L 77484 AFL DE Benutzerinformation LAVAMAT
www.aeg.com INHALT 1. 2. 3. 5. 6. 7. 8. 9. 13. 14. 15. 16. 17. 18. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 TECHNISCHE DATEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 GERÄTEBESCHREIBUNG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 BEDIENFELD . . . . . . . . . . . . . . . . . . . . .
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage oder Verwendung Schäden verursacht.
www.aeg.com Ein falsch eingesetzter Filter führt zu Wasserlecks. 1.5 Montage • Das Gerät ist schwer, Vorsicht beim Transport. • Transportieren Sie das Gerät nicht ohne die Transportschrauben. Sonst könnten innere Bauteile beschädigt und Lecks oder Betriebsstörungen verursacht werden. • Schließen Sie ein beschädigtes Gerät nicht an. • Achten Sie darauf, sämtliche Verpackungsmaterialien und Transportschrauben zu entfernen.
DEUTSCH 5 2. TECHNISCHE DATEN Abmessungen Breite / Höhe / Tiefe Elektrischer Anschluss: 605 / 850 / 605 mm Gesamttiefe 640 mm Spannung Gesamtleistung Sicherung Frequenz 230 V 2200 W 10 A 50 Hz Die Schutzklasse gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt Wasserdruck IPX4 Min. 0,5 bar (0,05 MPa) Max.
www.aeg.com 11 Transportschrauben 12 Schraubfüße zum Ausrichten des Geräts 4. ZUBEHÖRTEILE 1 1 Schraubenschlüssel 2 Zum Lösen der Transportschrauben. 2 Kunststoffkappen 4 Zum Verschließen der Öffnungen auf der Rückseite des Geräts nach dem Entfernen der Transportschrauben. 3 Aquasafe-Zulaufschlauch Zur Verhinderung von eventuellen Wasserlecks. 4 Kunststoff-Schlauchführung Zum Einhängen des Ablaufschlauchs an einer Waschbeckenkante. 3 5.
DEUTSCH • Wenn Sie nicht innerhalb von 5 Minuten die Taste 4 drücken. – Alle Einstellungen werden gelöscht. – Drücken Sie die Taste 1 , um das Gerät wieder einzuschalten. – Stellen Sie das Waschprogramm und die gewünschten Funktionen erneut ein. • 5 Minuten nach dem Ende des Waschprogramms. Siehe „Am Programmende“. 5.2 Programmwahlschalter 2 Drehen Sie diesen Schalter, um ein Programm einzustellen. Die entsprechende Programmanzeige leuchtet auf. 5.
www.aeg.com D • Programmdauer Wenn das Programm beginnt, verringert sich die angezeigte Zeit in Minutenschritten. • Zeitvorwahl-Dauer Wenn Sie die Zeitvorwahl-Taste drücken, zeigt das Display die verbleibende Zeit bis zum Programmstart an. • Alarmcodes Bei einer Störung des Geräts erscheinen im Display Alarmcodes. Siehe Abschnitt „Fehlersuche“. • Err „Err“ erscheint einige Sekunden lang im Display, wenn: – Sie eine Funktion auswählen, die nicht mit dem eingestellten Waschprogramm kombinierbar ist.
DEUTSCH • Verringern der maximalen Schleuderdrehzahl bei der Einstellung eines Programms. Das Display zeigt nur die Schleuderdrehzahlen, die mit dem eingestellten Programm verfügbar sind. • Schalten Sie den Schleudergang aus. • Aktivieren Sie die Spülstopp-Funktion. Stellen Sie diese Funktion ein, um Knitterfalten zu vermeiden. Das Gerät pumpt das Wasser am Ende des Programms nicht ab. Die Schleuderphase ist ausgeschaltet. Die Spülstopp-Funktion ist eingeschaltet. 5.
www.aeg.com 6. PROGRAMME Programm Temperatur Beladung Max. Beladung Programmbeschreibung Funktionen Koch/Bunt 95 °C - Kalt Weiße und bunte Baumwolle, normal verschmutzt. Max. 8 kg Hauptwaschgang Spülgänge Langer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP FLECKEN1) EXTRA SPÜLEN ZEIT SPAREN2) Koch/Bunt + Vorwâsche 95 °C - Kalt Weiße und bunte Baumwolle, stark verschmutzt. Max.
