User manual

39ENGLISH
TROUBLESHOOTING
Problem Possible solution
The appliance does not
load water properly.
Make sure that the water tap is open.
Make sure that the connection of the water inlet
hose is correct.
Make sure that the water tap is not clogged.
Make sure that the water inlet hose has no kinks,
damage or bends.
Make sure that the fi lter of the water inlet hose
is not clogged. Refer to “Cleaning the water inlet
fi lter”, in “Care and cleaning” chapter.
Make sure that the pressure of the water supply
is not too low. For this information, contact your
local water authority.
The appliance does not
load water and drain im-
mediately.
Make sure that the drain hose is in the correct
position. The hose may be too low.
The appliance does not
drain the water.
Make sure that the connection of the drain hose
is correct.
Set the drain programme if you set a programme
without drain phase.
Set the drain programme if you set an option
which ends with water in the tub.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or
bends.
Make sure that the drain fi lter is not clogged.
Clean the fi lter, if necessary.
Refer to “Cleaning the drain pump”, in “Care and
cleaning” chapter.