User manual

Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption (li-
tre)
Approximate pro-
gramme duration
(minutes)
Cottons 60°C 8 1.35 67 175
Coton Eco
Cotton Energy Saving Pro-
gramme 60°C
1)
8 1.07 63 241
Cottons 40°C 8 0.85 67 170
Synthetics 40°C 3.5 0.40 48 115
Delicates 40°C 3.5 0.50 55 80
Wool/Handwash 30°C 1.5 0.25 45 60
1)
«Cotton Energy Saving programme » at 60°C with a load of 8kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.
7. OPTIONS
7.1 Temp.
Set this option to change the default
temperature.
Indicator = cold water.
The display shows the set temperature.
7.2 Essorage
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
Set this option to remove all spin
phases.
Set it for very delicate fabrics.
To compensate for the absence of
spinning, the rinse phase uses more
water for some washing programmes.
The display shows the indicator
.
Rinse Hold
Set this option to reduce creasing.
The washing programme ends with
water in the drum. The drum turns
regularly to reduce creasing.
The door stays locked. You must drain
the water to unlock the door.
The display shows the indicator .
To drain the water refer to
"Draining water out after
end of cycle".
7.3 Niveau Séchage
Press this button to set one of 3
automatic dryness levels available. The
display shows the symbol of the set level:
Iron dry – laundry to be ironed
Cupboard dry – laundry to be put
in storage
Extra dry – laundry to be fully
dried
You cannot set all
automatic levels for each
type of fabric.
7.4 Minuterie
Press this button to set the time that suits
the fabrics you have to dry. The display
shows the set value.
Each time you press this button the time
value increases by 5 minutes.
ENGLISH
15