DEUTSCH Programm Temperatur 11 Beladung Max. Beladung Programmbeschreibung Funktionen Waschmaschinenfeste Wolle. Handwaschbare Wolle und Feinwäsche mit dem „Handwäsche“-Pflegesymbol. Max. 2 kg Hauptwaschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP Schleudern / Pumpen4) Alle Gewebe Die maximale Beladung hängt vom Wäschetyp ab. Abpumpen des Wassers Schleudergang mit maximaler Drehzahl.
www.aeg.com Programm Temperatur Beladung Max. Beladung Programmbeschreibung Super Eco6) Kalt Mischfasern (Baum- Hauptwaschgang wolle und Synthetik). Spülgänge Max. 3 kg Langer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP EXTRA SPÜLEN Baumwolle Eco7) 60° - 40° Weiße und farbechte Baumwolle, normal verschmutzt. Max.
DEUTSCH 13 7. VERBRAUCHSWERTE Die Werte dieser Tabelle sind Richtwerte. Folgende Faktoren können diese Werte verändern: Die Wäscheart und -menge, die Wasser- und Raumtemperatur. Programme Beladung (kg) Energieverbrauch (kWh) Wasserverbrauch (Liter) Ungefähre Programmdauer (in Minuten) Restfeuchte (%)1) Koch-/Buntwäsche 60 °C 8 1.5 66 179 44 Koch-/Buntwäsche 40 °C 8 0.9 66 175 44 Pflegeleicht 40 °C 4 0.6 48 110 35 Feinwäsche 40 °C 4 0.7 58 91 35 Wolle/Handwäsche 30 °C 2 0.
www.aeg.com len Verunreinigungen aus Trommel und Bottich entfernt. 9. GEBRAUCH DES GERÄTS 1. 2. Drehen Sie den Wasserhahn auf. Stecken Sie den Netzstecker in die Steckdose. 3. Drücken Sie die Taste 1 , um das Gerät einzuschalten. 4. Legen Sie die Wäsche in das Gerät. 5. Verwenden Sie die richtige Waschmittel- und Pflegemittelmenge. 6. Stellen Sie je nach Wäscheart und Verschmutzungsgrad das passende Waschprogramm ein. 10. EINFÜLLEN DER WÄSCHE 1. 2. Öffnen Sie die Tür des Geräts.
DEUTSCH 15 11. EINFÜLLEN VON WASCH- UND PFLEGEMITTELN Waschmittelfach für die Vorwaschphase und das Einweichprogramm. Füllen Sie das Waschmittel für den Vorwaschgang und das Einweichen vor dem Start des Programms ein. Waschmittelfach für die Waschphase. Wenn Sie Flüssigwaschmittel verwenden, muss dieses direkt vor dem Start des Programms eingefüllt werden. Fach für flüssige Pflegemittel (Weichspüler, Stärke). Füllen Sie das Pflegemittel in das Fach ein, bevor Sie das Programm starten.
www.aeg.com 3. Drehen Sie die Klappe nach oben, wenn Sie Waschpulver verwenden. 4. Drehen Sie die Klappe nach unten, wenn Sie Flüssigwaschmittel verwenden. Klappe in der Position „Unten“: – Verwenden Sie keine Gelwaschmittel oder Flüssigwaschmittel mit dicker Konsistenz. – Füllen Sie nicht mehr Flüssigwaschmittel ein als bis zur Markierungslinie auf der Klappe. – Stellen Sie nicht den Vorwaschgang ein. – Stellen Sie nicht die Zeitvorwahl ein. 5. 6. Messen Sie Waschmittel und Weichspüler ab.
