L6FBI86W FR DE USER MANUAL Notice d'utilisation Lave-linge Benutzerinformation Waschmaschine 2 40
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.................................................................................3 2. CONSIGNES DE SÉCURITÉ........................................................................................5 3. INSTALLATION............................................................................................................6 4. ACCESSOIRES........................................................................................................... 11 5.
FRANÇAIS 3 Sous réserve de modifications. 1. INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com 1.2 Sécurité générale • • • • • • • • • • • • Ne modifiez pas les caractéristiques de cet appareil. Cet appareil est conçu uniquement pour un usage domestique et des situations telles que : – dans des cuisines réservées aux employés dans des magasins, bureaux et autres lieux de travail ; – pour une utilisation privée, par les clients, dans des hôtels et autres lieux de séjour ; – dans les parties communes d'immeubles d'appartements, ou dans les laveries automatiques.
FRANÇAIS 5 agréé par AEG (pour plus d'informations, reportezvous au chapitre « Accessoires - Kit de superposition »). 2. CONSIGNES DE SÉCURITÉ 2.1 Installation L'installation doit être confirme aux réglementations nationales en vigueur. • Retirez l'intégralité de l'emballage et les boulons de transport, y compris le joint en caoutchouc et l'entretoise en plastique. • Conservez les boulons de transport en lieu sûr.
www.aeg.com 2.3 Raccordement à l'arrivée d'eau • Veillez à ne pas endommager les tuyaux de circulation d'eau. • Avant d'installer des tuyaux neufs, des tuyaux n'ayant pas servi depuis longtemps, lorsqu'une réparation a été effectuée ou qu'un nouveau dispositif a été installé (compteurs d'eau, etc.), laissez l'eau s'écouler jusqu'à ce qu'elle soit parfaitement propre et claire. • Pendant et après la première utilisation de l'appareil, vérifiez qu'aucune fuite n'est visible.
FRANÇAIS 7 AVERTISSEMENT! Servez-vous de gants. 1. Utilisez un cutter pour couper le film extérieur. 5. Placez le bloc en polystyrène de l'avant au sol, derrière l'appareil. 6. Couchez avec soin l'appareil sur le dos. 2. Retirez le film externe. 3. Retirez la partie supérieure en carton et tous les matériaux d'emballage en polystyrène. Assurez-vous de ne pas endommager les tuyaux. 7. Retirez la protection en polystyrène en bas de l'appareil. 1 2 4.
www.aeg.com ATTENTION! N'utilisez pas d'alcool, de solvants ni de produits chimiques. 9. Veillez à identifier la taille et l'emplacement des différents isolants acoustiques. Reportez-vous à l'illustration : 14. Retirez le câble d'alimentation électrique et le tuyau de vidange de leurs supports. A B • A (AVANT) = Avant de l'appareil • B (ARRIÈRE) = Arrière de l'appareil 10. Retirez le ruban adhésif des isolants acoustiques. 11. Fixez les quatre isolants au bas de l'appareil. 12.
FRANÇAIS Une mise de niveau correcte évite les vibrations, le bruit ou des déplacements de l'appareil au cours de son fonctionnement. Nous vous recommandons de conserver l'emballage et les boulons de transport en vue d'un éventuel déplacement de l'appareil. Lorsque la machine est installée sur un socle, ou si une lavante-séchante est placée au-dessus du lavelinge, utilisez les accessoires indiqués dans le chapitre « Accessoires ».
www.aeg.com 4. Raccordez le tuyau d'arrivée d'eau à un robinet d'eau froide fileté (3/4 pouce). La longueur maximale du tuyau de vidange est de 400 cm. Contactez le service après-vente agréé pour obtenir d'autres longueurs de tuyaux de vidange et des rallonges. Il est possible de raccorder le tuyau de vidange de différentes façons : 1. Formez un U avec le tuyau de vidange et placez-le autour du guide de tuyau en plastique. ATTENTION! Assurez-vous que les raccords ne fuient pas.
FRANÇAIS 11 5. Sans le guide de tuyau en plastique, vers un siphon d'évier Placez le tuyau de vidange dans le siphon et fixez-le avec une attache. Reportez-vous à l'illustration. L'extrémité du tuyau de vidange doit être ventilée en permanence, c'est-à-dire que le diamètre interne du conduit d’évacuation (minimum 38 mm - min. 1,5 po) doit être supérieur au diamètre externe du tuyau de vidange. 4.
www.aeg.com 4.3 Kit de superposition le kit de superposition adapté, fabriqué et agréé par AEG. Assurez-vous de la compatibilité du kit de superposition en vérifiant la profondeur de vos appareils. Le kit de superposition peut uniquement être utilisé avec les appareils indiqués dans la brochure fournie avec l'accessoire. Lisez attentivement les notices fournies avec l'appareil et avec l'accessoire. AVERTISSEMENT! N'installez pas le sèche-linge sous le lave-linge.
