User manual

6. CONSUMPTION VALUES
The data of this table are approximate. Different causes can change the
data: the quantity and type of laundry, the water and ambient tempera-
ture.
At programme start the display shows the duration programme for the
maximum load capacity. During the washing phase the programme du-
ration is automatically calculated and can be greatly reduced if the laun-
dry load is lower than the maximum load capacity (e.g. Cotton 60°C,
maximum load capacity 8 kg, the programme duration exceeds 2 hours;
real load 1 kg, the programme duration don’t reach 1 hour). When the
appliance is calculating the real programme duration a dot blinks in the
display.
Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption (li-
tre)
Approximate pro-
gramme duration
(minutes)
Cottons 60 °C 8 1.35 67 175
Cottons Eco
Cotton Energy Saving Pro-
gramme 60 °C
1)
8 1.00 63 225
Cottons 40 °C 8 0.85 67 170
Synthetics 40 °C 3 0.40 48 115
Delicates 40 °C 3 0.50 55 80
Wool/Handwash 30 °C 1.5 0.25 45 60
1)
«Cotton Energy Saving programme » at 60°C with a load of 8 kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.
7. OPTIONS
7.1 Temperature
Set this option to change the default
temperature.
Indicator = cold water.
The display shows the set temperature.
7.2 Spin
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
Additional spin options:
No Spin
• Set this option to remove all spin
phases.
• Set it for very delicate fabrics.
• The rinse phase uses more water for
some washing programmes.
• The display shows the indicator
.
Rinse Hold
• Set this option to prevent the laundry
creases.
www.aeg.com14