User manual

6. CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand-
ards. Different causes can change the data: the quantity and type of
laundry and ambient temperature. Water pressure, the supply voltage
and the temperature of inlet water may also affect the washing pro-
gramme duration.
Technical specifications may be changed without prior notice to improve
the quality of product.
At the start of the programme, the display shows the programme dura-
tion for the maximum load capacity.
During the washing phase the programme duration is automatically cal-
culated and can be greatly reduced if the laundry load is lower than the
maximum load capacity (e.g. Cotton 60°C, maximum load capacity 8 kg,
the programme duration exceeds 2 hours; actual load 1 kg, the pro-
gramme duration will be less than 1 hour).
When the appliance is calculating the real programme duration a dot
flashes in the display.
Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption (li-
tre)
Approximate pro-
gramme duration
(minutes)
Cottons 60°C 8 1.60 72 168
Cottons Eco
Cotton Energy Saving Pro-
gramme 60°C
1)
8 1.03 57 220
Cottons 40°C 8 1.00 72 164
Synthetics 40°C 4 0.60 50 110
Delicates 40°C 4 0.70 60 91
Wool/Handwash 30°C 1,5 0.35 57 58
1)
«Cotton Energy Saving programme » at 60°C with a load of 8kg is the reference programme for the
data entered in the energy label, in compliance with EEC 92/75 standards.
7. OPTIONS
7.1 Temperature
Set this option to change the default
temperature.
Indicator = cold water.
The display shows the set temperature.
7.2 Spin
With this option you can decrease the
default spin speed.
The display shows the indicator of the set
speed.
ENGLISH 15