DEUTSCH 17 12.1 Unterbrechen eines Programms 12.5 Abbrechen der Zeitvorwahl 1. Drücken Sie die Taste 4 . Die Kontrolllampe blinkt. 1. Drücken Sie die Taste 4 . Die zugehörige Kontrolllampe blinkt. 2. Drücken Sie die Taste 4 erneut. Das Waschprogramm wird fortgesetzt. 2. Drücken Sie die Taste 5 wiederholt, bis das Display 0’ anzeigt. 3. Drücken Sie die Taste 4 . Das Programm startet. 12.2 Abbrechen eines Programms 12.6 Öffnen der Tür 1.
www.aeg.com 13. AM PROGRAMMENDE • Das Gerät stoppt automatisch. • Es ertönen akustische Signale. • Im Display erscheint . • Die Kontrolllampe der Start/PauseTaste 4 erlischt. • Das Türverriegelungssymbol erlischt. • Drücken Sie die Taste 1 , um das Gerät auszuschalten. Fünf Minuten nach Ende des Programms schaltet die Energiesparfunktion das Gerät automatisch aus. Wenn Sie das Gerät wieder einschalten, sehen Sie im Display das Ende des letzten Programms.
DEUTSCH 14.2 Hartnäckige Flecken Für manche Flecken sind Wasser und Waschmittel nicht ausreichend. Wir empfehlen, diese Flecken zu entfernen, bevor Sie die entsprechenden Textilien in das Gerät geben. Spezial-Fleckentferner sind im Handel erhältlich. Verwenden Sie einen SpezialFleckentferner, der für den jeweiligen Fleckentyp und Gewebetyp geeignet ist. 14.3 Wasch- und Pflegemittel • Verwenden Sie nur speziell für Waschmaschinen bestimmte Wasch- und Pflegemittel.
www.aeg.com 15.2 Reinigen der Außenseiten Reinigen Sie das Gerät nur mit warmem Wasser und mit etwas Spülmittel. Reiben Sie alle Oberflächen sorgfältig trocken. VORSICHT! Verwenden Sie keinen Alkohol, keine Lösungsmittel und keine Chemikalien. 15.3 Waschgang zur Pflege der Maschine Bei Waschprogrammen mit niedrigen Temperaturen kann etwas Waschmittel in der Trommel zurückbleiben. Führen Sie regelmäßig einen Waschgang zur Pflege der Maschine durch: • Entnehmen Sie die Wäsche aus der Trommel.
DEUTSCH 3. 4. 5. 6. 21 Entfernen Sie den oberen Teil des Pflegemittelfachs. Reinigen Sie alle Teile mit Wasser. Reinigen Sie das leere Einschubfach mit einer Bürste. Schieben Sie die Waschmittelschublade wieder in das Einschubfach ein. WARNUNG! 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2. Entfernen Sie den Filter nicht, während das Gerät in Betrieb ist. Reinigen Sie die Ablaufpumpe nicht, wenn das Wasser im Gerät heiß ist. Das Wasser muss abgekühlt sein, bevor Sie die Ablaufpumpe reinigen.
www.aeg.com 3. 4. 5. 1 6. 2 2 1 15.8 Zulaufschlauchfilter und Ventilfilter Die Filter müssen in folgenden Fällen gereinigt werden: • Es läuft kein Wasser in das Gerät. • Das Wasser läuft sehr lange in das Gerät ein. Stellen Sie einen Behälter unter die Ablaufpumpe, um das auslaufende Wasser aufzufangen. Drücken Sie die zwei Hebel und ziehen Sie den Ablaufkanal nach vorn, um das Wasser auslaufen zu lassen.
DEUTSCH 23 So reinigen Sie die Wasserzulauffilter: Schließen Sie den Wasserhahn. Entfernen Sie den Wasserzulaufschlauch vom Wasserhahn. 3. Reinigen Sie den Filter im Zulaufschlauch mit einer harten Bürste. 1. 2. 4. 5. 6. 20° 45° 7. Entfernen Sie den Zulaufschlauch von der Geräterückseite. Reinigen Sie den Filter im Ventil mit einer harten Bürste oder einem Handtuch. Bringen Sie den Zulaufschlauch wieder an.
www.aeg.com WARNUNG! Vergewissern Sie sich vor einer erneuten Benutzung des Geräts, dass die Temperatur mehr als 0 °C beträgt. Der Hersteller ist nicht verantwortlich für Schäden, die durch niedrige Temperaturen entstanden sind. 16. FEHLERSUCHE Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zunächst eine Lösung für das Problem zu finden (siehe Tabelle). Wenn Sie keine Lösung finden, wenden Sie sich an den Kundendienst. • - Das Gerät pumpt das Wasser nicht ab.