FRANÇAIS 1 2 3 4 5 6 7 Plan de travail Distributeur de produit de lavage Bandeau de commande Poignée d'ouverture du hublot Plaque signalétique (située à l'arrière) Filtre de la pompe de vidange Pieds pour la mise de niveau de l'appareil 8 9 10 11 12 13 Tuyau de vidange Raccord du tuyau d'arrivée d'eau Câble d'alimentation électrique Boulons de transport Support du tuyau 6. BANDEAU DE COMMANDE 6.
www.aeg.com 6.2 Affichage A B A C D E L'indicateur numérique peut afficher : ). • La durée du programme (par ex. • Le départ différé (par ex. ou ). • La fin du cycle ( ). • Un code d'alarme ( ). B Voyant Rinçage plus. Il s'allume lorsque cette option est sélectionnée. C Le voyant de linge. D Voyant Sécurité enfants. E Voyant Hublot verrouillé. 7. MANETTES ET TOUCHES 7.1 Aan /Uit - Marche/Arrêt Appuyez sur cette touche pendant quelques secondes pour allumer et éteindre l'appareil.
FRANÇAIS 7.2 Introduction Les options/fonctions ne sont pas compatibles avec tous les programmes de lavage. Vérifiez la compatibilité entre les options/fonctions et les programmes de lavage dans le « Tableau des programmes ». Une option/ fonction peut en exclure une autre. Dans ce cas, l'appareil ne vous permet pas de sélectionner les options/ fonctions incompatibles. Veillez à ce que l'écran et les touches soient toujours propres et secs. 7.3 Temp.
www.aeg.com Cette option peut rallonger la durée du programme. • Rinçage uniquement L'appareil effectue uniquement les phases de rinçage, d'essorage et de vidange du programme sélectionné. Le voyant correspondant s'allume. Utilisez cette option pour le linge légèrement ou normalement sale, ou à rafraîchir. 7.6 Startuitstel Départ Différé L'indicateur de cette option et l'indicateur de la valeur réglée s'allument.
FRANÇAIS Programme Katoen - Blanc/Couleurs Eco 17 Description du programme Coton blanc et couleur (articles en coton très sales ou normalement sales) Programmes standard pour les valeurs de consommation de l'étiquette énergétique.Conformément à la norme 1061/2010, le programme « Katoen - Blanc/Couleurs à 60 °C et le programme « Katoen - Blanc/Couleurs à 40 °C avec l'option sont respectivement le « programme standard à 60 °C pour le coton » et le « programme standard à 40 °C pour le coton ».
www.aeg.com Programme Machine Clean Description du programme Le cycle de maintenance à l'eau chaude sert à nettoyer et rafraîchir le tambour, ainsi qu'à éliminer les résidus qui pourraient entraîner la formation de mauvaises odeurs. Pour des résultats optimaux, effectuez ce cycle une fois par mois. Avant d'effectuer ce cycle, retirez tous les articles du tambour. Dans le compartiment de la phase de lavage du distributeur de produit de lavage, placez le volet du compartiment vers le haut.
FRANÇAIS Programme Température par défaut Plage de températures Vitesse d'essorage de référence Plage de vitesses d'essorage Wol/Zijde - Laine/Soie 40 °C 40 °C - Froid 1200 tr/min 1200 tr/min 800 tr/min 1,5 kg 20 min.
www.aeg.com Compatibilité des options avec les programmes Katoen - Blanc/Couleurs Katoen - Blanc/Couleurs Eco Synthetica - Synthétiques Fijne Was - Délicats Wol/Zijde - Laine/Soie 20 min.
FRANÇAIS 21 8.2 Woolmark Apparel Care - Bleu Le cycle Laine de cet appareil a été approuvé par la société Woolmark pour le lavage des vêtements en laine portant une étiquette « lavage à la main », sous réserve que les vêtements soient lavés conformément aux instructions du fabricant de ce lave-linge. Consultez l'étiquette d'entretien du vêtement pour plus d'instructions sur le séchage et le lavage. M1511 Le symbole Woolmark est une marque de certification dans de nombreux pays. 9. RÉGLAGES 9.
www.aeg.com la température la plus élevée possible. Cela élimine toute salissure éventuelle du tambour et de la cuve. 11. UTILISATION QUOTIDIENNE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 11.3 Ajout du produit de lavage et des additifs 11.1 Activation de l'appareil 1. Branchez l'appareil sur le secteur. 2. Ouvrez le robinet d'eau. 3. Appuyez sur la touche Aan /Uit Marche/Arrêt pendant quelques secondes pour allumer l'appareil. Un signal court retentit (si activé).
