L 76489 FL L 76689 FL DE Benutzerinformation
www.aeg.com INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TECHNISCHE DATEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ZUBEHÖR . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage oder Verwendung Schäden verursacht.
www.aeg.com Ein falsch eingesetzter Filter führt zu Wasserlecks. 1.5 Montage • Das Gerät ist schwer, Vorsicht beim Transport. • Transportieren Sie das Gerät nicht ohne die Transportschrauben. Sonst könnten innere Bauteile beschädigt und Lecks oder Betriebsstörungen verursacht werden. • Schließen Sie ein beschädigtes Gerät nicht an. • Achten Sie darauf, sämtliche Verpackungsmaterialien und Transportschrauben zu entfernen.
DEUTSCH 5 2. TECHNISCHE DATEN Abmessungen Breite / Höhe / Tiefe Elektrischer Anschluss: 600 / 850 / 605 mm Gesamttiefe 640 mm Spannung Gesamtleistung Sicherung Frequenz 230 V 2200 W 10 A 50 Hz Die Schutzklasse gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt Wasserdruck IPX4 Min. 0,5 bar (0,05 MPa) Max.
www.aeg.com 10 Netzkabel 12 Schraubfüße zum Ausrichten des Geräts 11 Transportschrauben 4. ZUBEHÖR 1 1 Schraubenschlüssel 2 Zum Lösen der Transportschrauben. 2 Kunststoffkappen 4 Zum Verschließen der Öffnungen auf der Rückseite des Geräts nach dem Entfernen der Transportschrauben. 3 Aquasafe-Zulaufschlauch Zur Verhinderung von eventuellen Wasserlecks. 4 Kunststoff-Schlauchführung Zum Einhängen des Ablaufschlauchs an einer Waschbeckenkante. 3 5.
DEUTSCH matisch aus, um den Energieverbrauch zu verringern: • Wenn Sie nicht innerhalb von 5 Minuten die Taste 4 drücken. – Alle Einstellungen werden gelöscht. – Drücken Sie die Taste 1 , um das Gerät wieder einzuschalten. – Stellen Sie das Waschprogramm und die gewünschten Funktionen erneut ein. • 5 Minuten nach dem Ende des Waschprogramms. Siehe „Am Programmende“. 5.2 Programmwahlschalter 2 Drehen Sie diesen Schalter, um ein Programm einzustellen. Die entsprechende Programmanzeige leuchtet auf. 5.
www.aeg.com D • Programmdauer Wenn das Programm beginnt, verringert sich die angezeigte Zeit in Minutenschritten. • Zeitvorwahl-Dauer Wenn Sie die Zeitvorwahl-Taste drücken, zeigt das Display die verbleibende Zeit bis zum Programmstart an. • Alarmcodes Bei einer Störung des Geräts erscheinen im Display Alarmcodes. Siehe Abschnitt „Fehlersuche“. • Err „Err“ erscheint einige Sekunden lang im Display, wenn: – Sie eine Funktion auswählen, die nicht mit dem eingestellten Waschprogramm kombinierbar ist.
DEUTSCH • Verringern der maximalen Schleuderdrehzahl bei der Einstellung eines Programms. Das Display zeigt nur die Schleuderdrehzahlen, die mit dem eingestellten Programm verfügbar sind. • Schalten Sie den Schleudergang aus. • Aktivieren Sie die Spülstopp-Funktion. Stellen Sie diese Funktion ein, um Knitterfalten zu vermeiden. Das Gerät pumpt das Wasser am Ende des Programms nicht ab. Die Schleuderphase ist ausgeschaltet. Die Spülstopp-Funktion ist eingeschaltet. 5.
www.aeg.com 6. PROGRAMME Programm Temperatur Beladung Max. Beladung Programmbeschreibung Funktionen Koch/Bunt 95 °C - Kalt Weiße und bunte Baumwolle, normal verschmutzt. Max. 8 kg Hauptwaschgang Spülgänge Langer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP FLECKEN EXTRA SPÜLEN ZEITSPAREN1) Koch/Bunt + Vorwäsche 95 °C - Kalt Weiße und bunte Baumwolle, stark verschmutzt. Max.
