L76275SL USER MANUAL DE Benutzerinformation Waschmaschine
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE............................................................................................. 3 2. SICHERHEITSANWEISUNGEN...................................................................................5 3. GERÄTEBESCHREIBUNG........................................................................................... 7 4. BEDIENFELD................................................................................................................8 5.
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Bei Verletzungen oder Schäden infolge nicht ordnungsgemäßer Montage oder Verwendung des Geräts übernimmt der Hersteller keine Haftung. Bewahren Sie die Anleitung immer an einem sicheren und zugänglichen Ort zum späteren Nachschlagen auf. 1.
www.aeg.com • Kinder dürfen keine Reinigung und Wartung ohne Beaufsichtigung durchführen. 1.2 Allgemeine Sicherheit • • • • • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor. Dieses Gerät ist für die Verwendung im Haushalt und ähnliche Zwecke vorgesehen, wie z. B. – Personalküchenbereiche in Geschäften, Büros und anderen Arbeitsumfeldern – Für Gäste in Hotels, Motels, Pensionen und anderen wohnungsähnlichen Räumlichkeiten.
DEUTSCH • 5 Reinigen Sie das Gerät mit einem feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger. Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände. 2. SICHERHEITSANWEISUNGEN 2.1 Montage Die Montage muss gemäß den einschlägigen nationalen Vorschriften erfolgen. • Entfernen Sie alle Verpackungsmaterialien, die Transportschrauben sowie die Gummibuchse und den Abstandshalter aus Kunststoff.
www.aeg.com • Fassen Sie das Netzkabel oder den Netzstecker nicht mit nassen Händen an. • Ziehen Sie nicht am Netzkabel, wenn Sie das Gerät von der Stromversorgung trennen möchten. Ziehen Sie stets am Netzstecker. • Das Gerät entspricht den ECRichtlinien. 2.3 Wasseranschluss • Achten Sie darauf, die Wasserschläuche nicht zu beschädigen. • Bevor Sie neue oder lange Zeit nicht benutzte Schläuche, an denen Reparaturarbeiten ausgeführt wurden oder neue Geräte (Wasserzähler usw.
DEUTSCH 7 3. GERÄTEBESCHREIBUNG 3.1 Geräteübersicht 1 2 3 4 5 1 2 3 4 5 6 7 Arbeitsplatte Waschmittelschublade Bedienfeld Türgriff Typenschild Sieb der Ablaufpumpe Füße für die Ausrichtung des Geräts 6 7 3.2 Einschalten der Kindersicherung Diese Vorrichtung sorgt dafür, dass Kinder oder Haustiere nicht in der Trommel eingeschlossen werden können. Drehen Sie die Vorrichtung im Uhrzeigersinn, bis sich die Einkerbung in waagerechter Lage befindet. Die Tür lässt sich nicht schließen. 3.
www.aeg.com 4. BEDIENFELD 4.1 Bedienfeldbeschreibung 1 2 3 Baumwolle Eco Super Eco Koch/Bunt 20 Min. - 3 kg Extra Leise Schnell Intensiv Pflegeleicht + Vorwäsche Jeans + Vorwäsche Gardinen Leichtbügeln Spülen Schleudern/ Pumpen Auto Off Feinwäsche Wolle/ Seide Temp. 10 1 Taste Ein/Aus (Auto Off) 2 Programmwahlschalter 3 Display 4 Taste Start/Pause (Start/Pause) 5 Taste Zeitvorwahl (Zeitvorwahl) U./Min.