FRANÇAIS 11.4 Vérifiez la position du volet 1. Tirez le distributeur de produit de lavage jusqu'à la butée. 2. Appuyez sur le levier pour faire sortir le distributeur. 1 2 3. Pour utiliser de la lessive en poudre, tournez le volet vers le haut. 4. Pour utiliser de la lessive liquide, tournez le volet vers le bas. 23 Avec le volet en position BASSE : • N'utilisez pas de lessives liquides gélatineuses ou épaisses. • Ne versez pas de lessive liquide audelà du niveau maximal indiqué sur le volet.
www.aeg.com s'affichent et les informations données changent en conséquence. Si votre sélection n'est pas possible, aucun indicateur ne s'affiche et un signal sonore retentit. 11.6 Départ d'un programme avec départ différé Appuyez sur la touche Start/Pauze Départ/Pause. L'appareil démarre le décompte du départ différé. Lorsque le décompte est terminé, le programme démarre. L'estimation de la fonction PROSENSE démarre à la fin du décompte.
FRANÇAIS 3. Appuyez à nouveau sur la touche Start/Pauze Départ/Pause. Le programme de lavage se poursuit. 11.10 Annulation d'un programme en cours 1. Appuyez sur la touche Aan /Uit Marche/Arrêt pour annuler le programme et éteindre l'appareil. 2. Appuyez sur la touche Aan /Uit Marche/Arrêt pour rallumer l'appareil. Maintenant, vous pouvez sélectionner un nouveau programme de lavage.
www.aeg.com 2. Appuyez sur « Start/Pauze Départ/ Pause » pour poursuivre le cycle. 3. Une fois le programme terminé et le voyant de verrouillage du hublot éteint, vous pouvez ouvrir le hublot. 4. Appuyez sur la touche Aan /Uit Marche/Arrêt pendant quelques secondes pour éteindre l'appareil. Dans tous les cas, l'appareil vidange l'eau automatiquement au bout d'environ 18 heures. 11.
FRANÇAIS couleur du textile, pour la température du programme et pour le niveau de salissure. Il est recommandé de pré-traiter ces taches avant de mettre les articles dans l'appareil. Des détachants spéciaux sont disponibles. Utilisez le détachant spécial adapté au type de tache et de textile. 12.
www.aeg.com Examinez régulièrement le tambour à la recherche de tartre. Les produits de lavage habituels contiennent déjà des agents adoucisseurs d'eau, mais nous vous recommandons d'effectuer occasionnellement un cycle de lavage, tambour vide, avec un produit de détartrage. Respectez toujours les instructions figurant sur l'emballage du produit. 13.3 Lavage d'entretien Avec les programmes à basse température, il est possible que certains produits de lavage restent dans le tambour.
FRANÇAIS 29 Vérifiez régulièrement le filtre de la pompe de vidange et assurez-vous qu'il est propre. Nettoyez la pompe de vidange si : • L'appareil ne vidange pas l'eau. • Le tambour ne tourne pas. • L'appareil fait un bruit inhabituel car la pompe de vidange est bloquée. • Le code d'alarme 3. Assurez-vous d'éliminer tous les résidus de lessive dans les parties supérieure et inférieure du logement. Utilisez une petite brosse pour nettoyer les recoins. s'affiche.
www.aeg.com le cas, contactez votre service aprèsvente. 4. Tournez le filtre à 180 degrés vers la gauche pour l'ouvrir, sans le retirer. Laissez l'eau s'écouler. 5. Lorsque le récipient est plein d'eau, remettez le filtre en position et videz le récipient. 6. Répétez les étapes 4 et 5 jusqu'à ce que l'eau cesse de s'écouler. 7. Tournez le filtre vers la fauche pour le retirer. 10. Nettoyez le filtre sous l'eau courante. 11. Replacez le filtre dans les guides spéciaux en le tournant vers la droite.
