L6TB61278 USER MANUAL DE Benutzerinformation Waschmaschine
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................5 3. GERÄTEBESCHREIBUNG........................................................................................... 6 4. BEDIENFELD................................................................................................................7 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com 1.2 Allgemeine Sicherheit • • • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B. – Personalküchenbereiche in Geschäften, Büros und anderen Arbeitsumfeldern – Für Gäste in Hotels, Motels, Pensionen und anderen wohnungsähnlichen Räumlichkeiten.
DEUTSCH 5 Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände. 2. SICHERHEITSANWEISUNGEN 2.1 Montage Die Montage muss gemäß den einschlägigen nationalen Vorschriften erfolgen. • Entfernen Sie alle Verpackungsmaterialien, die Transportschrauben sowie die Gummibuchse und den Abstandshalter aus Kunststoff. • Bewahren Sie die Transportschrauben an einem sicheren Ort auf.
www.aeg.com Stromversorgung trennen möchten. Ziehen Sie stets am Netzstecker. • Das Gerät entspricht den ECRichtlinien. 2.3 Wasseranschluss • Achten Sie darauf, die Wasserschläuche nicht zu beschädigen. • Bevor Sie neue oder lange Zeit nicht benutzte Schläuche, an denen Reparaturarbeiten ausgeführt wurden oder neue Geräte (Wasserzähler usw.) an das Gerät anschließen, lassen Sie Wasser durch die Schläuche fließen, bis es sauber austritt.
DEUTSCH optimale Waschergebnisse in der kürzest möglichen Zeit zu erzielen. • Dank der Option Soft Plus wird der Weichspüler gleichmäßig in der 7 Wäsche verteilt, sodass er die Fasern durchdringt und für perfekte Weichheit sorgt. 3.2 Geräteübersicht 1 2 3 7 1 2 3 4 5 6 7 Bedienfeld Deckel Deckelgriff Sieb der Ablaufpumpe Hebel zum Bewegen des Geräts Füße für die Ausrichtung des Geräts Typenschild 4 5 6 4. BEDIENFELD 4.
www.aeg.com 7 Start/Pause Drucktaste 8 Flecken/Vorwäsche AbwahlSensortaste • Flecken Option • Vorwäsche Option 10 Flüssig Dosierung -Sensortaste 11 U/min. Sensortaste Drehzahlreduzierung 12 Temp. -Sensortaste 9 Zeitvorwahl -Sensortaste 4.2 Display MIX Die Anzeige blinkt während der Messung der Wäschemenge. Türverriegelungsanzeige. Zeitvorwahlanzeige. Die Digitalanzeige zeigt Folgendes an: • Programmdauer (z. B. • Zeitvorwahl (z. B. ). oder ). • Programmende ( ). • Fehlercode ( ).
DEUTSCH Temperaturanzeige. Die Anzeige mit kaltem Wasser gewählt wurde. erscheint, wenn ein Waschgang Schleuderdrehzahlanzeige. Anzeige Kein Schleudern. Die Schleuderphase ist ausgeschaltet, das Gerät führt nur die Abpumpphase aus. Spülstoppanzeige. Anzeige Extra Leise. Zeitsparanzeige. 5.
www.aeg.com Programm Standardtemperatur Temperaturbereich ReferenzMaxima- Programmbeschreibung schleuderd- le Belarehzahl dung Schleuderdrehzahlbereich Feinwäsche 30 °C 40 °C – kalt 1200 U/min 1200 - 400 U/min Wolle/Seide 40 °C 40 °C – kalt 1200 U/min 1200 - 400 U/min Anti-Allergie 20 Min. - 3 kg 60 °C 1200 U/min 1200 - 400 U/min 30 °C 40 °C - 30 °C 1200 U/min 1200 - 400 U/min 2,5 kg 1 kg Empfindliche Wäsche, wie z. B.
