con l'accessorio. 4.
www.aeg.com 5. PANNELLO DEI COMANDI 5.1 Descrizione del pannello dei comandi 3 2 1 Eco 4 5 12 1 Selettore dei programmi 2 Visualizza 3 Eco Tasto a sfioramento 4 Tasto a sfioramento Risparmio Tempo 5 Risciacquo tasto a sfioramento • opzione Extra Risciacquo • Salto della fase di lavaggio Solo Risciacquo 6 Tasto a sfioramento Avvio/Pausa 7 Macchie/Prelavaggio Tasto a sfioramento 5.
ITALIANO Spia carico massimo. L'indicatore carico del bucato. 13 lampeggia durante la stima del Spia oblò bloccato. Spia della partenza ritardata. La spia digitale può mostrare: • Durata del programma (ad esempio • Tempo di ritardo (ad esempio ). oppure ). • fine del Ciclo ( ). • Codice di avvertenza ( ). Spia fase di lavaggio. Lampeggia durante il pre-lavaggio e durante la fase di lavaggio. Spia fase di risciacquo. Lampeggia durante la fase di risciacquo. L'Opzione Extra risciacquo.
www.aeg.com Per ulteriori dettagli rimandiamo al paragrafo Stand-by nel capitolo Utilizzo quotidiano. 6.2 Introduzione Le opzioni/funzioni non sono selezionabili con tutti i programmi di lavaggio. Controllare la compatibilità fra opzioni/funzioni e i programmi di lavaggio nella "Tabella dei programmi". Un’opzione/funzione può escludere l’altra, in questo caso l’apparecchiatura non consente di impostare congiuntamente le opzioni/ funzioni incompatibili. 6.3 Temp.
ITALIANO Questa opzione non è utilizzabile con temperature inferiori a 40 °C. • Prelavaggio Usare questa funzione per aggiungere una fase di pre-lavaggio a 30°C prima di quella di lavaggio. Questa opzione è consigliata per bucato molto sporco, in particolare se contiene sabbia, polvere, fango e altre componenti solide. Queste opzioni possono aumentare la durata del programma. 6.
www.aeg.com 6.11 Avvio/Pausa Toccare il tasto Avvio/Pausa per avviare, mettere in pausa l'apparecchiatura o interrompere un programma in funzione. 7. PROGRAMMI 7.1 Tabella dei programmi Programmi di lavaggio. Programma Descrizione programma Programmi di lavaggio. Cotoni Cotone bianco e colorato. Sporco normale e leggero. Programmi standard per i valori di consumo dell'etichetta energetica.
ITALIANO Programma Outdoor 17 Descrizione programma Non usare ammorbidente e fare in modo che non vi siano residui di ammorbidente nel cassetto del detersivo. Capi sportivi in tessuti sintetici. Questo programma è stato pensato per lavare in modo delicato indumenti sportivi ed è anche adatto per abbigliamento sportivo come ad esempio vestiti da palestra, ciclismo, jogging e articoli simili. Il carico di bucato consigliato è 2,5 kg.
www.aeg.com Programma Temperatura predefinita Gamma di temperatura Velocità massima di Carico massimo centrifuga Gamma velocità centrifuga Sintetici 40 °C 60 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 3 kg Delicati 40 °C 40 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 3 kg Lana/Seta 40 °C 40 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 1,5 kg Anti-Allergie 60 °C 1400 giri/minuto 1400 giri/min - 400 giri/min 9 kg 20 min.
ITALIANO 19 Cotoni Sintetici Delicati Lana/Seta Anti-Allergie 20 min. - 3 kg Outdoor Piumoni Sport Centrifuga/Scarico Fasi del programma Compatibilità opzioni programma ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Opzioni Giri/Min.
www.aeg.com 7.2 Woolmark Apparel Care Blu Woolmark Company per lavare indumenti di lana con etichetta riportante la dicitura “lavaggio a mano” a patto che i capi vengano lavati seguendo le istruzioni riportate dal produttore della lavabiancheria. Per ulteriori istruzioni sull'asciugatura e sulla biancheria fare riferimento all'etichetta. M1512 Nel Regno Unito, Eire, Hong Kong e India, il simbolo Woolmark è un marchio di certificazione.
