L 74270 TL FR Notice d'utilisation
www.aeg.com SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. CONSIGNES DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DESCRIPTION DE L'APPAREIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ACCESSOIRES . . . . . . . . . . . . . . . . . . . . . . . . . . .
FRANÇAIS 3 1. CONSIGNES DE SÉCURITÉ Avant d'installer et d'utiliser cet appareil, lisez soigneusement les instructions fournies. Le fabricant ne peut être tenu pour responsable des dommages et blessures liés à une mauvaise installation ou utilisation. Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.1 Sécurité des enfants et des personnes vulnérables AVERTISSEMENT Risque d'asphyxie, de blessure ou d'invalidité permanente.
www.aeg.com • Ne modifiez pas les caractéristiques de cet appareil. • Respectez la charge maximale de 7 kg (reportez-vous au chapitre « Tableau des programmes »). • Si le câble d'alimentation est endommagé, il doit être remplacé par le fabricant, son atelier d'entretien ou un technicien qualifié afin d'éviter tout danger.
FRANÇAIS • • • • remplacement du cordon d'alimentation de l'appareil doit être effectué par notre service après-vente. Ne connectez la fiche d'alimentation à la prise de courant qu'à la fin de l'installation. Assurez-vous que la prise de courant est accessible une fois l'appareil installé. Ne tirez jamais sur le câble d'alimentation électrique pour débrancher l'appareil. Tirez toujours sur la prise. Ne touchez jamais le câble d'alimentation ou la prise avec des mains mouillées.
www.aeg.com 3. DESCRIPTION DE L'APPAREIL 1 7 2 8 9 3 10 11 4 5 6 12 1 Bandeau de commande 8 Câble d'alimentation électrique 2 Couvercle 3 Poignée d'ouverture du couvercle 9 Tuyau d'arrivée d'eau 10 Tuyau d'évacuation d'eau 4 Volet d'accès au filtre 11 Boulons de transport 5 Levier de déplacement du lave-linge 6 Pieds réglables 12 Pieds pour la mise à niveau de l'ap- pareil 7 Plaque signalétique 4.
FRANÇAIS 7 5. BANDEAU DE COMMANDE 1 2 3 10 1 Touche Marche/Arrêt 2 Sélecteur de programme 3 Affichage 4 Touche Départ/Pause 5 Touche Départ différé 6 Touche Gain de temps 7 Touche Lessive liquide 8 Touche Taches 9 Touche Essorage 10 Touche de température 5.1 Bouton marche/arrêt 1 Appuyer sur ce bouton pour activer ou désactiver le lave-linge. Une tonalité retentit lorsque le lave-linge est activé.
www.aeg.com B • La vitesse d'essorage par défaut du programme. • Les symboles « Sans essorage »1) et « Arrêt cuve pleine ». C • Les symboles de l'écran.2) Symboles Description Phase de lavage Phase de rinçage Phase d'essorage Sécurité enfants Rinçage plus Vous ne pouvez pas ouvrir le capot de l'appareil lorsque ce symbole est allumé. Vous ne pouvez ouvrir le capot de l'appareil que lorsque ce symbole est éteint.
FRANÇAIS 5.4 Touche Départ/Pause 4 Appuyez sur la touche 4 pour lancer ou interrompre le programme. 5.5 Touche Départ différé 5 Appuyez sur la touche 5 pour retarder le départ d'un programme de 30 minutes à 20 heures. L'écran n'affiche que les vitesses disponibles pour le programme sélectionné. • Désactiver la phase d'essorage. • Activer la fonction « Arrêt cuve pleine ». Sélectionnez cette fonction pour éviter que les tissus ne se froissent.
www.aeg.com même temps jusqu'à ce que le symbole s'éteigne. Vous pouvez activer la fonction : • Avant d'appuyer sur la touche Départ/ Pause 4 : l'appareil ne peut pas démarrer. • Après avoir appuyé sur la touche Départ/Pause 4 , toutes les touches et le sélecteur de programmes sont désactivés. permanence lorsque vous sélectionnez un nouveau programme. • Pour activer la fonction, appuyez sur la touche 7 et sur la touche 8 simultanément jusqu'à ce que l'affi.