DEUTSCH Programm Standardtemperatur Temperaturbereich 11 ReferenzMaxima- Programmbeschreibung schleuderd- le Belarehzahl dung Schleuderdrehzahlbereich Verwenden Sie keinen Weichspüler, und stellen Sie sicher, dass sich keine Weichspülerrückstände in der Waschmittelschublade befinden.
www.aeg.com Programm Pumpen/ Schleudern Standardtemperatur Temperaturbereich ReferenzMaxima- Programmbeschreibung schleuderd- le Belarehzahl dung Schleuderdrehzahlbereich 1200 U/min 1200 U/min - 400 U/min - Schleudern der Wäsche und Abpumpen des in der Trommel verbliebenen Wassers. Alle Gewebearten, außer Wollwäsche und Feinwäsche. 7 kg 1) Während dieses Programms dreht sich die Trommel langsam, um einen schonenden Waschgang zu gewährleisten.
Feinwäsche Anti-Allergie 20 Min. - 3 kg Outdoor Daunen Leichtbügeln Pumpen/Schleudern Zeitvorwahl ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Flüssig Dosierung ■ ■ ■ ■ ■ ■ ■ ■ ■ Soft Plus ■ ■ ■ ■ ■ Wolle/Seide Pflegeleicht 13 Baumwolle DEUTSCH ■ 1) Diese Option ist nicht verfügbar bei einer Temperatur unter 40 °C. 2) Diese Option ist nicht verfügbar bei einer Temperatur unter 30 °C. 3) Wenn Sie die kürzeste Programmdauer einstellen, empfehlen wir Ihnen, die Wäschemenge zu verringern.
www.aeg.com Während des Waschprogramms können durch die ProSense-Technologie die Programmdauer und die Verbrauchswerte variieren. Siehe „ProSense-Beladungserkennung“ im Kapitel „Täglicher Gebrauch“.
DEUTSCH 15 7. OPTIONEN 7.1 Einführung Die Optionen/Funktionen lassen sich nicht zusammen mit allen Waschprogrammen auswählen. Prüfen Sie die Kompatibilität der Optionen/Funktionen mit den Waschprogrammen in der „Programmübersicht“. Eine Option/Funktion kann eine andere ausschließen. In diesem Fall ist es nicht möglich, die inkompatiblen Optionen/Funktionen zusammen auszuwählen. Achten Sie darauf, dass das Display und die Sensortasten stets sauber und trocken sind. 7.
www.aeg.com Wenn Sie die Taste Start/Pause berühren, wird lediglich die Abpumpphase ausgeführt. Das Gerät pumpt das Wasser nach etwa 18 Stunden automatisch ab. 7.5 Flecken/Vorwäsche Drücken Sie diese Taste mehrmals, um eine der beiden Optionen einzuschalten. • Flecken Wählen Sie diese Option, um dem Programm eine Phase zur Entfernung von Flecken hinzuzufügen, die stark verschmutzte oder fleckige Wäsche mit einem Fleckentferner reinigt. Geben Sie den Fleckentferner in das .
DEUTSCH Zeitvorwahl. Die Zeit erhöht sich in Schritten von 30 Minuten bis 90 Minuten und in Schritten von 2 Stunden bis zu 20 Stunden. Nach Berührung der Taste Start/Pause 17 7.11 Start/Pause Berühren Sie die Taste Start/Pause, um das Gerät zu starten, anzuhalten oder ein laufendes Programm zu unterbrechen. zeigt das Display die Anzeige und die gewählte Zeitvorwahl an und das Gerät startet den Countdown. 8. EINSTELLUNGEN 8.1 Signaltöne 8.
www.aeg.com 9. VOR DER ERSTEN INBETRIEBNAHME 2. Öffnen Sie den Wasserhahn. 3. Geben Sie 2 Liter Wasser in das Waschmittelfach für die Hauptwäsche. Dadurch wird das Abpumpsystem aktiviert. 4. Geben Sie eine kleine Waschmittelmenge in das Waschmittelfach für die Hauptwäsche. 5. Stellen Sie ein Baumwoll-Programm mit der höchsten Temperatur ein und starten Sie das Programm mit leerer Trommel. So werden alle eventuellen Verunreinigungen aus Trommel und Bottich entfernt.
