Owner manual

Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex-
cept where the low voltage equipment has no pro-
tection against moisture
IPX4
Water supply pressure
1)
Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Water supply
2)
Cold water
Maximum load Cotton 8 kg
Spin speed Maximum 1200 rpm (L76285FL)
1400 rpm (L76485FL)
1)
The appliance works correctly if the water pressure is not less than 0.05 MPa (0.5 bar).
If you can not connect the water inlet hose to the cold water tap of the primary hydraulic
system, connect it to your domestic cold water storage system.
Make sure not to have more than a distance of 5.02 m (16.5 ft) between the appliance
inlet hose and the bottom of the water storage tank.
2)
Connect the water inlet hose to a water tap with a 3/4'' thread.
4. PRODUCT DESCRIPTION
1 2 3 8
9
5
6
7
4
1
0
1
1
1
2
1
Worktop
2
Detergent dispenser
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump
7
Feet for the appliance level
8
Water drain hose
9
Water inlet valve
10
Mains cable
11
Transit bolts
12
Feet for the appliance level
6
www.aeg.com