DEUTSCH 9 Schleuderdrehzahlbereich: Anzeige Schleuderdrehzahl B Anzeige Kein Schleudern1) Anzeige Spülstopp 1) Nur verfügbar für das Programm Schleudern/Abpumpen. Display/Anzeigen: Hauptwaschgang Spülgänge Schleudergang Kindersicherung C Tür verriegelt Sie können die Gerätetür nicht öffnen, solange dieses Symbol leuchtet. Wenn das Symbol blinkt, kann die Gerätetür nicht geöffnet werden. Warten Sie mit dem Öffnen der Tür, bis das Symbol erlischt.
www.aeg.com 5. PROGRAMME 5.1 Programmübersicht Programm Temperaturbereich Maximale Bela- Programmbeschreibung dung (Beladung und Verschmutzungsgrad) Referenzschleuderdrehzahl Waschprogramme Koch/Bunt 95 °C – kalt 6.5 kg 1200 U/min 6.5 kg Koch/Bunt + Vor- 1200 U/min wäsche 95 °C – kalt Pflegeleicht + Vorwäsche 60 °C – kalt Leichtbügeln 60 °C – kalt Feinwäsche 40 °C – kalt Wolle/Seide 40 °C – kalt Schleudern/ Pumpen3) Weiße und bunte Baumwollwäsche. Stark und normal verschmutzt. 6.
DEUTSCH Programm Temperaturbereich Spülen Gardinen 40 °C – kalt Jeans 60 °C – kalt Schnell Intensiv 60 °C - 40 °C 20 Min. - 3 kg 40 °C - 30 °C Super Eco Kalt 11 Maximale Bela- Programmbeschreibung dung (Beladung und Verschmutzungsgrad) Referenzschleuderdrehzahl 6.5 kg 1200 U/min Spülen und Schleudern der Wäsche. Alle Gewebearten, außer Wollwäsche und empfindliche Feinwäsche. Verringern Sie die Schleuderdrehzahl je nach Wäscheart. 2 kg 800 U/min Sonderprogramm für Gardinen. Der Vorwaschgang 6.
www.aeg.com Programm Temperaturbereich Baumwolle Eco6) 60 °C - 40 °C Maximale Bela- Programmbeschreibung dung (Beladung und Verschmutzungsgrad) Referenzschleuderdrehzahl Weiße und farbechte Baumwollwäsche. Normal verschmutzt. Der Energieverbrauch verringert sich und die Dauer des Waschprogramms wird verlängert, um gute Waschergebnisse sicherzustellen. 6.
DEUTSCH Programm 13 Zeitvorcken1) Spülen 2)Sparen 3) wahl Fle- U./ Min. Extra Zeit Spülen ■ ■ ■ ■ Gardinen ■ ■ ■ ■ Jeans ■ ■ ■ ■ Schnell Intensiv ■ ■ ■ ■ 20 Min. - 3 kg ■ Super Eco ■ ■ Baumwolle Eco ■ ■ ■ ■ ■ ■ ■ ■ 4) ■ 1) Die Flecken-Option ist bei Temperaturen unter 40 °C nicht verfügbar. 2) Ist die Funktion Extra Spülen eingeschaltet, führt das Gerät zusätzliche Spülgänge aus.
www.aeg.com Programme Beladung Energiever(kg) brauch (kWh) Wasserverbrauch (Liter) Ungefähre Programmdauer (in Minuten) Restfeuchte (%)1) Koch/Bunt 60 °C 6.5 1.15 62 166 53 Koch/Bunt 40 °C 6.5 0.75 62 165 53 Pflegeleicht 40 °C 3 0.45 45 110 35 Feinwäsche 40 °C 3 0.6 62 91 35 Wolle/Seide2) 30 °C 1 0.25 50 58 30 Standardprogramme Baumwolle Standardprogramm Baumwolle 60 °C 6.5 0.81 51 190 53 Standardprogramm Baumwolle 60 °C 3.25 0.
DEUTSCH 7.2 Kindersicherung Diese Option verhindert, dass Kinder mit dem Bedienfeld spielen. • Drücken Sie zum Ein-/Ausschalten dieser Option Temp. und U./Min. gleichzeitig, bis die Anzeige aufleuchtet/erlischt. Sie können diese Option einschalten: • Nachdem Sie Start/Pause gedrückt haben: Die Optionen und der Programmwahlschalter sind gesperrt. • Bevor Sie Start/Pause drücken: Das Gerät kann nicht starten. 15 7.
www.aeg.com Zusätzliche Schleuderoptionen: Kein Schleudern • Wählen Sie diese Option zum Unterdrücken aller Schleudergänge. • Stellen Sie diese Option für Feinwäsche ein. • Als Ausgleich dafür, dass nicht geschleudert wird, wird in der Spülphase bei einigen Waschprogrammen mehr Wasser verwendet. • Auf dem Display erscheint die Anzeige Spülstopp . • Stellen Sie diese Option ein, um Knitterfalten zu verringern. • Das Waschprogramm ist beendet, aber es steht Wasser in der Trommel.