DEUTSCH 11 Programm Temperatur Beladung Max. Beladung Programmbeschreibung Daunen 60° - 30° Eine einzelne Decke aus Synthetik, Bettdecke, Bettlaken usw. Max. 2.5 kg Hauptwaschgang DREHZAHLRESpülgänge DUZIERUNG Kurzer Schleudergang Schleudern/ Pumpen3) Alle Gewebearten Die maximale Beladung hängt vom Wäschetyp ab. Abpumpen des Wassers Schleudergang mit maximaler Drehzahl. DREHZAHLREDUZIERUNG OHNE SCHLEUDERN SpülenKalt Mit der Hand gewaschene Teile.
www.aeg.com 6) Standardprogramme für die auf dem Energie-Label angegebenen Verbrauchswerte. Die Programme „Baumwolle Eco 60 °C“ und „Baumwolle Eco 40 °C“ sind gemäß Verordnung 1061/2010 die Standardprogramme „Baumwolle 60 °C“ bzw. „Baumwolle 40 °C“. Stellen Sie diese Programme ein, wenn Sie gute Waschergebnisse erzielen und den Energieverbrauch senken möchten. Die Dauer des Waschprogramms wird dadurch verlängert. DAMPFPROGRAMME Programm1) Beladung Max.
DEUTSCH 13 7. VERBRAUCHSWERTE Die Werte dieser Tabelle sind Richtwerte. Folgende Faktoren können diese Werte verändern: Die Wäscheart und -menge, die Wasser- und Raumtemperatur. Programme Beladung (kg) Energieverbrauch (kWh) Wasserverbrauch (Liter) UngeRestRestfähre feuchte feuchte Pro(%)1) (%)1) gramm- L 76489 L 76689 dauer (in FL FL Minuten) Koch-/Buntwäsche 60 °C 8 1.60 72 168 44 43 Koch-/Buntwäsche 40 °C 8 1.00 72 164 44 43 Pflegeleicht 40 °C 4 0.
www.aeg.com 8. VOR DER ERSTEN INBETRIEBNAHME Zum Aktivieren des Ablaufsystems füllen Sie 2 Liter Wasser in das Hauptfach der Waschmittelschublade. 2. Geben Sie eine kleine Waschmittelmenge in das Hauptfach der Waschmittelschublade. Stellen Sie ein Koch/Buntwäsche-Programm mit der höchsten Temperatur ein und starten Sie das Programm mit leerer Trommel. So werden alle eventuellen Verunreinigungen aus Trommel und Bottich entfernt. 1. 9. GEBRAUCH DES GERÄTS 1. 2. Drehen Sie den Wasserhahn auf.
DEUTSCH 15 Waschmittelfach für die Vorwaschphase und das Einweichprogramm. Füllen Sie das Waschmittel für den Vorwaschgang und das Einweichen vor dem Start des Programms ein. Waschmittelfach für die Waschphase. Wenn Sie Flüssigwaschmittel verwenden, muss dieses direkt vor dem Start des Programms eingefüllt werden. Fach für flüssige Pflegemittel (Weichspüler, Stärke). Füllen Sie das Pflegemittel in das Fach ein, bevor Sie das Programm starten. Das ist die maximale Menge für flüssige Pflegemittel.
www.aeg.com 3. Drehen Sie die Klappe nach oben, wenn Sie Waschpulver verwenden. 4. Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Klappe in der Position „Unten“: – Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. – Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Markierungslinie auf der Klappe. – Stellen Sie nicht den Vorwaschgang ein. – Stellen Sie nicht die Zeitvorwahl ein. 5. 6. Messen Sie Waschmittel und Weichspüler ab.
DEUTSCH 17 9.4 Unterbrechen eines Programms 9.8 Abbrechen der Zeitvorwahl 1. Drücken Sie die Taste 4 . Die Kontrolllampe blinkt. 1. Drücken Sie die Taste 4 . Die zugehörige Kontrolllampe blinkt. 2. Drücken Sie die Taste 4 erneut. Das Waschprogramm wird fortgesetzt. 2. Drücken Sie die Taste 5 wiederholt, bis das Display 0’ anzeigt. 3. Drücken Sie die Taste 4 . Das Programm startet. 9.5 Abbrechen eines Programms 9.9 Öffnen der Tür 1.
www.aeg.com 10. AM PROGRAMMENDE • Das Gerät stoppt automatisch. • Es ertönen akustische Signale. • Im Display erscheint . • Die Kontrolllampe der Start/PauseTaste 4 erlischt. • Das Türverriegelungssymbol erlischt. • Drücken Sie die Taste 1 , um das Gerät auszuschalten. Fünf Minuten nach Ende des Programms schaltet die Energiesparfunktion das Gerät automatisch aus. Wenn Sie das Gerät wieder einschalten, sehen Sie im Display das Ende des letzten Programms.
