L 75460 TL1 ES Manual de instrucciones
www.aeg.com ÍNDICE DE MATERIAS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. INFORMACIÓN SOBRE SEGURIDAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTRUCCIONES DE SEGURIDAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DESCRIPCIÓN DEL PRODUCTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ACCESORIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ESPAÑOL 3 1. INFORMACIÓN SOBRE SEGURIDAD Antes de instalar y utilizar el aparato, lea atentamente las instrucciones facilitadas. El fabricante no se hace responsable de los daños y lesiones causados por una instalación y uso incorrectos. Guarde siempre las instrucciones junto con el aparato para futuras consultas. • Si el aparato dispone de dispositivo de seguridad para niños, se recomienda activarlo. • La limpieza y el mantenimiento no podrán realizarlas niños sin supervisión. 1.
www.aeg.com • El aparato es pesado, tenga cuidado siempre cuando lo mueva. Utilice siempre guantes de protección. • Compruebe que el aire circula libremente entre el aparato y el suelo. • Ajuste las patas para disponer del espacio necesario entre el aparato y la moqueta. • Antes de conectar el aparato a las nuevas tuberías o a tuberías que no se hayan usado durante mucho tiempo, deje correr el agua hasta que esté limpia. • La primera vez que utilice el aparato, asegúrese de que no hay fugas. 2.
ESPAÑOL 3. 2.4 Deseche el aparato. Desenchufe el aparato de la toma de red. 2. Corte el cable de conexión a la red y deséchelo. 1. 5 Deseche el cierre de la puerta. De esta forma evitará que los niños o mascotas queden encerrados en el aparato. Existe riesgo de asfixia (solo para electrodomésticos de carga frontal). 3.
www.aeg.com 5. PANEL DE MANDOS 1 2 3 10 1 Tecla de encendido/apagado 2 Selector de programas 3 Pantalla 4 Tecla de inicio/pausa 5 Tecla de inicio diferido 6 Tecla de ahorro de tiempo 7 Tecla de detergente líquido 8 Tecla de manchas 9 Tecla de centrifugado 10 Tecla de temperatura 9 8 7 6 5 4 La función AUTO Stand-by apaga automáticamente el aparato para reducir el consumo de energía cuando: • No se utiliza el aparato durante 5 minutos antes de pulsar el botón 4 .
ESPAÑOL B • Velocidad de centrifugado por defecto del programa. • "Sin centrifugado"1) y "Agua en la cuba" (símbolos). C • Símbolos de la pantalla.2) Símbolos 7 Descripción Fase de lavado Fases de aclarado Fase de centrifugado Bloqueo contra la manipulación por niños AquaCare No se puede abrir la puerta del aparato cuando el símbolo está encendido. Puede abrir la puerta únicamente cuando el símbolo se apague. Si el programa termina pero el símbolo sigue encendido: • Hay agua en el tambor.
www.aeg.com 5.4 Botón de inicio/pausa 4 Pulse el botón 4 para iniciar o interrumpir el programa. 5.5 Tecla de inicio diferido 5 Pulse el botón 5 para retrasar el inicio de un programa entre 30 minutos y 20 horas. La pantalla muestra únicamente las velocidades de centrifugado disponibles para el programa seleccionado. • Desactivar la fase de centrifugado. • Active la función "Agua en la cuba". Ajuste esta función para evitar arrugas en los tejidos. El aparato no desagua cuando termina el programa.
ESPAÑOL • Para desactivar la función, pulse el botón 9 y el botón 10 al mismo tiempo hasta que se apague el símbolo . Puede activar la función: • Antes de pulsar el botón de inicio/ pausa 4 : el aparato no se puede iniciar. • Después de pulsar el botón Inicio/ Pausa 4 , todos los botones y el selector de programas están desactivados. 9 permanente cuando ajuste un nuevo programa. • Para activar la función, pulse el botón 7 y el botón 8 al mismo tiempo hasta que la pantalla muestre el símbolo .
www.aeg.com Programa Temperatura Tipo de carga Descripción peso máx. de la car- del ciclo ga Funciones Algodón + Prelavado 95° - Frío Algodón blanco y de color con suciedad intensa. máx. 6 kg Prelavado Lavado Aclarados Centrifugado largo REDUCCIÓN DEL CENTRIFUGADO SIN CENTRIFUGADO AGUA EN LA CUBA DETERGENTE LÍQUIDO ACLARADO EXTRA AHORRA TIEMPO1) Extra Silencio 95° - Frío Algodón blanco y de color con suciedad normal. máx.