FRANÇAIS 31 2 1 13.8 Nettoyage du tuyau d'arrivée d'eau et du filtre de la vanne 4. Lorsque vous rebranchez le tuyau à l'arrière de l'appareil, tournez-le vers la gauche ou la droite (et non en position verticale) en fonction de la position du robinet. Il est recommandé de nettoyer occasionnellement les deux filtres du tuyau d'arrivée d'eau et la valve pour éliminer les dépôts accumulés avec le temps : 1. Retirez le tuyau d'arrivée d'eau du robinet et nettoyez le filtre. 45° 1 20° 13.
www.aeg.com 5. Une fois que la pompe de vidange est vide, réinstallez le tuyau d'alimentation. AVERTISSEMENT! Assurez-vous que la température est supérieure à 0 °C avant d'utiliser à nouveau l'appareil. Le fabricant ne pourra être tenu pour responsable en cas de dommages dus aux basses températures. 14. EN CAS D'ANOMALIE DE FONCTIONNEMENT AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 14.1 Introduction L'appareil ne démarre pas ou s'arrête en cours de programme.
FRANÇAIS 33 14.2 Pannes possibles Problème Le programme ne démarre pas. Solution possible • Assurez-vous que la fiche du câble d'alimentation est bien insérée dans la prise de courant. • Vérifiez que le hublot de l'appareil est fermé. • Assurez-vous qu'aucun fusible n'est grillé dans la boîte à fusibles. • Vérifiez que vous avez bien appuyé sur la touche Start/ Pauze Départ/Pause. • Si vous avez sélectionné un départ différé, annulez-le ou attendez la fin du décompte.
www.aeg.com Problème Solution possible Il y a de l'eau sur le sol. • Assurez-vous que les raccords des tuyaux d'eau sont bien serrés et qu'il n'y a aucune fuite d'eau. • Assurez-vous que le tuyau d'arrivée d'eau et le tuyau de vidange ne sont pas endommagés. • Assurez-vous d'utiliser une lessive adaptée en quantité correcte. • Vérifiez si vous avez sélectionné un programme de lavage se terminant avec de l'eau dans la cuve. • Assurez-vous que le programme de lavage est terminé.
FRANÇAIS 35 15. VALEURS DE CONSOMMATION Les valeurs indiquées sont obtenues après des essais en laboratoire, avec les normes correspondantes. Les données peuvent différer pour différentes raisons : la quantité et le type de linge, ou la température ambiante. La pression de l'eau, la tension de l'alimentation et la température de l'arrivée d'eau peuvent également affecter la durée du programme de lavage.
www.aeg.com 16.
FRANÇAIS 3. L'appareil démarre. À la fin du programme, sortez le linge. 37 Appuyez sur la touche Aan /Uit Marche/Arrêt pour éteindre l'appareil. 17.2 Nettoyage du filtre de la pompe de vidange 1 2 3 180˚ 1 2 Nettoyez régulièrement le filtre, tout particulièrement si le code d'alarme s'affiche. 17.3 Programmes Programmes Katoen - Blanc/Couleurs Charge Description de l'appareil 8 kg Coton blanc et couleurs. 8 kg Coton blanc et couleurs.
www.aeg.com 18. FICHE D'INFORMATION PRODUIT EN RÉFÉRENCE AU RÈGLEMENT 1369/2017 DE L'UE Fiche d'information produit Marque AEG Modèle L6FBI86W, PNC914913414 Capacité nominale en kg Classe d'efficacité énergétique 8 A+++ -20% Consommation d’énergie en kWh par an, sur la base de 220 cycles de lavage standard par an pour les programmes coton à 60 °C et à 40 °C à pleine charge et à demicharge, et de la consommation des modes à faible puissance.
FRANÇAIS durée du «programme coton standard à 60 °C» à pleine charge en minutes 290 durée du «programme coton standard à 60 °C» à demicharge en minutes 228 durée du «programme coton standard à 40 °C» à demicharge en minutes 226 durée du mode laissé sur marche en minutes 5 émissions acoustiques dans l’air au cours des phases de lavage en db(A) 50 émissions acoustiques dans l’air au cours des phases d'essorage en db(A) 75 Appareil intégrable O/N 39 Non Les informations fournies dans le tableau
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE........................................................................................... 41 2. SICHERHEITSANWEISUNGEN.................................................................................43 3. MONTAGE................................................................................................................. 45 4. ZUBEHÖR.................................................................................................................
DEUTSCH 41 Änderungen vorbehalten. 1. SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • • Falls Ihr Gerät mit einer Kindersicherung ausgestattet ist, empfehlen wir, diese einzuschalten. Kinder dürfen keine Reinigung und Wartung ohne Beaufsichtigung durchführen. 1.2 Allgemeine Sicherheit • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B.
