User manual

The drain pump can operate for
a short time when the appliance
fills water.
9.4 Interrupt a programme
1.
Press button
4
. The indicator
flashes.
2.
Press button
4
again. The washing
programme continues.
9.5 Cancel a programme
1.
Press button
1
to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Press button
1
again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
9.6 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
4
. The indicator
flashes.
2.
Change the function set.
9.7 Set the delay start
1.
Press button
5
again and again un-
til the display shows the number of
minutes or hours. The related sym-
bols comes on.
2.
Press button
4
, the appliance
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
4
to
start the appliance, you can can-
cel or change the set of the delay
start.
9.8 Cancel the delay start
1.
Press button
4
. The related indica-
tor flashes.
2.
Press button
5
again and again un-
til the display shows 0’.
3.
Press button
4
. The programme
starts.
9.9 Open the lid
While a programme or the delay start
operates, the lid is locked.
To open the lid:
1.
Press button
4
. You can open the
lid 2 minutes after the appliance
stops. The door lock symbol in the
display goes off.
2.
Open the lid.
3.
Close the lid and press button
4
.
The programme or the delay start
continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the lid .
If necessary, do the following
procedure to open the lid.
1.
Deactivate the appliance.
2.
Wait for some minutes.
3.
Make sure that there is no
water in the drum.
If you deactivate the appliance, it
is necessary to set the pro-
gramme again.
9.10 At the end of programme
• The appliance stops automatically.
• The acoustic signals operate.
•
In the display
comes on.
• The indicator of the Start/Pause but-
ton
4
goes off.
• You can open the lid 2 minutes after
the appliance stops. The door lock
symbol goes off.
•
Press button
1
to deactivate the ap-
pliance. After five minutes from the
end of the programme, the AUTO
OFF function automatically deacti-
vates the appliance.
When you activate the appliance
again, the display shows the end
of the last set programme. Turn
the programme knob to set a
new cycle.
16
www.aeg.com