User manual

3.
CLICK
4.
B
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
9.3 Setting and starting a
programme
1.
Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
4
flashes
with red colour.
3.
The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4.
Set the available functions. The indi-
cator of the set function comes on or
the display shows the related sym-
bol.
5.
Press button
4
to start the pro-
gramme. The indicator of button
4
is on.
The drain pump can operate for
a short time when the appliance
fills water.
9.4 Interrupt a programme
1.
Press button
4
. The indicator
flashes.
2.
Press button
4
again. The washing
programme continues.
9.5 Cancel a programme
1.
Press button
1
to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Press button
1
again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
9.6 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
4
. The indicator
flashes.
2.
Change the function set.
9.7 Set the delay start
1.
Press button
5
again and again un-
til the display shows the number of
minutes or hours. The related sym-
bols comes on.
2.
Press button
4
, the appliance
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
16
www.aeg.com