User manual

2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set
option comes on.
If you set something incorrect,
the display shows the
message Err.
13.6 Starting a programme
without the delay start
Press button Départ/Pause to start the
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the door is
locked. The display show the indicator
.
The drain pump can operate
for a short time when the
appliance fills water.
13.7 Behaviour of the
appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the new
time value.
13.8 Starting a programme
with the delay start
1. Press button Départ Différé again
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Départ/Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Départ/Pause to start the
appliance, you can cancel or
change the set of the delay
start.
13.9 Cancelling the delay start
To cancel the delay start:
1. Press button Départ/Pause to set the
appliance to pause.
The related indicator flashes.
2. Press button Départ Différé
repeatedly until the display shows
.
3. Press button Départ/Pause again to
start the programme immediately.
13.10 Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1. Press button Départ/Pause.
The related indicator flashes.
2. Change the function set.
3. Press the button Départ/Pause again.
The programme continues.
13.11 Cancelling a programme
1. Press button Marche/Arrêt to cancel
the programme and to deactivate
the appliance.
2. Press button Marche/Arrêt again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in
the detergent compartment, if
not fill the detergent again.
www.aeg.com18