DEUTSCH • • • 43 Reinigen Sie das Gerät nicht mit einem Wasser- und/ oder Dampfstrahl. Reinigen Sie das Gerät mit einem feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger. Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände. Wird ein Wäschetrockner auf die Waschmaschine gestellt, muss der geeignete, von AEG zugelassene Bausatz Wasch-Trocken-Säule verwendet werden (siehe Abschnitt „Zubehör - Bausatz Wasch-TrockenSäule“). 2.
www.aeg.com • Schließen Sie das Gerät unbedingt an eine ordnungsgemäß installierte Schutzkontaktsteckdose an. • Stellen Sie sicher, dass die Daten auf dem Typenschild mit den elektrischen Nennwerten der Netzspannung übereinstimmen. • Verwenden Sie keine Mehrfachsteckdosen oder Verlängerungskabel. • Achten Sie darauf, Netzstecker und Netzkabel nicht zu beschädigen. Falls das Netzkabel des Geräts ersetzt werden muss, lassen Sie diese Arbeit durch unseren autorisierten Kundendienst durchführen.
DEUTSCH • Schneiden Sie das Netzkabel in der Nähe des Geräts ab, und entsorgen Sie es. • Entfernen Sie das Türschloss, um zu verhindern, dass sich Kinder oder Haustiere in der Trommel einschließen. 45 • Entsorgen Sie das Gerät nach den lokalen Vorschriften zur Rücknahme und Entsorgung von Elektroaltgeräten (WEEE). 3. MONTAGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 3.1 Auspacken WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben.
www.aeg.com 12. Orientieren Sie sich an der Abbildung. Vergewissern Sie sich, dass die Schallschutzteile fest angebracht sind. 1 x4 2 A 8. Reinigen Sie die Unterseite des Geräts und trocknen Sie sie ab. B Bringen Sie die Schallschutzteile bei Raumtemperatur an. 13. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. VORSICHT! Verwenden Sie keinen Alkohol, keine Lösungsmittel und keine Chemikalien. 9. Sortieren Sie die verschiedenen Teile des Schallschutzes nach Größe und Position.
DEUTSCH 47 15. Lösen Sie die drei Schrauben mit dem mitgelieferten Schraubenschlüssel. 16. Ziehen Sie die KunststoffAbstandshalter heraus. 17. Setzen Sie die Kunststoffkappen, die sich im Beutel mit der Bedienungsanleitung befinden, in die Löcher ein. Wir empfehlen, Verpackungsmaterial und Transportschrauben für spätere Transporte aufzubewahren. x4 Das Gerät muss einen waagerechten und festen Stand haben.
www.aeg.com durch natürliche Alterung auftreten können. 45 20 O Der rote Bereich im Fenster „A“ zeigt diesen Fehler an. O A Vergewissern Sie sich, dass sich der Zulaufschlauch nicht in der vertikalen Position befindet. 3. Lösen Sie ggf. die Ringmutter, um ihn in die gewünschte Position zu bringen. 4. Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"Außengewinde an.
DEUTSCH Achten Sie darauf, dass sich das Ende des Ablaufschlauchs nicht im Wasser befindet. Anderenfalls könnte Schmutzwasser in das Gerät zurückfließen. 3. In ein Standrohr mit Belüftungsöffnung - Stecken Sie den Ablaufschlauch direkt in das Ablaufrohr. Orientieren Sie sich an der Abbildung. Das Ende des Ablaufschlauchs muss stets belüftet sein, d. h. der Innendurchmesser des Ablaufrohrs (min. 38 mm min. 1,5") muss größer sein als der Außendurchmesser des Ablaufschlauchs. 4.
www.aeg.com 4. ZUBEHÖR 4.1 Verfügbar im www.aeg.com/shop oder beim Vertragshändler Nur mit geeignetem, von AEG zugelassenem Zubehör können die Sicherheitsstandards des Geräts gewährleistet werden. Werden nicht zugelassene Teile verwendet, erlischt jeglicher Gewährleistungsanspruch. 4.2 Satz Fixierplatten (4055171146) Erhältlich bei Ihrem autorisierten Händler. Wenn Sie das Gerät auf einem Sockel aufstellen, befestigen Sie es mithilfe der Fixierplatten.
DEUTSCH 5. GERÄTEBESCHREIBUNG 5.1 Sonderfunktionen Ihre neue Waschmaschine erfüllt alle modernen Anforderungen an eine effektive und schonende Wäschepflege, bei einem geringen Wasser-, Energieund Waschmittelverbrauch. • Die ProSense-Technologie passt automatisch die Programmdauer an die Wäsche in der Trommel an, um optimale Waschergebnisse in der kürzest möglichen Zeit zu erzielen. 5.
www.aeg.com 6. BEDIENFELD 6.1 Bedienfeldbeschreibung 2 1 Programma/Programme Katoen Blanc/Couleurs 3 Startuitstel Départ Différé Katoen Blanc/Couleurs Eco Synthetica Synthétiques Fijne Was Délicats Wol/Zijde Laine / Soie 20 min. - 3 kg Katoen / Coton 20° Jeans Machine Clean Pompen/Centrifuger en Vidange/Essorage 95° 1600 60° 1200 40° 800 30° Temp.