FRANÇAIS 11 Programme Température Type de charge Charge max. Description du cycle Fonctions Synthétiques 60° - Froid Vêtements en tissus synthétiques ou mixtes normalement sales. Max. 3 kg Lavage Rinçages Essorage court RÉDUCTION DE LA VITESSE D'ESSORAGE ARRÊT CUVE PLEINE TACHES1) LESSIVE LIQUIDE RINÇAGE PLUS GAIN DE TEMPS2) Synthétiques In- Articles synthétiques tensifs ou en tissus mixtes 60° - Froid très sales. Max.
www.aeg.com Programme Température Type de charge Charge max. Description du cycle Fonctions Essorage/Vidange4) Tous textiles La charge maximale de linge est définie en fonction du type de linge. Vidange de l'eau Phase d'essorage à la vitesse maximale. RÉDUCTION DE LA VITESSE D'ESSORAGE SANS ESSORAGE Rinçage Tous textiles.
FRANÇAIS Programme Température Super Eco6) Froid Coton Eco7) 60° - 40° Type de charge Charge max. Textiles mixtes (articles en coton et synthétiques). Max. 3 kg Description du cycle Lavage Rinçages Essorage court Vêtements en coton blanc et couleurs grand teint normalement sales. Max.
www.aeg.com 7. VALEURS DE CONSOMMATION Au démarrage du programme, l'affichage indique la durée du programme pour la charge maximale. Durant la phase de lavage, la durée du programme est calculée automatiquement. Elle peut être réduite si la charge de linge est inférieure à la capacité maximale (par exemple, pour le programme Coton 60 °C, dont la capacité maximale est de 7 kg, la durée du programme est de plus de 2 heures ; pour une charge réelle de 1 kg, la durée du programme est inférieure à 1 heure).
FRANÇAIS 15 8. AVANT LA PREMIÈRE UTILISATION Mettez une petite quantité de produit de lavage dans le compartiment de lavage principal de la boîte à produits. Sélectionnez et lancez, sans linge, un pro- gramme pour le coton à la température la plus élevée. Ceci permet d'éliminer toutes salissures du tambour et de la cuve. 9. UTILISATION DE L'APPAREIL 1. 2. 3. Ouvrez le robinet d'arrivée d'eau. Branchez l'appareil au secteur. Appuyez sur la touche 1 pour activer l'appareil. 4.
www.aeg.com Compartiment à lessive pour la phase de lavage. Le repère MAX correspond au niveau maximal de lessive (en poudre ou liquide). Compartiment réservé aux additifs liquides (assouplissant, amidon). Le repère M indique le niveau maximal pour les additifs liquides. Volet pour produit de lavage en poudre ou liquide. Lessive liquide ou en poudre 1. 2. CLICK A 3. 4. CLICK B • Position A pour la lessive en poudre (réglage d'usine). • Position B pour la lessive liquide.
FRANÇAIS tionnée s'allume ou l'écran affiche le symbole correspondant. 5. Appuyez sur la touche 4 pour lancer le programme. Le voyant de la touche 4 est allumé. La pompe de vidange peut momentanément se mettre en route lorsque l'appareil se remplit d'eau. 9.7 Sélectionner le départ différé. 1. Appuyez plusieurs fois sur le bouton 5 jusqu'à ce que le délai du départ différé souhaité apparaisse sur l'écran. Les symboles correspondants apparaissent. 2.
www.aeg.com Si la température et le niveau de l'eau dans le tambour sont trop élevés, le symbole de verrouillage de la porte reste allumé et vous ne pouvez pas ouvrir le couvercle. Si nécessaire, suivez la procédure ci-dessous pour ouvrir le couvercle. 1. Mettez à l'arrêt l'appareil. 2. Attendez quelques minutes. 3. Veillez à ce qu'il n'y ait pas d'eau dans le tambour. Si vous mettez à l'arrêt l'appareil, il est nécessaire de sélectionner à nouveau un programme. 9.