ESPAÑOL 11 Programa Temperatura Tipo de carga Descripción peso máx. de la car- del ciclo ga Funciones Delicados 40° - Frío Tejidos delicados como acrílicos, viscosa o poliéster con suciedad normal. máx. 3 kg Lavado Aclarados Centrifugado corto REDUCCIÓN DEL CENTRIFUGADO SIN CENTRIFUGADO AGUA EN LA CUBA MANCHAS DETERGENTE LÍQUIDO ACLARADO EXTRA AHORRA TIEMPO1) Lana lavable a máquina. Lana lavable a mano y tejidos delicados con el símbolo «lavado a mano». máx.
www.aeg.com Programa Temperatura Tipo de carga Descripción peso máx. de la car- del ciclo ga Funciones Tejidos Gruesos Todas las prendas 60° - Frío vaqueras. Jerséis de materiales de alta tecnología. máx. 3 kg Lavado Aclarados Centrifugado corto REDUCCIÓN DEL CENTRIFUGADO SIN CENTRIFUGADO AGUA EN LA CUBA DETERGENTE LÍQUIDO ACLARADO EXTRA AHORRA TIEMPO1) 20 min. - 3 kg 40° - 30° Prendas sintéticas y de algodón con poca suciedad o que se han llevado una sola vez.
ESPAÑOL 13 3) La fase predeterminada de la velocidad de centrifugado es relativa a las prendas de algodón. Ajuste la velocidad de centrifugado. Asegúrese de que coincide con la colada. 4) Seleccione este programa para reducir la duración y el consumo de energía y agua. 5) Según la norma 1061/2010, “Algodón EcoAlgodón Eco 60 °C” y “40 °C” son respectivamente el “programa estándar de algodón a 60 °C” y el “programa estándar de algodón a 40 °C”.
www.aeg.com 7. VALORES DE CONSUMO Los datos de esta tabla son aproximados. Los datos pueden cambiar por varios motivos: la cantidad y tipo de colada, el agua y la temperatura ambiente. Programas red. (kg) Consumo energético (KWh) Consumo de Duración agua (litros) aproximada del programa (minutos) Humedad restante (%)1) Algodón 60 °C 6 1.10 56 180 52 Algodón 40 °C 6 0.60 54 170 52 Sintéticos 40 °C 3 0.45 45 105 35 Delicados 40 °C 3 0.
ESPAÑOL 15 9. UTILIZACIÓN DEL APARATO 1. 2. Abra el grifo. Conecte el enchufe a la toma de red. 3. Pulse el botón 1 para encender el aparato. 4. Introduzca la colada en el aparato. 5. Utilice la cantidad correcta de detergente y aditivos. 6. Ajuste e inicie el programa correcto para el tipo de colada y suciedad. 9.1 Carga de la colada Abra la tapa del aparato. Pulse el botón A (en función del modelo). El tambor se abre automáticamente. 3. Introduzca las prendas.
www.aeg.com Detergente líquido o en polvo 1. 2. CLICK A 3. 4. CLICK B • Posición A para detergente en polvo (ajuste de fábrica). • Posición B para detergente líquido. Cuando use detergente líquido: – No utilice detergentes líquidos gelatinosos ni gruesos. – No cargue más líquido del nivel máximo. 9.3 Ajuste e inicio de un programa 1. 5. Gire el selector de programas. Se ilumina el indicador de programa correspondiente.
