User manual

5.6 Time save button
6
Press the button
6
to decrease the
programme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
5.7 Liquid detergent button
7
Press button
7
to adapt the cycle if you
use a liquid detergent.
5.8 Stain button
8
Press button
8
to add the stain phase
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
5.9 Spin button
9
Press this button to:
• Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
Spin phase is off.
'Rinse Hold' function is
on.
5.10 Temperature button
10
Press button
10
to change the default
temperature.
- - = cold water
5.11 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
5
and button
6
at
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
5.12 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, press button
9
and button
10
at the same time
until the display shows the symbol
.
• To deactivate the function, press but-
ton
9
and button
10
at the same
time until the symbol
goes off.
You can activate the function:
• Before you press the Start/Pause but-
ton
4
: the appliance cannot start.
• After you press the Start/Pause button
4
, all the buttons and the pro-
gramme knob are deactivated.
5.13 Permanent extra rinse
function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
•To activate the function press button
7
and button
8
at the same time
until the display shows the symbol
.
•To deactivate the function press but-
ton
7
and button
8
at the same
time until the symbol
goes off.
ENGLISH 9