DEUTSCH A 53 Die Digitalanzeige zeigt Folgendes an: • Programmdauer (z. B. • Zeitvorwahl (z. B. ). oder ). • Programmende ( ). • Fehlercode ( ). B Anzeige Extra Spülen Leuchtet, wenn diese Option ausgewählt ist. C Die Anzeige schemenge. D Kindersicherungsanzeige. E Türverriegelungsanzeige. blinkt während der Messung der Wä- 7. PROGRAMMWAHLSCHALTER UND TASTEN 7.1 Aan /Uit - Marche/Arrêt Halten Sie diese Taste einige Sekunden lang gedrückt, um das Gerät ein- oder auszuschalten.
www.aeg.com 7.4 TPM Geben Sie den Fleckentferner in das Wenn Sie ein Programm auswählen, stellt das Gerät automatisch die höchste Schleuderdrehzahl ein. Fach . Der Fleckentferner wird in der geeigneten Phase des Waschprogramms hinzugefügt. Drücken Sie diese Taste wiederholt, um Die Option Spülstopp einzuschalten • Wählen Sie diese Option, um Knitterfalten zu vermeiden. • Die entsprechende Anzeige leuchtet auf. • Am Programmende befindet sich noch Wasser in der Trommel.
DEUTSCH 55 Wählen Sie diese Option für normal oder leicht verschmutzte oder aufzufrischende Wäschestücke. 7.8 Start/Pauze Départ/Pause Berühren Sie die Taste einmal, um die Dauer zu verkürzen. Berühren Sie die Taste Start/Pauze Départ/Pause, um das Gerät zu starten, anzuhalten oder ein laufendes Programm zu unterbrechen. Berühren Sie die Taste bei geringerer Beladung zweimal, um ein besonders kurzes Programm einzustellen.
www.aeg.com Programm Programmbeschreibung Mischgewebe (Baumwolle und Synthetik)2). Katoen Coton 20° Jeans Machine Clean Kleidungsstücke aus Jeans- und Jerseystoffen. Normal verschmutzt. Das Programm führt einen schonenden Spülgang für Jeans aus, der das Ausbleichen reduziert und Waschmittelrückstände aus den Fasern beseitigt. Wartungszyklus mit Heißwasser zur Reinigung und Auffrischung der Trommel und zum Entfernen von Rückständen, die Gerüche absondern können.
DEUTSCH Programm Standardtemperatur Temperaturbereich Referenzschleuderdrehzahl Schleuderdrehzahlbereich 40 °C 60 °C – kalt 1200 U/min 1200 U/min – 800 U/min 3 kg Fijne Was - Délicats 40 °C 40 °C – kalt 1200 U/min 1200 U/min – 800 U/min 3 kg Wol/Zijde - Laine/Soie 40 °C 40 °C – kalt 1200 U/min 1200 U/min – 800 U/min 1,5 kg 20 min.
www.aeg.com Mögliche Programmkombinationen Katoen - Blanc/Couleurs Katoen - Blanc/Couleurs Eco Synthetica - Synthétiques Fijne Was - Délicats Wol/Zijde - Laine/Soie 20 min.
DEUTSCH 59 8.2 Woolmark Apparel Care - Blau Das Waschprogramm Wolle dieser Maschine wurde von der Firma Woolmark auf das Waschen von Wolltextilien mit der Pflegekennzeichnung „Handwäsche“ getestet und zugelassen, vorausgesetzt, dass die Wäsche gemäß der Anleitung auf dem Kleidungsetikett und gemäß den Angaben des Maschinenherstellers gewaschen wird. Beachten Sie die Trocken- und Waschanleitung auf dem Kleidungsetikett. M1511 Das Woolmark Symbol ist in vielen Ländern ein Zertifizierungszeichen. 9.
www.aeg.com 3. Geben Sie eine kleine Menge Waschmittel in das Fach mit der Markierung . 4. Stellen Sie ein Baumwollprogramm mit der höchsten Temperatur ein und starten Sie das Programm ohne Wäsche. So werden alle eventuellen Verunreinigungen aus Trommel und Bottich entfernt. 11. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 11.1 Einschalten des Geräts 1. Stecken Sie den Netzstecker in die Netzsteckdose. 2. Öffnen Sie den Wasserhahn. 3.
