L6FBI821 USER MANUAL IT Istruzioni per l’uso Lavabiancheria
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA.................................................................................3 2. ISTRUZIONI DI SICUREZZA........................................................................................ 4 3. INSTALLAZIONE..........................................................................................................6 4. DESCRIZIONE DEL PRODOTTO............................................................................. 10 5. PANNELLO DEI COMANDI......
ITALIANO 1. 3 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com • • • • • • • • • • Non superare il volume di carico massimo di 8 kg (consultare il capitolo “Tabella dei programmi”). La pressione di funzionamento dell'acqua nel punto di ingresso dal collegamento esterno deve essere compresa fra 0.5 bar (0.05 MPa) e 8 bar (0.8 MPa). Le aperture di ventilazione alla base non devono essere coperte da un tappeto, da una moquette o da eventuali rivestimenti per pavimenti.
ITALIANO • Attenersi alle istruzioni fornite insieme all'apparecchiatura. • Non installare o utilizzare l'apparecchiatura in ambienti in cui la temperatura è al di sotto di 0°C o all'aperto. • L'area di pavimento dove sarà installata l'apparecchiatura deve essere piana, stabile, resistente al calore e pulita. • Accertarsi che l'aria circoli liberamente tra l'apparecchiatura e il pavimento. • Non installare l'apparecchiatura direttamente sullo scarico a pavimento.
www.aeg.com 2.5 Assistenza Tecnica • Per riparare l'apparecchiatura contattare il Centro di Assistenza Autorizzato. • Utilizzare esclusivamente ricambi originali. 2.6 Smaltimento AVVERTENZA! Rischio di lesioni o soffocamento. • Staccare la spina dall'alimentazione elettrica e idrica. • Tagliare il cavo elettrico dell'apparecchiatura e smaltirlo. • Togliere il blocco porta per evitare che bambini o animali restino intrappolati nel cestello.
ITALIANO 5. Sistemare il lato posteriore dell’apparecchiatura sul polistirolo, facendo attenzione. 6. Appoggiare l'elemento frontale in polistirolo sul pavimento, sotto all'apparecchiatura. Assicurarsi di non danneggiare i tubi. 7. Togliere la protezione di polistirolo dal fondo. 7 Si può vedere dell'acqua fuoriuscire dal tubo di scarico. Questa condizione è imputabile alle prove con acqua eseguite sulle apparecchiature in fabbrica. 10. Togliere i tre dadi con la chiave fornita insieme al dispositivo.
www.aeg.com 3.3 Tubo di carico 3.2 Posizionamento e livellamento 1. Installare l'apparecchiatura su un pavimento piano e solido. Accertarsi che la moquette non impedisca la circolazione dell'aria sotto l'apparecchiatura. Assicurarsi che l'apparecchiatura non tocchi la parete o altre unità. 2. Allentare o stringere i piedini per regolare il livello. AVVERTENZA! Non mettere cartone, legno o materiali equivalenti sotto i piedini dell'apparecchiatura per regolarne il livello. 1.
ITALIANO 3.4 Dispositivo di blocco perdite Il tubo di carico dell'acqua dispone di un dispositivo di blocco perdite. Questo dispositivo impedisce le perdite d'acqua nel tubo da ascrivere al naturale invecchiamento dello stesso. Accertarsi che la guida in plastica non si muova durante lo scarico dell'apparecchiatura. Il settore rosso nella finestra "A" mostra questo problema. A In tal caso, chiudere il rubinetto dell'acqua e contattare il Centro di Assistenza autorizzato per sostituire il tubo. 3.
www.aeg.com Accertarsi che il tubo di scarico formi una curva per evitare che particelle passino dal lavandino all'apparecchiatura. 6. Posizionare il tubo direttamente in una conduttura di scarico incassata nel muro del localee serrare con una pinza. 5. Senza la guida del tubo flessibile in plastica, verso il sifone di un lavandino - Fissare il tubo al sifone, e serrarlo con una pinza. Fare riferimento all'immagine. 4. DESCRIZIONE DEL PRODOTTO 4.
