EN User Manual Washing Machine L 75475 FL
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 5 4. CONTROL PANEL...........................................................................................................6 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. 2.
ENGLISH • The first time you use the appliance, make sure that there is no leakage. 2.4 Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. • Make sure that you remove all metal objects from the laundry.
www.aeg.com 3.3 Installation on suspended flooring 3.4 Fixing plate kit (4055171146) Suspended wooden floors are particularly susceptible to vibration. Available from your authorized dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws, the wood panel must extend beyond the front feet.
ENGLISH Temperature area: Temperature indicator A Cold water indicator. Spin area: Spin speed indicator B No Spin indicator1) Rinse Hold indicator 1) Only available for Spin/Drain programme. Display indicators: Washing phase Rinses phase Spin phase C Child safety lock Door locked You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off.
www.aeg.com 5. PROGRAMMES 5.1 Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Washing programmes Cottons 95°C - Cold Cottons + Prewash 95°C - Cold 7 kg 1400 rpm White cotton and coloured cotton. Normal soil and light soil. 7 kg 1400 rpm White cotton and coloured cotton. Heavy soil and normal soil. 7 kg White and coloured cotton. Normal soil and light soil.
ENGLISH Programme Temperature range Curtains 40°C - Cold Jeans 60°C - Cold Quick Intensive 60°C - 40°C 20 Min. - 3 Kg 40°C - 30°C Super Eco Cold Cottons Eco6) 60°C - 40°C 9 Maximum load Maximum spin speed Programme description (Type of load and soil level) 3 kg 800 rpm Special programme for curtains. The prewash phase 7 kg 1200 rpm Items in denim and jersey. Also for dark coloured items.
www.aeg.com Programme options compatibility Programme Stain Spin s1) Extra Time Rinse 2) Save 3) Delay Start Cottons ■ ■ ■ ■ ■ ■ Cottons + Prewash ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Extra Silent Synthetics ■ ■ ■ ■ ■ ■ Synthetics + Prewash ■ ■ ■ ■ ■ ■ Easy Iron ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ Wool/Silk ■ ■ Spin/Drain ■ Rinse ■ ■ ■ ■ Curtains ■ ■ ■ ■ Jeans ■ ■ ■ ■ Quick Intensive ■ ■ ■ ■ 20 Min.
ENGLISH 11 At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme duration is automatically calculated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g. Cotton 60°C, maximum load capacity 7 kg, the programme duration exceeds 2 hours; real load 1 kg, the programme duration don’t reach 1 hour). When the appliance is calculating the real programme duration a dot blinks in the display.
www.aeg.com 7.2 Child Lock With this option you can prevent that the children play with the control panel. • To activate/deactivate this option, press Temp. and Spin at the same comes on/ time until the indicator goes off. You can activate this option: • After you press Start/Pause : the options and the programme knob are locked. • Before you press Start/Pause : the appliance cannot start. 7.3 Permanent Extra Rinse With this option you can permanently have an extra rinse when you set a new programme.
ENGLISH 8.8 Temperature regularly to prevent the laundry creases. • The door stays locked. You must drain the water to unlock the door. Set this option to change the default temperature. • The display shows the indicator Indicator . To drain the water refer to ‘At the end of the programme’. 13 = cold water. The display shows the set temperature. 9. BEFORE FIRST USE 1. Put 2 litre of water in the detergent compartment for washing phase. This activates the drain system. 2.
www.aeg.com 10.3 Filling the detergent and additives 1 2 3. To use powder detergent, turn the flap up. A Compartment for prewash phase an soak programme. Compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives. Compartment for stain remover. Flap for powder or liquid detergent. Always obey the instructions that you find on the packaging of the detergent products. 10.4 Check the position of the flap 1.
ENGLISH With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit showed in the flap. • Do not set the prewash phase. • Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser. Make sure that the flap does not cause a blockage when you close the drawer. 10.5 Setting a programme 1.
www.aeg.com 10.10 Interrupting a programme and changing a function You can change only some options before they operate. 1. Press button Start/Pause. The related indicator flashes. 2. Change the function set. 3. Press the button Start/Pause again. The programme continues. In the display Before starting the new programme the appliance drains the water. Make sure that the detergent is still in the detergent compartment, if not fill the detergent again. 10.
ENGLISH 10.15 AUTO Stand-by option The AUTO Stand-by option automatically deactivates the appliance to decrease the energy consumption when: • You do not use the appliance for 5 minutes before you press Start/Pause button. Press the button On/Off to activate the appliance again. 17 • After 5 minutes from the end of the washing programme Press the button On/Off to activate the appliance again. The display shows the end of the last set programme. Turn the programme knob to set a new cycle. 11.
www.aeg.com 11.4 Ecological hints • Set a programme without the prewash phase to wash laundry with normal soil. • Always start a washing programme with the maximum load of laundry. • If necessary, use a stain remover when you set a programme with a low temperature. • To use the correct quantity of the detergent, check the water hardness of your domestic system use a water softener for washing machines. In areas where the water hardness is soft it is not necessary to use a water softener.
ENGLISH 12.5 Cleaning the detergent dispenser 1. 2. 1 2 3. 4. 12.6 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot. 1. 2.
www.aeg.com 3. 4. 1 5. 2 6. 1 2 7. 8. 1 2 9.
ENGLISH 21 12.7 Cleaning the inlet hose and the valve filter 1. 2. 1 2 3 3. 4. 45° 20° 12.8 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1.
www.aeg.com 13. TROUBLESHOOTING • - The appliance does not drain the water. • The start of the appliance does not occur or it stops during operation. - The appliance door is open or not closed correctly. Please check the door! • First try to find a solution to the problem (refer to the table). If not, contact the Authorised Service Centre. - The mains supply is unstable. Wait until the mains supply is stable. • - The anti-flood device is on. Disconnect the appliance and close the water tap.
ENGLISH Problem Possible solution The appliance does not drain the water. Make sure that the sink spigot is not clogged. 23 Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Make sure that the connection of the drain hose is correct. Set the drain programme if you set a programme without drain phase. Set the drain programme if you set an option which ends with water in the tub.
www.aeg.com Problem Possible solution The cycle is shorter than the time displayed. The appliance calculates a new time according to the laundry load. See the ‘Consumption Values’ chapter. The cycle is longer than the time displayed. An unbalanced laundry load increases the duration time. This is a normal behaviour of the appliance. The washing results are not satisfactory. Increase the detergent quantity or use a different detergent.
ENGLISH 25 5. Take out the laundry and then close the appliance door. 6. Close the filter flap. 15.
www.aeg.
ENGLISH 27
132905070-A-152014 www.aeg.