FRANÇAIS • Tournez vers l'intérieur les tissus multicouches, la laine et les articles portant des illustrations imprimées. • Enlevez les taches. • Lavez avec un produit spécial les taches incrustées. • Traitez les rideaux avec précautions. Enlevez les crochets et placez les rideaux dans un sac de lavage ou une taie d'oreiller. • Ne lavez pas dans l'appareil : – Le linge sans ourlet ou déchiré – Les soutien-gorges à armatures. – Utilisez un sac de lavage pour les articles très petits.
www.aeg.com Tableau de dureté de l'eau Dureté de l'eau Niveau Type °dH °T.H. mmol/l Degrés Clarke 1 douce 0-7 0-15 0-1,5 0-9 2 moyenne 8-14 16-25 1,6-2,5 10-16 3 dure 15-21 26-37 2,6-3,7 17-25 4 très dure > 21 > 37 >3,7 >25 11. ENTRETIEN ET NETTOYAGE AVERTISSEMENT Déconnectez l'appareil de l'alimentation électrique avant de le nettoyer. 11.1 Détartrage de l’appareil L'eau du robinet contient du calcaire.
FRANÇAIS 21 1. Retirez la boîte à produits et déconnectez les deux parties. 2. Nettoyez toutes les parties à l'eau. 3. Remontez les deux parties de la boîte à produits. 4. Remettez en place la boîte à produits. 11.5 Filtre de vidange AVERTISSEMENT • Débranchez l'appareil. • Ne retirez pas le filtre pendant que l'appareil fonctionne. Ne nettoyez pas le filtre de vidange si l'eau dans l'appareil est chaude. L'eau doit être froide avant que vous commenciez à nettoyer le filtre de vidange.
www.aeg.com Pour nettoyer les filtres du tuyau d'arrivée d'eau : Fermez le robinet d'arrivée d'eau. Retirez le tuyau d'arrivée d'eau du robinet. 3. Nettoyez le filtre du tuyau d'arrivée d'eau à l'aide d'une brosse dure. 1. 2. 4. 5. 6. 7. Démontez le tuyau d'arrivée d'eau derrière l'appareil. Nettoyez le filtre dans la vanne à l'aide d'une brosse dure ou d'une serviette. Réinstallez le tuyau d'arrivée d'eau. Vérifiez l'étanchéité des raccords pour évite les fuites. Ouvrez le robinet d'arrivée d'eau.
FRANÇAIS 23 AVERTISSEMENT Veillez à ce que la température soit supérieure à 0 °C avant de réutiliser l'appareil. Le fabricant n'est pas responsable des dommages causés par les basses températures. 12. EN CAS D'ANOMALIE DE FONCTIONNEMENT L'appareil ne démarre pas ou se met à l'arrêt en cours de programme. Dans un premier temps, essayez de trouver une solution au problème (reportezvous au tableau). Si vous n'y parvenez pas, contactez votre service après-vente. • - L'appareil ne vidange pas.
www.aeg.com Problème Cause probable Solution possible Le filtre de la pompe de vidange est obstrué. Nettoyez le filtre de la pompe de vidange. Reportez-vous au chapitre « Entretien et nettoyage ». Le tuyau d'évacuation d'eau est mal raccordé. Assurez-vous que le raccordement est correct. Un programme de lava- Sélectionnez le programme de ge sans phase de vidan- vidange. ge a été sélectionné. La fonction « Arrêt cuve pleine » est activée. Sélectionnez le programme de vidange.
FRANÇAIS Problème Impossible d'ouvrir le hublot de l'appareil. L'appareil fait un bruit inhabituel. Cause probable Solution possible Fuites au niveau de la pompe de vidange. Vérifiez que le filtre de la pompe de vidange est bien serré. Le tuyau d'évacuation de l'eau est endommagé. Assurez-vous que le tuyau d'arrivée d'eau n'est pas endommagé. Le programme de lavage est en cours. Laissez le programme de lavage se terminer. Il y a de l'eau dans le tambour.
www.aeg.com 13.
FRANÇAIS 27
108860101-B-132015 www.aeg.