DEUTSCH 11.2 Hartnäckige Flecken Für manche Flecken sind Wasser und Waschmittel nicht ausreichend. Wir empfehlen, diese Flecken zu entfernen, bevor Sie die entsprechenden Textilien in das Gerät geben. Spezial-Fleckentferner sind im Handel erhältlich. Verwenden Sie einen SpezialFleckentferner, der für den jeweiligen Fleckentyp und Gewebetyp geeignet ist. 11.3 Wasch- und Pflegemittel • Verwenden Sie nur speziell für Waschmaschinen bestimmte Wasch- und Pflegemittel.
www.aeg.com 12.2 Reinigen der Außenseiten Reinigen Sie das Gerät nur mit warmem Wasser und mit etwas Spülmittel. Reiben Sie alle Oberflächen sorgfältig trocken. VORSICHT! Verwenden Sie keinen Alkohol, keine Lösungsmittel und keine Chemikalien. 12.3 Waschgang zur Pflege der Maschine Bei Waschprogrammen mit niedrigen Temperaturen kann etwas Waschmittel in der Trommel zurückbleiben. Führen Sie regelmäßig einen Waschgang zur Pflege der Maschine durch: • Entnehmen Sie die Wäsche aus der Trommel.
DEUTSCH 3. 4. 5. 6. 21 Entfernen Sie den oberen Teil des Pflegemittelfachs. Reinigen Sie alle Teile mit Wasser. Reinigen Sie das leere Einschubfach mit einer Bürste. Schieben Sie die Waschmittelschublade wieder in das Einschubfach ein. WARNUNG! 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Entfernen Sie den Filter nicht, während das Gerät in Betrieb ist. Reinigen Sie die Ablaufpumpe nicht, wenn das Wasser im Gerät heiß ist. Das Wasser muss abgekühlt sein, bevor Sie die Ablaufpumpe reinigen.
www.aeg.com 3. 4. 5. 1 6. 2 2 1 12.8 Zulaufschlauchfilter und Ventilfilter Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein. Stellen Sie einen Behälter unter die Ablaufpumpe, um das auslaufende Wasser aufzufangen. Drücken Sie die zwei Hebel und ziehen Sie den Ablaufkanal nach vorn, um das Wasser auslaufen zu lassen.
DEUTSCH 23 So reinigen Sie die Wasserzulauffilter: Schließen Sie den Wasserhahn. Entfernen Sie den Wasserzulaufschlauch vom Wasserhahn. 3. Reinigen Sie den Filter im Zulaufschlauch mit einer harten Bürste. 1. 2. 4. 5. 6. 20° 45° 7. Entfernen Sie den Zulaufschlauch von der Geräterückseite. Reinigen Sie den Filter im Ventil mit einer harten Bürste oder einem Handtuch. Bringen Sie den Zulaufschlauch wieder an.
www.aeg.com WARNUNG! Vergewissern Sie sich vor einer erneuten Benutzung des Geräts, dass die Temperatur mehr als 0 °C beträgt. Der Hersteller ist nicht verantwortlich für Schäden, die durch niedrige Temperaturen entstanden sind. 13. FEHLERDIAGNOSE Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zunächst eine Lösung für das Problem zu finden (siehe Tabelle). Wenn Sie keine Lösung finden, wenden Sie sich an den Kundendienst. • - Das Gerät pumpt das Wasser nicht ab.
