Instruction Manual

With the plastic hose guide.
On the edge of a sink.
Make sure that the plastic guide can-
not move when the appliance drains.
Attach the guide to the water tap or
the wall.
To a stand pipe with vent-hole.
Refer to the illustration. Directly into a
drain pipe at a height of not less than
60 cm (23.6”) and not more than 100
cm (39.3”). The end of the drain hose
must always be ventilated , i.e. the in-
ner diameter of the drainpipe (min. 38
mm — min. 1.5”) must be larger than
the external diameter of the drain
hose.
If the end of the drain hose is this (see
the drawing), you can push it directly
into the stand pipe.
34
www.aeg.com