ITALIANO 11 4.2 Panoramica dell'apparecchiatura 1 2 9 8 3 10 4 5 11 12 6 7 1 2 3 4 5 6 7 Piano di lavoro Erogatore del detersivo Pannello comandi Maniglia dell'oblò Targhetta dei dati Filtro della pompa di scarico Per mettere in piano l'elettrodomestico 8 9 10 11 12 Tubo di scarico Collegamento tubo di ingresso Cavo di alimentazione Bulloni per il trasporto Supporto tubo 5. PANNELLO DEI COMANDI 5.
www.aeg.com 1 Selettore dei programmi 2 Display 3 Tasto a sfioramento Partenza Ritardata 4 Tasto a sfioramento Risparmio Tempo 5 Tasto a sfioramento Avvio/Pausa 6 Tasto a sfioramento Opzione • opzione Macchie • opzione Prelavaggio • opzione Solo Risciacquo 7 Giri/Min. tasto a sfioramento riduzione • opzione • opzione 8 Temp.°C tasto a sfioramento 9 On/Off premere il pulsante 5.
ITALIANO Quando la funzione Stand-by disattiva automaticamente l'apparecchiatura per ridurre il consumo energetico, in alcuni casi potrebbe essere necessario attivare nuovamente l'apparecchiatura. Per ulteriori dettagli rimandiamo al paragrafo Stand-by nel capitolo Utilizzo quotidiano. 6.2 Introduzione Le opzioni/funzioni non sono selezionabili con tutti i programmi di lavaggio. Controllare la compatibilità fra opzioni/funzioni e i programmi di lavaggio nella "Tabella dei programmi".
www.aeg.com contiene sabbia, polvere, fango e altre componenti solide. Questa opzione può aumentare la durata del programma. • Solo Risciacquo L'apparecchiatura esegue solo la fase di risciacquo, centrifuga e scarico del programma selezionato. La spia corrispondente si accende. 6.6 Partenza Ritardata Con questa opzione sarà possibile ritardare l'avvio di un programma a un momento più comodo. Toccare ripetutamente il tasto per impostare il ritardo necessario.
ITALIANO Programma Descrizione programma Delicati Tessuti delicati quali ad esempio acrilico, viscosa e tessuti misti che richiedono un lavaggio delicato. Sporco normale. 15 Lana lavabile a macchina, e altri tessuti con simbolo "lavagLana/Seta gio a mano".1). 20 min. - 3 kg Capi in cotone e sintetici leggermente sporchi o dopo essere stati indossati. Mix 20° Piumoni Capi misti (in cotone e sintetici)2). Singolo lenzuolo sintetico, indumenti imbottiti, piumini, giacche e indumenti simili.
www.aeg.com Programma Temperatura predefinita Gamma di temperatura Velocità massima di Carico massimo centrifuga Gamma velocità centrifuga Lana/Seta 40 °C 40 °C - A freddo 1200 giri/minuto 1200 giri/min -800 giri/min 20 min.
■ ■ Prelavaggio ■ ■ ■ ■ Solo Risciacquo ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Extra Risciacquo Risparmio Tempo2) Partenza Ritardata ■ ■ ■ ■ ■ ■ ■ Sport Delicati ■ Piumoni Sintetici ■ Mix 20° Cotoni Eco Macchie 1) Lana/Seta Cotoni 20 min. - 3 kg Fasi del programma 17 Centrifuga/Scarico ITALIANO ■ ■ ■ ■ ■ ■ ■ 1) Questa opzione non è utilizzabile con temperature inferiori a 40 °C.
www.aeg.com programmi sono disattivati (eccetto il tasto On/Off). • Prima di sfiorare il pulsante Avvio/ Pausa: non è possibile avviare l'apparecchiatura. L'apparecchiatura mantiene la selezione di questa opzione dopo lo spegnimento. 8.2 Segnali acustici Il programma è completato al suono dei segnali acustici (sequenza di suoni per circa 2 minuti). 8.3 Extra Risciacquo Permanente Con questa opzione è possibile fare un risciacquo extra quando viene impostato un nuovo programma.