DEUTSCH 61 4. Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Halten Sie sich immer an die Anweisungen auf der Verpackung der Waschmittel. Wir empfehlen Ihnen aber, die Höchstmenge ( ) nicht zu überschreiten. Diese Menge garantiert die besten Waschergebnisse. Entfernen Sie nach dem Waschgang bei Bedarf Waschmittelreste aus der Waschmittelschublade. 11.4 Überprüfen Sie die Position der Klappe 1. Ziehen Sie die Waschmittelschublade bis zum Anschlag heraus. 2.
www.aeg.com 11.5 Einstellen eines Programms Ändern der Zeitvorwahl nach dem Start des Countdowns 1. Drehen Sie den Programmwahlschalter auf das gewünschte Waschprogramm. Die entsprechende Programmanzeige leuchtet auf. Die Kontrolllampe der Taste Start/Pauze Départ/Pause blinkt. Das Display zeigt die voraussichtliche Programmdauer an. 2. Berühren Sie die entsprechenden Tasten, um die Temperatur und/oder Schleuderdrehzahl zu ändern. 3.
DEUTSCH Die ProSense Erkennung wird nur bei vollständigen Waschprogrammen ausgeführt (wenn keine Phase übersprungen wird). 11.9 Unterbrechen eines Programms und Ändern der Optionen Wenn das Programm bereits gestartet wurde, können Sie nur einige der Optionen ändern: 1. Berühren Sie die Taste Start/Pauze Départ/Pause. Die zugehörige Anzeige blinkt. 2. Ändern Sie die Optionen. Die im Display angezeigten Informationen ändern sich entsprechend. 3. Berühren Sie die Taste Start/Pauze Départ/Pause erneut.
www.aeg.com 4. Lassen Sie die Tür und die Waschmittelschublade einen Spaltbreit geöffnet, damit sich kein Schimmel und keine unangenehmen Gerüche bilden. 5. Schließen Sie den Wasserhahn. 11.14 Standby-Option 11.
DEUTSCH • Waschen Sie stark verschmutzte Bereiche mit einem speziellen Waschmittel. • Seien Sie vorsichtig mit Gardinen. Entfernen Sie die Haken, oder stecken Sie die Gardinen in ein Wäschenetz oder einen Kopfkissenbezug. • Waschen Sie keine ungesäumten Wäschestücke und Wäschestücke mit Schnitten im Stoff in der Maschine. • Waschen Sie kleine und/oder empfindliche Wäschestücke (z. B. Bügel-BHs, Gürtel, Strumpfhosen usw.) in einem Wäschenetz.
www.aeg.com 13. REINIGUNG UND PFLEGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 13.1 Reinigen der Außenseiten Reinigen Sie das Gerät nur mit warmem Wasser und etwas milder Seife. Reiben Sie alle Oberflächen sorgfältig trocken. VORSICHT! Verwenden Sie keinen Alkohol, keine Lösungsmittel und keine Chemikalien. • Wählen Sie ein Programm für Baumwollwäsche mit der maximalen Temperatur oder schalten Sie das Programm Machine Clean, falls verfügbar, ein.
DEUTSCH 67 Weichspüler und/oder die Schimmelbildung in der Waschmittelschublade zu vermeiden, führen Sie das folgende Reinigungsverfahren von Zeit zu Zeit durch. 1. Öffnen Sie die Schublade. Drücken Sie die Entriegelung nach unten, siehe Abbildung, und ziehen Sie die Schublade heraus. 1 2 4. Setzen Sie die Waschmittelschublade in die Führungsschienen ein und schließen Sie sie. Starten Sie das Spülprogramm ohne Wäsche in der Trommel. 2.
www.aeg.com WARNUNG! • Entfernen Sie das Sieb nicht, während das Gerät in Betrieb ist. • Reinigen Sie die Ablaufpumpe nicht, wenn das Wasser im Gerät heiß ist. Warten Sie, bis das Wasser abkühlt. Gehen Sie zum Reinigen der Pumpe folgendermaßen vor: 1. Öffnen Sie die Pumpenabdeckung. 2 5. Wenn der Behälter voll ist, drehen Sie das Sieb zurück und leeren Sie den Behälter. 6. Wiederholen Sie die Schritte 4 und 5, bis kein Wasser mehr herausfließt. 7.