DEUTSCH Achten Sie darauf, nicht zu viel Wäsche einzufüllen. 4. Drücken Sie die Tür fest zu. 17 Halten Sie sich immer an die Anweisungen auf der Verpackung der Waschmittelprodukte. 10.4 Überprüfen Sie die Position der Klappe 1. Ziehen Sie die Waschmittelschublade bis zum Anschlag heraus. 2. Drücken Sie den Hebel nach unten und ziehen Sie die Schublade heraus. VORSICHT! Achten Sie darauf, dass keine Wäschestücke zwischen der Dichtung und der Tür feststecken.
www.aeg.com B Programmdauer, oder fügen Sie zur Auswahl stehende Optionen hinzu. Die Anzeige der gewählten Option leuchtet auf, sobald die Option eingeschaltet wird. Wenn Sie einen Fehler machen, erscheint im Display die Meldung Err. 10.6 Starten eines Programms ohne Zeitvorwahl Klappe in der Position „Unten“: • Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. • Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Markierungslinie auf der Klappe.
DEUTSCH Sie können die Einstellung der Zeitvorwahl vor dem Einschalten des Geräts mit der Taste Start/Pause jederzeit abbrechen oder ändern. 10.9 Abbrechen der Zeitvorwahl Abbrechen der Zeitvorwahl: 1. Drücken Sie die Taste Start/Pause, um die Maschine in den Pausenmodus zu schalten. Die zugehörige Kontrolllampe blinkt. 2. Drücken Sie die Taste Zeitvorwahl wiederholt, bis im Display angezeigt wird. 3. Drücken Sie die Taste Start/Pause erneut, um das Programm sofort zu starten. 10.
www.aeg.com Im Display leuchtet Türverriegelung und die Anzeige erlischt. Die Kontrolllampe der Taste Start/Pause erlischt. 1. Drücken Sie die Taste Auto Off, um das Gerät auszuschalten. Fünf Minuten nach Ende des Programms schaltet die Energiesparfunktion das Gerät automatisch aus. Wenn Sie das Gerät wieder einschalten, sehen Sie im Display das Ende des letzten Programms. Drehen Sie den Programmwahlschalter, um ein neues Programm einzustellen. 2. Nehmen Sie die Wäsche aus dem Gerät. 3.
DEUTSCH • Waschen Sie weiße und bunte Wäsche nicht zusammen. • Manche farbigen Textilien können beim ersten Waschen färben. Wir empfehlen, sie deshalb die ersten Male separat zu waschen. • Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Schließen Sie Gürtel. • Leeren Sie die Taschen und falten Sie die Wäscheteile auseinander. • Wenden Sie mehrlagige Textilien, Wolle und bedruckte Wäschestücke vor dem Waschen.
www.aeg.com Wenden Sie sich an Ihr örtliches Wasserversorgungsunternehmen, um die Wasserhärte in Ihrem Gebiet zu erfahren. Anweisungen auf der Verpackung des Produkts. Verwenden Sie die richtige Menge Wasserenthärter. Halten Sie sich an die 12. REINIGUNG UND PFLEGE WARNUNG! Siehe Kapitel Sicherheitshinweise. 12.1 Reinigen der Außenseiten Reinigen Sie das Gerät nur mit warmem Wasser und mit etwas Spülmittel. Reiben Sie alle Oberflächen sorgfältig trocken.
DEUTSCH 12.5 Reinigen der Waschmittelschublade 1. 2. 3. 4. 12.6 Reinigen des Ablaufsiebs Reinigen Sie das Ablaufsieb nicht, wenn das Wasser im Gerät heiß ist. Kontrollieren Sie regelmäßig das Ablaufpumpensieb und sorgen Sie dafür, dass es sauber ist. Wiederholen Sie die Schritte 2 und 3, bis kein Wasser mehr herausfließt.
www.aeg.com 1. 2. 180° 3. 4. 2 2 1 1 5. 6. 7. 8.