DEUTSCH Problem Mögliche Ursache Mögliche Abhilfe Der Wasserablaufschlauch ist nicht richtig angeschlossen. Vergewissern Sie sich, dass die Schlauchverbindung in Ordnung ist. Ein Waschprogramm ohne Abpumpphase ist eingestellt. Stellen Sie das Abpumpprogramm ein. Die Funktion Spülstopp ist aktiviert. Stellen Sie das Abpumpprogramm ein. 25 Die Gerätetür steht offen oder ist nicht richtig geschlossen. Schließen Sie die Tür richtig. Die Aquasafe-Einrichtung ist aktiv. • Schalten Sie das Gerät aus.
www.aeg.com Problem Mögliche Ursache Mögliche Abhilfe Der Wasserablaufschlauch ist beschädigt. Vergewissern Sie sich, dass der Wasserzulaufschlauch nicht beschädigt ist. Die Tür des GeEin Waschprogramm räts lässt sich nicht läuft. öffnen. Warten Sie das Ende des Waschprogramms ab. Es befindet sich Wasser in der Trommel. Stellen Sie das Abpump- oder Schleuderprogramm ein. Das Gerät ist nicht ausgerichtet. Richten Sie das Gerät waagrecht aus. Siehe hierzu „Montage“.
DEUTSCH 27 14. MONTAGE 14.1 1 Satz Fixierplatten (4055171146) Sie erhalten den Bausatz bei Ihrem Vertragshändler. Wenn Sie das Gerät auf einem Sockel aufstellen, befestigen Sie es mithilfe der Fixierplatten. Lesen Sie aufmerksam die dem Bausatz beiliegende Anleitung. 14.2 Auspacken 1. Verwenden Sie Handschuhe. Entfernen Sie die äußere Folie. Benutzen Sie, falls erforderlich, ein Teppichmesser. 2. Nehmen Sie die Karton-Abdeckung ab. Entfernen Sie die Styropor-Verpackungsteile. 3. 4.
www.aeg.com 5. Öffnen Sie die Tür. Entfernen Sie das Styroporteil aus der Türdichtung und alle Teile aus der Trommel. 6. Legen Sie eines der Styroporverpackungsteile hinter dem Gerät auf den Boden. Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. Achten Sie darauf, die Schläuche nicht zu beschädigen. 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 8. 1 2 9.
DEUTSCH 29 10. Lösen Sie die drei Schrauben. Ver- wenden Sie dazu den mitgelieferten Schraubenschlüssel. 11. Ziehen Sie die Kunststoff-Abstandshalter heraus. 12. Setzen Sie die Kunststoffkappen in die Öffnungen. Diese Kappen finden Sie im Beutel mit der Gebrauchsanleitung. WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren. 14.
www.aeg.com • Das Gerät muss einen waagerechten und festen Stand haben. VORSICHT! Schieben Sie weder Karton noch Holz oder ähnliche Materialien unter die Stellfüße, um das Gerät auszurichten. 14.4 Wasserzulaufschlauch • Schließen Sie den Schlauch am Gerät an. Drehen Sie den Wasserzulaufschlauch nur nach links oder rechts. Lösen Sie die Ringmutter, um ihn in die gewünschte Position zu bewegen.
DEUTSCH 31 Aquastopp-Einrichtung A Der Zulaufschlauch verfügt über eine Wasserstopp-Vorrichtung. Damit werden Wasserlecks am Schlauch, die durch natürliche Alterung auftreten könnten, verhindert. Der rote Bereich im Fenster „A“ zeigt diesen Fehler an. Tritt dieser Fall ein, drehen Sie den Wasserhahn zu und wenden Sie sich an den Kundendienst, um den Schlauch zu erneuern. 14.5 Wasserablauf Es gibt mehrere Möglichkeiten, den Ablaufschlauch anzuschließen: Mit der Kunststoff-Schlauchführung.
www.aeg.com Ohne Kunststoff-Schlauchführung. • An einen Siphon. Orientieren Sie sich an der Abbildung. Stecken Sie den Ablaufschlauch in den Siphon und befestigen Sie ihn mit einer Schlauchschelle. Stellen Sie sicher, dass der Schlauch einen Bogen beschreibt, damit kein Schmutz aus dem Siphon in das Gerät gelangen kann. • Direkte Einleitung in ein Abflussrohr in der Zimmerwand. Mit einer Schlauchschelle befestigen. Sie können den Ablaufschlauch auf maximal 400 cm verlängern.
DEUTSCH 33
www.aeg.
DEUTSCH 35
132923170-A-162012 www.aeg.