ITALIANO 19 Attenersi sempre alle istruzioni presenti sulla confezione dei detersivi; consigliamo tuttavia di non superare il livello massimo indicato ( ). Questa quantità garantirà comunque risultati di lavaggio ottimali. ATTENZIONE! Assicurarsi che non vi sia della biancheria tra la guarnizione e l’oblò. Sussiste il rischio di perdite di acqua o di arrecare danno alla biancheria. 10.
www.aeg.com 4. Per utilizzare il detersivo liquido, ruotare l'inserto verso il basso. Con l'inserto in posizione ABBASSATA: • Non utilizzare detersivi in gel o densi. • Non versare il detersivo liquido oltre il limite indicato sull'inserto. • Non impostare la fase di prelavaggio. • Non impostare la funzione partenza ritardata. 5. Dosare il detersivo e l'ammorbidente. 6. Chiudere accuratamente il cassetto del detersivo. lavaggio desiderato. La spia del programma corrispondente si accende.
ITALIANO 1. Sfiorare il tasto Avvio/Pausa per mettere in pausa l'apparecchiatura. La spia corrispondente lampeggia. 2. Toccare ripetutamente il tasto Partenza Ritardata finché il display non mostra il ritardo desiderato. 3. Sfiorare nuovamente il tasto Avvio/ Pausa per avviare il nuovo conto alla rovescia. 10.7 Avvio di un programma Toccare il tasto Avvio/Pausa per avviare il programma. La spia corrispondente smette di lampeggiare e rimane accesa. Il programma si avvia, l'oblò si blocca.
www.aeg.com 10.12 Termine del programma Appena il programma è completato, l'apparecchiatura si ferma automaticamente. Se attivi, vengono emessi dei segnali acustici. Nel display tutte le spie della fase di lavaggio diventano fisse e viene visualizzata la zona tempo . La spia del tasto Avvio/Pausa si spegne. L'oblò si sblocca e la spia dell'oblò bloccato si spegne. 1. Premere il pulsante On/Off per disattivare l’apparecchiatura.
ITALIANO 23 11. CONSIGLI E SUGGERIMENTI UTILI AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 11.1 Il carico di biancheria • Suddividere la biancheria in: bianchi, colorati, sintetici, delicati e lana. • Attenersi alle istruzioni di lavaggio indicate nelle etichette dei capi. • Non lavare insieme capi bianchi e colorati. • Alcuni capi colorati possono scolorire al primo lavaggio. Consigliamo di lavarli separatamente le prime due-tre volte.
www.aeg.com • Per usare la quantità corretta di detersivo, verificare la durezza dell’acqua dell'impianto domestico. Fare riferimento a "Durezza dell'acqua". 11.5 Durezza acqua Se la durezza dell'acqua locale è alta o moderata, consigliamo di usare un decalcificatore dell’acqua per lavabiancheria. Nelle zone in cui l'acqua è dolce non è necessario usare un decalcificatore dell’acqua. Per scoprire il livello di durezza dell'acqua locale contattare l’ente erogatore locale.
ITALIANO Attenersi sempre alle istruzioni riportate sulle confezioni dei prodotti. 2. Eseguire il Programma Cotone breve ad alta temperatura o usare, se disponibile, il programma Pulizia. Aggiungere una piccola quantità di detersivo in polvere nel cesto vuoto per risciacquare tutti i residui rimasti. 25 3. Verificare che tutti i residui di detersivo vengano rimossi dalla parte superiore e inferiore dell'incasso. Servirsi di una spazzola piccola per pulire l'incasso. 12.
www.aeg.com AVVERTENZA! • Non togliere il filtro durante il funzionamento dell'apparecchiatura. • Non pulire la pompa se l'acqua presente nell'apparecchiatura è calda. Attendere che l'acqua si raffreddi. Procedere come segue per effettuare la pulizia della pompa: 1. Aprire il coperchio della pompa. 2 5. Quando la ciotola è piena di acqua, capovolgere il filtro e svuotare il contenitore. 6. Ripetere i passaggi 4 e 5 fino a che l'acqua non smette di fuoriuscire. 7.
