User manual

30 www.aeg.com
DAILY USE
12.6 Starting a programme
without the delay start
Press button Start/Pause to start the
programme.
The relevant indicator stops to fl ash
and stays on.
On the display the indicator of the
phase is operation starts to fl ash.
The programme starts, the door is
locked. The display show the indicator
.
INFORMATION
The drain pump can operate for a
short time when the appliance fi lls
water.
12.7 Behaviour of the appli-
ance
INFORMATION
After approximately 15 minutes from
the start of the programme:
• The appliance adjusts automati-
cally the cycle time to the laundry
you have put in the drum to have
perfect washing results in the mini-
mum necessary time.
• The display shows the new time
value.
12.8 Starting a programme
with the delay start
1. Press button Zeitvorwahl again
and again until the display shows
the number of minutes or hours of
delay.
The related indicator comes on.
2. Press button Start/Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
INFORMATION
Before you press button Start/
Pause to start the appliance, you
can cancel or change the set of the
delay start.
12.9 Cancelling the delay start
To cancel the delay start:
1. Press button Start/Pause to set the
appliance to pause.
The related indicator fl ashes.
2. Press button Zeitvorwahl repeat-
edly until the display shows
.
3. Press button Start/Pause again to
start the programme immediately.
12.10 Interrupting a pro-
gramme and changing a op-
tion
You can change only some options
before they operate.
1. Press button Start/Pause.
The related indicator fl ashes.
2. Change the option set.
3. Press the button Start/Pause again.
The programme continues.
12.11 Cancelling a running
programme
1. Press button Ein/Aus to cancel the
programme and to deactivate the
appliance.
2. Press button Ein/Aus again to acti-
vate the appliance.