DEUTSCH 19 Waschmittelfach für die Vorwäsche. Füllen Sie nicht mehr Waschmittel (Pulver- oder Flüssigwaschmittel) ein als bis zu den Marken MAX. Wenn Sie ein Programm mit der Fleckenoption wählen, geben Sie Waschmittel (Pulver- oder Flüssigwaschmittel) in das Fach. Waschmittelfach für die Hauptwäsche. Füllen Sie nicht mehr Waschmittel (Pulver- oder Flüssigwaschmittel) ein als bis zu den Marken MAX. Fach für flüssige Pflegemittel (Weichspüler, Stärke).
www.aeg.com • Position A für Waschpulver (Werkseinstellung). • Position B für Flüssigwaschmittel. Bei Verwendung von Flüssigwaschmitteln: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Obergrenze. 10.5 Einstellen eines Programms 1. Stellen Sie das Programm durch Drehen des Programmwahlschalters ein: • Die entsprechende Programmanzeige leuchtet auf. • Die Kontrolllampe Start/Pause blinkt.
DEUTSCH 2. Drücken Sie die Taste Zeitvorwahl wiederholt, bis im Display angezeigt wird. 3. Drücken Sie die Taste Start/Pause erneut, um das Programm sofort zu starten. 10.10 Unterbrechen eines Programms und Ändern einer Option Einige Optionen können nur geändert werden, bevor sie durchgeführt werden. 1. Drücken Sie die Taste Start/Pause. Die zugehörige Kontrolllampe blinkt. 2. Ändern Sie die eingestellte Option. 3. Drücken Sie die Taste Start/Pause erneut. Das Programm wird fortgesetzt. 10.
www.aeg.com 10.15 Programmende Wenn das Programm beendet ist, schaltet sich das Gerät automatisch aus. Falls Signaltöne eingeschaltet sind, ertönt ein Signalton. Im Display leuchtet und das Deckelverriegelungssymbol erlischt. Die Kontrolllampe der Taste Start/Pause erlischt. 1. Drücken Sie die Taste Ein/Aus, um das Gerät auszuschalten. Fünf Minuten nach Ende des Programms schaltet die Energiesparfunktion das Gerät automatisch aus.
DEUTSCH • Halten Sie sich an die Anweisungen auf den Kleidungsetiketten. • Waschen Sie weiße und bunte Wäsche nicht zusammen. • Manche farbigen Textilien können beim ersten Waschen färben. Wir empfehlen, sie deshalb die ersten Male separat zu waschen. • Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Schließen Sie Gürtel. • Wenden Sie mehrlagige Textilien, Wolle und bedruckte Wäschestücke vor dem Waschen. • Entfernen Sie hartnäckige Flecken mit einem speziellen Mittel.
www.aeg.com Programm mit niedriger Temperatur auswählen. • Erkundigen Sie sich nach der Wasserhärte Ihres Hausanschlusses, um die richtige Waschmittelmenge verwenden zu können. Siehe „Wasserhärte“. Enthärters für Waschmaschinen. In Gegenden mit weichem Wasser ist die Zugabe eines Enthärters nicht erforderlich. 11.5 Wasserhärte Verwenden Sie die richtige Menge Wasserenthärter. Halten Sie sich an die Anweisungen auf der Verpackung des Produkts.
DEUTSCH 12.4 Reinigen der Waschmittelschublade 1. 2. 3. 12.5 Reinigen des Ablaufsiebs Reinigen Sie das Ablaufsieb nicht, wenn das Wasser im Gerät heiß ist. 1. 2.
www.aeg.com 3. 4. 5. 12.6 Reinigen des Siebs des Zulaufschlauchs und Ventils 1. 2.
