User manual

Selection of the EXTRA RINSE option
Press simultaneously the buttons PRELAVADO and LAVADO RAPIDO
for about 2 seconds: the light ACLARADO ADICIONAL comes on in the
programme progress display.
This function stays permanently on. To remove it press the same but-
tons again until the light ACLARADO ADICIONAL comes off.
Select the DELAY START option
To delay starting of a programme, press the DELAY START button
ARRANQUE RETARDADO before starting the machine. The figures
corresponding to the selected delay will be displayed for about 3 sec-
onds, after which the duration of the selected programme will appear
on the display.
If the button REMOJO (SOAK) has been pressed the selected delay will
correspond to the soak time. If no delay time is selected the soak pro-
gramme will last about 30 minutes.
When the START/PAUSE button is pressed, the selected delay will
appear again on the display and the machine starts its countdown.
Starting the programme
1. Check that the water tap is open.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start
at the end of the countdown.
If the door light PUERTA is red and flashing at the start of the pro-
gramme it indicates that the door is open. Close the door and press
the START/PAUSE button again.
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to modify or cancel the
delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Modify or cancel the delay time: press the START/PAUSE button.
Press the DELAY START button ARRANQUE RETARDADO until the
time required appears on the display, or 0h, if you wish to cancel it.
Press the START/ PAUSE button again.
23
How to wash
132997890.qxd 01/06/01 10.57 Pagina 23 (Nero/Process Black pellicola)