DEUTSCH 10. Reinigen Sie das Sieb unter fließendem Wasser. 69 Ablagerungen zu entfernen, die sich mit der Zeit ansammeln. 1. Schrauben Sie den Zulaufschlauch vom Wasserhahn ab und reinigen Sie das Sieb. 1 2 11. Setzen Sie das Sieb wieder in die dafür vorgesehenen Führungen ein und drehen Sie es im Uhrzeigersinn. Achten Sie darauf, dass Sie das Sieb richtig fest anziehen, um Wasserlecks zu vermeiden. 3 2. Lockern Sie die Ringmutter, um den Zulaufschlauch vom Gerät zu entfernen. 2 1 12.
www.aeg.com kann, entfernen Sie das im Zulaufschlauch und in der Ablaufpumpe verbliebene Wasser. 45° 20° 13.9 Notentleerung Kann das Gerät das Wasser nicht abpumpen, führen Sie den unter „Reinigen der Ablaufpumpe“ beschriebenen Vorgang aus. Reinigen Sie bei Bedarf die Pumpe. 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Schließen Sie den Wasserhahn. 3. Stecken Sie die beiden Enden des Zulaufschlauchs in einen Behälter und lassen Sie das Wasser aus dem Schlauch fließen. 4.
DEUTSCH • • - Die Stromzufuhr ist nicht konstant. Warten Sie, bis die Netzspannung wieder konstant ist. 71 - Keine Kommunikation zwischen den elektronischen Bauteilen des Geräts. Schalten Sie das Gerät aus und wieder ein. Das Programm wurde nicht ordnungsgemäß beendet oder der Betrieb zu früh unterbrochen. Erscheint der Fehlercode erneut, wenden Sie sich an den autorisierten Kundendienst. WARNUNG! Schalten Sie das Gerät vor der Überprüfung aus. 14.
www.aeg.com Problem Mögliche Abhilfe Das Gerät pumpt das Wasser nicht ab. • Stellen Sie sicher, dass der Siphon nicht verstopft ist. • Vergewissern Sie sich, dass der Ablaufschlauch nicht geknickt oder zu stark gekrümmt ist. • Vergewissern Sie sich, dass das Ablaufsieb nicht verstopft ist. Reinigen Sie ggf. das Sieb. Siehe „Reinigung und Pflege“. • Vergewissern Sie sich, dass der Wasserablaufschlauch ordnungsgemäß angebracht ist.
DEUTSCH 73 Problem Mögliche Abhilfe Die Programmdauer erhöht oder verringert sich während der Ausführung des Programms. • Die ProSense-Funktion passt die Programmdauer an die Wäscheart und -menge an. Siehe „ ProSense Beladungserkennung“ im Kapitel „Täglicher Gebrauch“. Die Waschergebnisse sind nicht zufriedenstellend. Zu viel Schaum in der Trommel während des Waschprogramms. Nach dem Waschgang befinden sich Waschmittelrückstände in der Waschmittelschublade.
www.aeg.
DEUTSCH Die Schutzverkleidung gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt.
www.aeg.com 17.2 Reinigen des Ablaufpumpensiebs 1 2 3 180˚ 1 2 Reinigen Sie das Sieb regelmäßig und insbesondere, wenn der Fehlercode im Display angezeigt wird. 17.3 Programme Programme Katoen - Blanc/Couleurs Katoen - Blanc/Couleurs Eco Synthetica - Synthétiques Fijne Was - Délicats Wol/Zijde - Laine/Soie Beladung Gerätebeschreibung 8 kg Weiße und bunte Baumwollwäsche. 8 kg Weiße und bunte Baumwollwäsche. Standardprogramme für die auf dem Energielabel angegebenen Verbrauchswerte.
DEUTSCH 18. PRODUKTDATENBLATT GEMÄSS EUVERORDNUNG 1369/2017 Produktdatenblatt Warenzeichen Modell Nennkapazität in kg Energieeffizienzklasse AEG L6FBI86W, PNC914913414 8 A+++ -20% Energierverbrauch in kWh/Jahr auf der Grundlage von 220 Standard-Waschzyklen für 60 °C und 40 °C Baumwollprogramme bei vollständiger Befüllung und Teilbefüllung sowie dem Verbrauchs der Betriebsarten mit geringer Leistungsaufnahme. Der tatsächliche Energieverbrauch hängt von der Art der Nutzung des Geräts ab.
www.aeg.com Programmdauer des Standardprogramms „Baumwolle 60 °C“ bei Teilbefüllung in Minuten 228 Programmdauer des Standardprogramms „Baumwolle 40 °C“ bei Teilbefüllung in Minuten 226 Dauer des unausgeschalteten Zustands in Minuten 5 Luftschallemission in db (A) -Wäsche 50 Luftschallemission in db (A) Schleudern 75 Einbaugerät J/N Nein Die in der Tabelle oben enthaltenen Informationen erfüllen die Verordnung (EU) 1015/2010 der Kommission zur Durchführung der Richtlinie EG/2009/125. 19.
DEUTSCH 79
192951762-A-432018 www.aeg.