LAVAMAT 73370TL USER MANUAL FR Notice d'utilisation Lave-linge
www.aeg.com TABLE DES MATIÈRES 1. INFORMATIONS DE SÉCURITÉ.............................................................................. 3 2. CONSIGNES DE SÉCURITÉ..................................................................................... 4 3. DESCRIPTION DE L'APPAREIL................................................................................ 6 4. BANDEAU DE COMMANDE................................................................................... 6 5. TABLEAU DES PROGRAMMES.............
FRANÇAIS 1. 3 INFORMATIONS DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne pourra être tenu pour responsable des blessures et dégâts résultant d'une mauvaise installation ou utilisation. Conservez toujours les instructions dans un lieu sûr et accessible pour vous y référer ultérieurement. 1.
www.aeg.com • • • • • • • Les orifices d'aération situés à la base (si présents) ne doivent pas être obstrués par de la moquette, un tapis, ou tout type de revêtement de sol. L'appareil doit être raccordé à l'arrivée d'eau à l'aide des tuyaux neufs fournis, ou d'autres tuyaux neufs fournis par le service après-vente agréé. N'utilisez pas de tuyaux provenant d'anciens appareils.
FRANÇAIS • Utilisez toujours une prise de courant de sécurité correctement installée. • Vérifiez que les données électriques figurant sur la plaque signalétique correspondent à celles de votre réseau. Si ce n'est pas le cas, contactez un électricien. • N'utilisez pas d'adaptateurs multiprises ni de rallonges. • Veillez à ne pas endommager la fiche secteur ni le câble d'alimentation. Le remplacement du cordon d'alimentation de l'appareil doit être effectué par notre service après-vente agréé.
www.aeg.com 3. DESCRIPTION DE L'APPAREIL 3.1 Vue d'ensemble de l'appareil 1 2 Bandeau de commande Couvercle Accès facile Filtre de la pompe de vidange Levier de déplacement du lave-linge Pieds pour la mise de niveau de l'appareil 7 Plaque signalétique 1 2 3 4 5 6 3 7 4 5 6 4. BANDEAU DE COMMANDE 4.1 Description du bandeau de commande 1 2 Coton Eco Blanc/Couleurs Super Eco Prélavage 20 min.
FRANÇAIS 10 Touche de température (Temp.) 4.2 Prélavage A B C Zone de température : A Indicateur de température Indicateur d'eau froide. Zone d'essorage : Indicateur de vitesse d'essorage B Indicateur Sans essorage1) Indicateur Arrêt cuve pleine 1) Uniquement disponible pour le programme Essorage/Vidange.
www.aeg.com Zone de temps : Durée du programme Départ différé D Codes d'alarme Message d'erreur Le programme est terminé 5. TABLEAU DES PROGRAMMES Programme Charge maxiPlage de tempéra- male tures Vitesse d'essorage maximale Description des programmes (Type de charge et degré de salissure) Programmes de lavage Blanc/Couleurs 95 °C - Froid 7 kg 1300 tr/min Coton blanc et couleurs. Normalement sale ou légèrement sale.
FRANÇAIS Programme Charge maxiPlage de tempéra- male tures Vitesse d'essorage maximale Description des programmes (Type de charge et degré de salissure) Essorage/ 7 kg 1300 tr/min Pour essorer le linge et vidanger l'eau du tambour. Tous textiles, excepté la laine et les tissus délicats. Rinçage 7 kg 1300 tr/min Pour rincer et essorer le linge. Tous textiles, excepté la laine et les tissus très délicats. Réduisez la vitesse d'essorage en fonction du type de linge.
www.aeg.
FRANÇAIS 5.1 Woolmark Apparel Care Bleu le lavage des vêtements en laine portant une étiquette « lavage à la main », sous réserve que les vêtements soient lavés conformément aux instructions mentionnées par le fabricant de ce lavelinge. Respectez les instructions de séchage figurant sur l'étiquette des vêtements et toutes les autres instructions concernant le linge. M1145 Au Royaume-Uni, en Irlande, à Hong Kong ainsi qu'en Inde, le symbole Woolmark est une marque de certification.
www.aeg.com Programmes Charge (kg) Consomma- Consomma- Durée apHumidité tion énergé- tion d'eau proximative résiduelle tique (kWh) (litres) du pro(%)1) gramme (minutes) Programmes coton standard Coton 60 °C stand- 7 0,95 47 255 52 3,5 0,65 39 188 52 3,5 0,59 39 187 52 ard Coton 60 °C standard Coton 40 °C standard 1) Au terme de la phase d'essorage. 2) Non disponible sur certains modèles. Mode « Éteint » (W) Mode « Veille » (W) 0.48 0.
FRANÇAIS 13 Le voyant correspondant s'allume. Utilisez cette option pour le linge très taché. Si vous sélectionnez cette option, placez 7.6 Gain de Temps le détachant dans le compartiment Cette option vous permet de diminuer la durée d'un programme. . Cette option allonge la durée du programme. Cette option n'est pas disponible avec des températures de lavage inférieures à 40 °C. 7.4 Lessive Liquide Appuyez sur cette touche pour adapter le cycle si vous utilisez de la lessive liquide.
www.aeg.com • Pour activer/désactiver cette option, appuyez simultanément sur les touches Taches et Lessive Liquide jusqu'à ce que le voyant s'allume/ s'éteigne. 9. AVANT LA PREMIÈRE UTILISATION 1. Versez 2 litres d'eau dans le distributeur de produit de lavage pour la phase de lavage. Cela active le système de vidange. 2. Versez une petite quantité de détergent dans le compartiment de la phase de lavage. 3.
