User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. PROGRAMMES
- 6. CONSUMPTION VALUES
- 7. OPTIONS
- 8. SETTINGS
- 9. BEFORE FIRST USE
- 10. DAILY USE
- 10.1 Loading the laundry
- 10.2 Filling the detergent and additives
- 10.3 Check the position of the flap
- 10.4 Activating the appliance
- 10.5 Setting a programme
- 10.6 Starting a programme without the delay start
- 10.7 Behaviour of the appliance
- 10.8 Starting a programme with the delay start
- 10.9 Cancelling the delay start
- 10.10 Interrupting a programme and changing a function
- 10.11 Cancelling a programme
- 10.12 Opening the door when the programme operates
- 10.13 Opening the door when the delay start is active
- 10.14 End of cycle
- 10.15 Draining water out after end of cycle
- 10.16 AUTO Stand-by option
- 11. DAILY USE - DRYING
- 12. DAILY USE - WASHING & DRYING
- 13. HINTS AND TIPS
- 14. CARE AND CLEANING
- 15. TROUBLESHOOTING
- 16. TECHNICAL DATA
CAUTION!
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
10.2 Filling the detergent and
additives
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
Always obey the instructions
that you find on the
packaging of the detergent
products.
10.3 Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
1
2
3. To use powder detergent, turn the
flap up.
A
4. To use liquid detergent, turn the flap
down.
B
ENGLISH
17