ITALIANO temperatura senza carico all'interno del cesto. In questo modo si rimuoveranno eventuali residui di lavorazione dal cesto e dalla vasca. 10. UTILIZZO QUOTIDIANO AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 10.1 Attivazione dell'apparecchiatura 1. Inserire la spina nella presa. 2. Aprire il rubinetto dell’acqua. 3. Premere il tasto On/Off per alcuni secondi per attivare l'apparecchiatura. Si sente un breve segnale acustico (se attivato).
www.aeg.com Dopo un ciclo di lavaggio, ove necessario, rimuovere gli eventuali residui di detersivo dal cassetto del detersivo. 10.4 Controllare la posizione dell'inserto 1. Estrarre il cassetto del detersivo fino all'arresto. 2. Abbassare la leva per estrarre il contenitore. 1 2 3. Per utilizzare il detersivo in polvere, ruotare l'inserto verso l'alto. 4. Per utilizzare il detersivo liquido, ruotare l'inserto verso il basso.
ITALIANO programma corrispondente si accende. La spia del tasto Avvio/Pausa lampeggia. Il display mostra il carico massimo dichiarato per il programma, la temperatura predefinita, la velocità di centrifuga massima, le indicazioni sulla fase di lavaggio (ove disponibili) e una durata indicativa del programma. 2. Per modificare la temperatura e/o la velocità di centrifuga, premere i relativi tasti. 3. Qualora lo si desideri, impostare una o più opzioni toccando i relativi tasti.
www.aeg.com Il rilevamento ProSense avviene solo con i programmi di lavaggio completi (quando non è selezionato nessun salto di fase). 10.9 Spie delle fasi del programma Quando il programma parte la spia della fase di funzionamento lampeggia e le spie delle altre fasi sono accese fisse. Ad esempio: la fase di lavaggio o prelavaggio è in funzione: . Quando la fase termina la spia rilevante smette di lampeggiare ed è accesa fissa. La spia fase successiva inizia a lampeggiare.
ITALIANO 2. 3. 4. 5. Quando si accende nuovamente l'apparecchiatura, il display mostra la fine dell'ultimo programma selezionato Ruotare il selettore dei programmi per impostare un nuovo ciclo. Togliere la biancheria dall'apparecchiatura. Assicurarsi che il cesto sia vuoto. Tenere l’oblò e il cassetto del detergente leggermente aperto al fine di evitare la formazione di muffa e cattivi odori. Chiudere il rubinetto dell'acqua. 10.
www.aeg.com • Non lavare insieme capi bianchi e colorati. • Alcuni capi colorati possono scolorire al primo lavaggio. Consigliamo di lavarli separatamente le prime due-tre volte. • Abbottonare le federe e chiudere cerniere, ganci e bottoni. Chiudere le cinture. • Svuotare le tasche e distendere gli indumenti. • Rivoltare i tessuti multi-strato, i capi in lana e quelli con immagini stampate. • Pre-trattare le macchie ostinate. • Lavare le macchie difficili con un detersivo apposito.
ITALIANO Per scoprire il livello di durezza dell'acqua locale contattare l’ente erogatore locale. 27 Utilizzare la quantità corretta di decalcificatore. Attenersi alle istruzioni riportate sulle confezioni del prodotto. 12. PULIZIA E CURA AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 12.1 Pulizia esterna Pulire l'apparecchiatura esclusivamente con acqua tiepida saponata. Asciugare perfettamente tutte le superfici.
www.aeg.com 1. Aprire il cassetto. Premere il blocco verso il basso, come indicato nell'immagine, quindi estrarlo. Avviare il programma di risciacquo senza indumenti all'interno del cesto. 1 2 2. Togliere la parte superiore della vaschetta degli additivi per contribuire alla pulizia, quindi risciaquarla sotto all'acqua calda per eliminare eventuali tracce di detersivo accumulato. Dopo la pulizia, ricollocare la parte superiore in posizione. 12.