ESPAÑOL 9.5 Cancelación de un programa 1. Pulse el botón 1 para cancelar el programa y apagar el aparato. 2. Pulse el botón 1 de nuevo para encender el aparato. Ahora puede ajustar un nuevo programa de lavado. El aparato no desagua. 9.9 Abra la tapa Mientras un programa o el inicio diferido están en marcha, la tapa está bloqueada. Para abrir la tapa: 1. Pulse la tecla 4 . Puede abrir la tapa 2 minutos después de que se detenga el aparato. El símbolo del candado de la puerta se apaga. 2. Abra la tapa.
www.aeg.com • Retire la colada del aparato. Asegúrese de que el tambor está totalmente vacío. • Deje la puerta entreabierta para evitar la formación de moho y olores desagradables. • Cierre la toma de agua. El programa de lavado ha terminado, pero la función de "Agua en la cuba" está encendida: – El tambor gira regularmente para evitar arrugas en las prendas. – La puerta permanece bloqueada. – Debe drenar el agua para abrir la puerta. Para descargar el agua: 1.
ESPAÑOL • Use los productos adecuados para el tipo y color del tejido, la temperatura del programa y el grado de suciedad. 10.4 Consejos ecológicos Para contribuir con el medio ambiente, use menos agua y energía y siga estas instrucciones: • Ajuste un programa sin la fase de prelavado para lavar ropa con suciedad normal. • Empiece siempre un programa de lavado con la carga de colada máxima. • Si fuera necesario, utilice un quitamanchas cuando ajuste un programa a baja temperatura.
www.aeg.com 11.3 Lavado de mantenimiento Con los programas a baja temperatura, es posible que quede algo de detergente en el tambor. Realice periódicamente un lavado de mantenimiento. Para ello: • Saque las prendas del tambor. • Seleccione el programa de lavado de algodón de mayor temperatura • Use la cantidad correcta de detergente en polvo con propiedades biológicas. Después de cada lavado, mantenga la puerta abierta unos instantes para eliminar la humedad y los olores desagradables. 11.
ESPAÑOL 2. 3. 4. 5. 6. 7. 8. 21 Coloque un recipiente debajo del hueco del filtro para recoger el agua que salga. Gire el filtro hasta que esté en posición vertical. Gire el filtro completamente y extráigalo. Retire la pelusa y los objetos. Limpie el filtro con agua. Vuelva a colocarlo y atorníllelo. Asegúrese de que lo aprieta correctamente para evitar fugas. Cierre la puerta del filtro. 11.6 El filtro del tubo de entrada y el filtro de la válvula ADVERTENCIA • Desenchufe el aparato de la toma de red.
www.aeg.com 6. 7. Vuelva a colocar el tubo de entrada. Cerciórese de que las conexiones están bien apretadas para evitar fugas. Abra el grifo. 90˚ 11.7 Desagüe de emergencia Debido a una avería, el aparato no puede desaguar. Si esto ocurre, realice los pasos 1) a 3) del apartado "Para limpiar el filtro de desagüe". Limpie el filtro si fuera necesario. Vuelva a colocar el conducto de desagüe y cierre la compuerta del filtro. 2.
ESPAÑOL Problema Causa posible 23 Posible solución La manguera de entrada Compruebe que la manguera de agua está dañada. de entrada de agua no está dañada. El aparato no desagua. Los filtros de la manguera de entrada de agua está obstruido. Limpie los filtros. Consulte el capítulo "Mantenimiento y limpieza". El grifo está obstruido o tiene incrustaciones calcáreas. Limpie el grifo. La conexión de la manguera de entrada de agua no es correcta. Compruebe que la conexión es correcta.
www.aeg.com Problema Causa posible El programa no se El aparato no está bien pone en marcha. enchufado a la toma de corriente. Posible solución Conecte el cable a la toma de corriente. Se ha fundido un fusible. Cambie el fusible. No ha pulsado la tecla 4 . Pulse la tecla 4 . Está ajustado el inicio diferido. Para iniciar el programa de lavado de inmediato, cancele el inicio diferido. El bloqueo de seguriDesactive el bloqueo de seguridad para niños está acti- dad para niños. vado.
ESPAÑOL Problema 25 Causa posible Posible solución Se ha ajustado la temperatura incorrecta. Asegúrese de ajustar la temperatura correcta. Demasiada carga de co- Reduzca la carga. lada. Una vez finalizada la revisión, conecte el aparato. El programa continuará a partir del punto en que se haya interrumpido. Si el problema se vuelve a producir, póngase en contacto con el servicio técnico. Si la pantalla muestra otros códigos de alarma, diríjase al servicio técnico. 13.
www.aeg.
ESPAÑOL 27
108755201-A-382012 www.aeg.