DEUTSCH Problem Mögliche Ursache Mögliche Abhilfe Der Wasserablaufschlauch ist nicht richtig angeschlossen. Vergewissern Sie sich, dass die Schlauchverbindung in Ordnung ist. Ein Waschprogramm ohne Abpumpphase ist eingestellt. Stellen Sie das Abpumpprogramm ein. Die Funktion Spülstopp ist aktiviert. Stellen Sie das Abpumpprogramm ein. 25 Die Gerätetür steht offen oder ist nicht richtig geschlossen. Schließen Sie die Tür richtig. Die Aquasafe-Einrichtung ist aktiv. • Schalten Sie das Gerät aus.
www.aeg.com Problem Mögliche Ursache Mögliche Abhilfe Der Wasserablaufschlauch ist beschädigt. Vergewissern Sie sich, dass der Wasserzulaufschlauch nicht beschädigt ist. Die Tür des GeEin Waschprogramm räts lässt sich nicht läuft. öffnen. Warten Sie das Ende des Waschprogramms ab. Es befindet sich Wasser in der Trommel. Stellen Sie das Abpump- oder Schleuderprogramm ein. Das Gerät ist nicht ausgerichtet. Richten Sie das Gerät waagrecht aus. Siehe hierzu „Montage“.
DEUTSCH 27 17. MONTAGE 17.1 Auspacken 1. Verwenden Sie Handschuhe. Entfernen Sie die äußere Folie. Benutzen Sie, falls erforderlich, ein Teppichmesser. 2. Nehmen Sie die Karton-Abdeckung ab. Entfernen Sie die Styropor-Verpackungsteile. 3. 4. Entfernen Sie die innere Folie. 5. Öffnen Sie die Tür. Entfernen Sie das Styroporteil aus der Türdichtung und alle Teile aus der Trommel.
www.aeg.com 6. Legen Sie eines der Styroporverpackungsteile hinter dem Gerät auf den Boden. Legen Sie das Gerät vorsichtig mit der Rückseite darauf ab. Achten Sie darauf, die Schläuche nicht zu beschädigen. 7. Entfernen Sie den Styroporschutz von der Geräteunterseite. Ziehen Sie das Gerät nach oben, sodass es wieder aufrecht steht. 8. 1 2 9. Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen. 10. Lösen Sie die drei Schrauben.
DEUTSCH 29 12. Setzen Sie die Kunststoffkappen in die Öffnungen. Diese Kappen finden Sie im Beutel mit der Gebrauchsanleitung. WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren. 17.2 Aufstellen und Ausrichten x4 • Stellen Sie das Gerät auf einen ebenen, festen Boden.
www.aeg.com 17.3 Wasserzulaufschlauch • Schließen Sie den Schlauch am Gerät an. Drehen Sie den Wasserzulaufschlauch nur nach links oder rechts. Lösen Sie die Ringmutter, um ihn in die gewünschte Position zu bewegen. 20 O 45 O • Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"-Außengewinde an. VORSICHT! Achten Sie darauf, dass die Anschlüsse dicht sind. Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist.
DEUTSCH 31 17.4 Wasserablauf Es gibt mehrere Möglichkeiten, den Ablaufschlauch anzuschließen: Mit der Kunststoff-Schlauchführung. • Über eine Waschbeckenkante. • Stellen Sie sicher, dass die KunststoffFührung beim Abpumpen nicht abrutschen kann. Befestigen Sie deswegen die Führung am Wasserhahn oder an der Wand. • An ein Standrohr mit Entlüftungsöffnung. Orientieren Sie sich an der Abbildung. Direkte Einleitung in ein Ablaufrohr auf einer Höhe nicht unter 60 cm und nicht über 100 cm.
www.aeg.com • Direkte Einleitung in ein Abflussrohr in der Zimmerwand. Mit einer Schlauchschelle befestigen. Sie können den Ablaufschlauch auf maximal 400 cm verlängern. Fragen Sie beim Kundendienst nach einem anderen Ablaufschlauch und der Schlauchverlängerung. 18. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte.
DEUTSCH 33
www.aeg.
DEUTSCH 35
132923060-A-172012 www.aeg.