ITALIANO 27 1 2 3 11. Ricollocare il filtro nelle guide speciali ruotandolo in senso orario. Accertarsi di chiudere correttamente il filtro per evitare perdite. 12. Chiudere il coperchio della pompa. 2. Togliere il tubo di ingresso dall'apparecchiatura allentato il dado dell'anello. 3. Pulire il filtro valvola sul retro dell'apparecchiatura con una spazzola. 2 1 12.
www.aeg.com togliere l'acqua residua dal tubo di carico dell'acqua e dalla pompa di scarico. 45° 20° 12.9 Scarico di emergenza 1. Scollegare la spina dalla presa di corrente. 2. Chiudere il rubinetto dell'acqua. 3. Sistemare le due estremità del tubo di carico in un contenitore e lasciare che l'acqua fluisca fuori dal tubo. 4. Svuotare la pompa di scarico. Fare riferimento alla procedura per lo scarico di emergenza. 5. Quando la pompa di scarico è vuota, rimontare il tubo di carico.
ITALIANO • - La tensione è instabile. Attendere che si stabilizzi. • - Nessuna comunicazione tra gli elementi elettronici dell'apparecchiatura. Spegnerla e riaccenderla. • - Il dispositivo antiallagamento è attivo. Scollegare l'apparecchiatura 29 e chiudere il rubinetto dell'acqua. Contattare il Centro di Assistenza autorizzato. AVVERTENZA! Scollegare la spina dalla presa di corrente prima di eseguire qualsiasi controllo. 13.
www.aeg.com Problema Possibile soluzione • Impostare il programma di centrifuga. • Controllare che il filtro di scarico non sia ostruito. Pulire il La fase di centrifuga non filtro, se necessario. Fare riferimento al capitolo "Pulizia e si avvia o il ciclo di lavagcura". gio dura più a lungo del • Sistemare manualmente i capi nella vasca e riavviare la fase normale. di centrifuga. Il problema può essere legato a problemi di sbilanciamento.
ITALIANO 31 Problema Possibile soluzione Dopo il ciclo di lavaggio ci sono alcuni residui di detersivo del cassetto del detersivo. • Verificare che l'aletta si trovi nella posizione corretta (SU per detersivo in polvere - GIÙ per detersivo liquido). • Verificare di aver utilizzato il cassetto del detersivo in linea con le indicazioni fornite nel presente manuale dell'utente. Una volta effettuati questi controlli, attivare l’apparecchiatura. Il programma riprende dal punto in cui era stato interrotto.
www.aeg.com Programmi Carico (kg) Consumo Consumo di energia d'acqua elettrica (litri) (kWh) Durata in- Umidità dicativa residua del pro(%)1) gramma (minuti) Cotone standard 60°C 4 0,57 40 228 53 Cotone standard 40 °C 4 0,51 40 226 53 1) Al termine della fase di centrifuga. Modalità Spento (W) 0.30 Modalità Acceso (W) 0.
ITALIANO 33 16. ACCESSORI 16.1 Disponibile su www.aeg.com/shop o da un rivenditore autorizzato Solo l'uso di accessori approvati da AEG garantisce la conformità agli standard di sicurezza dell'apparecchiatura. In caso di impiego di ricambi non approvati, i reclami non avranno seguito. 16.2 Kit piastre di fissaggio (4055171146) Disponibile presso il vostro distributore autorizzato. Se si installa l'apparecchiatura su di uno zoccolo, fissarla nelle piastre di fissaggio.
www.aeg.com più vicino o contattare il comune di residenza.
ITALIANO 35
192945231-A-222017 www.aeg.