DEUTSCH Halten Sie einen Lappen bereit, um verschüttetes Wasser aufzuwischen. 25 Prüfen Sie, ob sich das Flügelrad der Pumpe drehen lässt. Ist dies nicht möglich, wenden Sie sich an den autorisierten Kundendienst. Achten Sie auch darauf, dass Sie das Sieb richtig fest anziehen, um Wasserlecks zu vermeiden. 12.7 Reinigen des Siebs des Zulaufschlauchs und Ventils 1. 2. 1 2 3 3. 4. 45° 20° 12.8 Notentleerung Das Gerät kann aufgrund einer Funktionsstörung das Wasser nicht abpumpen.
www.aeg.com 2. Schließen Sie den Wasserhahn. 3. Stecken Sie die beiden Enden des Zulaufschlauchs in einen Behälter und lassen Sie das Wasser aus dem Schlauch fließen. 4. Leeren Sie die Ablaufpumpe. Siehe Notentleerungsverfahren. 5. Befestigen Sie den Zulaufschlauch wieder, wenn die Ablaufpumpe entleert ist. WARNUNG! Stellen Sie sicher, dass die Temperatur über 0 °C liegt, bevor Sie das Gerät wieder einschalten.
DEUTSCH 27 13.2 Mögliche Störungen Störung Mögliche Abhilfe Das Programm startet nicht. • Vergewissern Sie sich, dass der Netzstecker in die Netzsteckdose eingesteckt ist. • Achten Sie darauf, dass die Gerätetür geschlossen ist. • Vergewissern Sie sich, dass im Sicherungskasten keine Sicherung ausgelöst hat. • Überzeugen Sie sich, dass Start/Pause gedrückt wurde. • Wenn die Zeitvorwahl eingestellt ist, brechen Sie die Zeitvorwahl ab oder warten Sie, bis sie abgelaufen ist.
www.aeg.com Störung Mögliche Abhilfe Das Gerät schleudert nicht oder das Waschprogramm dauert länger als gewöhnlich. • Stellen Sie die Option Schleudern ein. • Haben Sie ein Programm mit Spülstopp gewählt, stellen Sie das Abpumpprogramm ein. • Vergewissern Sie sich, dass das Ablaufsieb nicht verstopft ist. Reinigen Sie ggf. das Sieb. Siehe „Reinigung und Pflege“. • Verteilen Sie die Wäschestücke mit der Hand neu und starten Sie die Schleuderphase erneut.
DEUTSCH 29 Schalten Sie das Gerät nach der Überprüfung wieder ein. Das Programm wird an der Stelle fortgesetzt, an der es unterbrochen wurde. Tritt das Problem erneut auf, wenden Sie sich an den autorisierten Kundendienst. Wenn im Display andere Alarmcodes angezeigt werden. Schalten Sie das Gerät aus und wieder ein. Tritt das Problem weiterhin auf, wenden Sie sich an den autorisierten Kundendienst. 14.
www.aeg.com Energierverbrauch in kWh/Jahr auf der Grundlage von 220 Standard-Waschzyklen für 60 °C und 40 °C Baumwollprogramme bei vollständiger Befüllung und Teilbefüllung sowie dem Verbrauchs der Betriebsarten mit geringer Leistungsaufnahme. Der tatsächliche Energieverbrauch hängt von der Art der Nutzung des Geräts ab. 151 Energieverbrauch des Standardprogramms „Baumwolle 60 °C“ bei vollständiger Befüllung in kWh 0.
DEUTSCH 31 Die in der Tabelle oben enthaltenen Informationen erfüllen die Verordnung (EU) 1015/2010 der Kommission zur Durchführung der Richtlinie EG/2009/125. 16. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte. Entsorgen Sie * Geräte mit diesem Symbol nicht mit dem Hausmüll.
132923464-A-322018 www.aeg.