ITALIANO 29 6. Ripetere i passaggi 4 e 5 fino a che l'acqua non smette di fuoriuscire. 7. Ruotare il filtro in senso antiorario per estrarlo. 2 1 2. Collocare una ciotola adatta sotto all'accesso della pompa di scarico per raccogliere l'acqua che fuoriesce. 3. Aprire lo scivolo verso il basso. Tenere sempre a portata di mano uno straccio per asciugare l'acqua che potrebbe fuoriuscire quando si toglie il filtro. 4. Ruotare il filtro di 180 gradi in senso anti-orario per aprirlo, senza rimuoverlo.
www.aeg.com 12. Chiudere il coperchio della pompa. 3. Pulire il filtro valvola sul retro dell'apparecchiatura con una spazzola. 2 1 12.8 Pulizia del tubo di carico e del filtro della valvola Consigliamo di pulire i due filtri sul tubo di ingresso e la valvola a intervalli regolari per rimuovere eventuali depositi accumulatisi nel corso del tempo: 4.
ITALIANO 12.10 Precauzioni antigelo Se si installa l’apparecchiatura in un luogo in cui la temperatura può raggiungere valori intorno agli 0°C oppure scendere al di sotto di 0°C, togliere l'acqua residua dal tubo di carico dell'acqua e dalla pompa di scarico. 31 5. Quando la pompa di scarico è vuota, rimontare il tubo di carico. AVVERTENZA! Accertarsi che la temperatura sia superiore a 0°C prima di utilizzare nuovamente l'apparecchiatura.
www.aeg.com AVVERTENZA! Scollegare la spina dalla presa di corrente prima di eseguire qualsiasi controllo. 13.2 Possibili guasti Problema Possibile soluzione Il programma non si avvia. • Verificare che la spina sia collegata alla presa elettrica. • Controllare che l’oblò dell’apparecchiatura sia chiuso. • Assicurarsi che il fusibile all'interno del quadro elettrico non sia danneggiato. • Assicurarsi di aver premuto il tasto Avvio/Pausa.
ITALIANO Problema 33 Possibile soluzione • Assicurarsi che i raccordi dei tubi dell'acqua siano serrati e non vi siano perdite d'acqua. Presenza di acqua sul pa- • Verificare che i tubi di carico e scarico dell'acqua non siano vimento. danneggiati. • Assicurarsi di utilizzare il detersivo adeguato e la giusta quantità. Non è possibile aprire l'oblò. • Verificare che sia stato selezionato un programma di lavaggio che si conclude con l'acqua nella vasca.
www.aeg.com Una volta effettuati questi controlli, attivare l’apparecchiatura. Il programma riprende dal punto in cui era stato interrotto. In caso di ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. Se il display mostra altri codici di allarme. Attivare e disattivare l'apparecchiatura. In caso di ricomparsa dell'anomalia, contattare il Centro di Assistenza Autorizzato. 14.
ITALIANO Modalità Acceso (W) 35 0.30 Le informazioni riportate nel grafico qui sopra sono in conformità con la direttiva della Commissione Europea 1015/2010 che implementa la direttiva 2009/125/CE 15. DATI TECNICI Dimensione Larghezza/Altezza/ Profondità/Profondità totale 600 mm/ 850 mm/ 630 mm/ 660 mm Collegamento elettrico Tensione Potenza totale Fusibile Frequenza 230 V 2.
www.aeg.com 16.2 Kit di installazione in colonna soltanto utilizzando l'appropriato kit di installazione in colonna prodotto ed approvato da AEG. Verificare il kit di impilatura compatibile controllando la profondità delle proprie apparecchiature. Il kit di installazione in colonna può essere usato solo con le apparecchiature indicate nel libretto fornito con l'accessorio. Leggere attentamente le istruzioni fornite con l'apparecchiatura e con l'accessorio.
ITALIANO 37
www.aeg.
ITALIANO 39
192947092-A-222017 www.aeg.