User manual

Check that the door is aligned with the appliance. To do this, loosen
screw (9 - Fig. B) by a couple of turns and re-tighten when alignment
is correct.
Fit the flexible end of the door catch (1 - Fig. B) into the location
provided in the door.
Fitting a door panel
The door of this machine has mouldings to allow fitting of a decorati-
ve panel (stainless steel sheet, laminated plastic, wood etc.) to match
with the existing kitchen units.
The dimensions of the panel must be as follows:
Width 588 mm
Height 588 mm
Maximum thickness 4 mm
To fit the panel, remove the moulding by unscrewing its fixing screws.
Position the panel, then refit the moulding, making sure that it comes
into contact with and firmly clamps the panel.
43
132997890.qxd 01/06/01 10.57 Pagina 43 (Nero/Process Black pellicola)