FRANÇAIS 15 Respectez toujours les instructions figurant sur l'emballage des lessives. Compartiment à lessive pour la phase de prélavage. Le repère MAX correspond au niveau maximal de lessive (en poudre ou liquide). Compartiment à lessive pour la phase de lavage. Le repère MAX correspond au niveau maximal de lessive (en poudre ou liquide). Compartiment réservé aux additifs liquides (assouplissant, amidon). Le repère M indique le niveau maximal pour les additifs liquides.
www.aeg.com 10.6 Réglage d'un programme 1. Tournez le sélecteur pour régler le programme : • Le voyant correspondant au programme s'allume. • Le voyant Départ/Pause clignote. • L'affichage indique : la température par défaut, la vitesse d'essorage, les voyants des phases de programme et la durée du programme. 2. Si nécessaire, modifiez la température, la vitesse d'essorage, la durée du cycle ou ajoutez des options disponibles. Lorsque vous activez une option, le voyant correspondant s'allume.
FRANÇAIS 2. Appuyez à nouveau sur la touche Marche/Arrêt pour allumer l'appareil. Maintenant, vous pouvez sélectionner un nouveau programme de lavage. Avant de lancer le nouveau programme, l'appareil peut vidanger l'eau. Dans ce cas, assurez-vous qu'il y a toujours du détergent dans le compartiment de produit de lavage ; si ce n'est pas le cas, versez à nouveau du détergent. 10.
www.aeg.com L'appareil effectue automatiquement la vidange et l'essorage au bout d'environ 18 heures. 10.17 Option « Veille auto » La fonction Veille auto éteint automatiquement l'appareil pour réduire la consommation d'énergie lorsque : • Vous n'utilisez pas l'appareil pendant 5 minutes avant d'appuyer sur la touche Départ/Pause. Appuyez sur la touche Marche/Arrêt pour mettre à nouveau l'appareil en marche. • Au bout de 5 minutes après la fin du programme de lavage.
FRANÇAIS • • • • • – lessives en poudre pour les textiles délicats (40 °C max.) et les lainages, – lessives liquides, de préférence pour les programmes de lavage à basse température (60 °C max.) pour tous les types de textiles, ou lessives spéciales pour les lainages uniquement. Ne mélangez pas différents types de produits de lavage. Afin de préserver l'environnement, n'utilisez que la quantité nécessaire de produit de lavage. Respectez les instructions qui se trouvent sur les emballages de ces produits.
www.aeg.com • Sélectionnez le programme pour le coton à température maximale avec une petite quantité de détergent. 12.4 Nettoyage du distributeur de produit de lavage 1. 2. 3. 12.5 Nettoyage du filtre de vidange Ne nettoyez pas le filtre de vidange si l'eau dans l'appareil est chaude. 1. 2.
FRANÇAIS 3. 4. 5. 12.6 Nettoyage du tuyau d'arrivée d'eau et du filtre de la soupape 1. 2.
www.aeg.com 3. 4. 90˚ 12.7 Vidange d'urgence En raison d'une anomalie de fonctionnement, l'appareil ne peut pas vidanger l'eau. Si cela se produit, procédez aux étapes (1) à (5) du chapitre « Nettoyage du filtre de vidange ». Si nécessaire, nettoyez la pompe. 3. Placez les deux extrémités du tuyau d'alimentation dans un récipient et laissez l'eau s'écouler du tuyau. 4. Videz la pompe de vidange. Reportez-vous à la procédure de vidange d'urgence. 5.
FRANÇAIS 23 AVERTISSEMENT! Éteignez l'appareil avant de procéder aux vérifications. 13.2 Pannes possibles Problème Solution possible Le programme ne démarre pas. Assurez-vous que la fiche du câble d'alimentation est bien insérée dans la prise de courant. Assurez-vous que le couvercle et les portes du tambour de l'appareil sont correctement fermés. Assurez-vous qu'aucun fusible n'est grillé dans la boîte à fusibles. Assurez-vous que la touche Départ/Pause est enfoncée.
www.aeg.com Problème Solution possible Vérifiez que le raccordement du tuyau de vidange est correct. Sélectionnez le programme de vidange si vous avez choisi un programme sans phase de vidange. Sélectionnez le programme de vidange si vous avez choisi une option se terminant avec de l'eau dans la cuve. La phase d'essorage n'a pas lieu ou le cycle de lavage dure plus longtemps que d'habitude. Sélectionnez l'option d'essorage.
FRANÇAIS Problème 25 Solution possible Veillez à sélectionner la bonne température. Réduisez la charge de linge. Impossible de régler une Assurez-vous d'avoir appuyé sur la/les bonne(s) touche(s). option. Après avoir effectué ces contrôles, mettez l'appareil en marche. Le programme reprend là où il s'était interrompu. Si le problème persiste, contactez le service après-vente agréé. Si l'écran affiche d'autres codes d'alarme. Éteignez puis rallumez l'appareil.
www.aeg.
FRANÇAIS 27
192952360-A-332016 www.aeg.