DEUTSCH 3. 27 4. 90˚ 12.7 Notentleerung Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen. In diesem Fall führen Sie die Schritte (1) bis (5) unter „Reinigen des Ablaufsiebs“ durch. Reinigen Sie bei Bedarf die Pumpe. 3. Stecken Sie die beiden Enden des Zulaufschlauchs in einen Behälter und lassen Sie das Wasser aus dem Schlauch fließen. 4. Leeren Sie die Ablaufpumpe. Siehe Notentleerungsverfahren. 5. Befestigen Sie den Zulaufschlauch wieder, wenn die Ablaufpumpe entleert ist.
www.aeg.com • – Das Aqua-Control-System ist eingeschaltet. Schalten Sie das Gerät aus und drehen Sie den Wasserhahn zu. Wenden Sie sich an einen autorisierten Kundendienst. WARNUNG! Schalten Sie das Gerät aus, bevor Sie die Überprüfungen vornehmen. 13.2 Mögliche Störungen Problem Das Programm startet nicht. Mögliche Abhilfe • Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist.
DEUTSCH 29 Problem Mögliche Abhilfe Das Gerät schleudert nicht oder das Waschprogramm dauert länger als gewöhnlich. • Stellen Sie das Schleuderprogramm ein. • Vergewissern Sie sich, dass das Ablaufsieb nicht verstopft ist. Reinigen Sie ggf. das Sieb. Siehe „Reinigung und Pflege“. • Verteilen Sie die Wäschestücke mit der Hand neu und starten Sie die Schleuderphase erneut. Das Problem kann durch eine Unwucht verursacht worden sein. Es befindet sich Wasser auf dem Boden.
www.aeg.com Schalten Sie das Gerät nach der Überprüfung wieder ein. Das Programm wird an der Stelle fortgesetzt, an der es unterbrochen wurde. Tritt das Problem erneut auf, wenden Sie sich an den autorisierten Kundendienst. Wenn im Display andere Alarmcodes angezeigt werden. Schalten Sie das Gerät aus und wieder ein. Tritt das Problem weiterhin auf, wenden Sie sich an den autorisierten Kundendienst. 14.
DEUTSCH 1. Drücken Sie zum Einschalten des Geräts die Taste Ein/Aus. Drehen Sie den Programmwahlschalter auf das gewünschte Programm. 2. Stellen Sie die gewünschten Optionen (1) mit den entsprechenden Sensortasten ein. Zum Starten des Programms berühren Sie die Taste Start/Pause 31 3. Das Gerät startet. Nehmen Sie am Programmende die Wäsche aus dem Gerät. Drücken Sie zum Ausschalten des Geräts die Taste Ein/Aus. (2). 15.
www.aeg.com Programme Beladung Leichtbügeln 1 kg Pumpen/Schleudern 7 kg Produktbeschreibung Pflegeleichte Textilien, die schonend gewaschen werden sollen. Normal und leicht verschmutzt.3) Alle Gewebearten, außer Wollwäsche und sehr empfindliche Feinwäsche. Programm zum Schleudern und Abpumpen des Wassers. 1) Waschprogramm. 2) Waschprogramm und Imprägnierphase.
DEUTSCH Schleudereffizienzklasse auf einer Skala von G (geringste Effizienz) bis A (höchste Effizienz) Maximale Schleuderdrehzahl in U/min 33 B 1151 Restfeuchte in % 53 Die Standardprogramme „Baumwolle 60 °C“ und „Baumwolle 40 °C“ die Standard-Waschprogramme sind jene Programme, auf die sich die Informationen auf dem Etikett und im Datenblatt beziehen, diese Programme sind zur Reinigung normal verschmutzter Baumwollwäsche geeignet und in Bezug auf den kombinierten Energie- und Wasserverbrauch am effiz
www.aeg.
DEUTSCH 35
192939201-A-512018 www.aeg.